Frog from plastic bottles. How to make a frog out of plastic bottles in various ways? Frog from a plastic bottle with hands

Creative people have long learned to use various materials to bring their ideas to life. And not only natural, but also man-made. For example, plastic. The industry produces them in large quantities. They are used in many products. For needleworkers, they are good because they have a variety of shapes and colors.

Plastic bottles have gained immense popularity both in everyday life and for decorating a house or garden. Their life could be short (after all, they are intended for one-time use), if not for the imagination of the craftsmen. They are able to give bottles a second life, and at the same time rid the environment of pollution. And the inexhaustibility of human imagination and the variety of interesting ideas is simply amazing.

Today our idea is a frog, see the master class below. The most common bottle color is green.

And who is green? That's right, frog.

So the idea came up how to make a frog out of a plastic bottle. Step-by-step instructions with photos will help you visually understand the process.

It will not be just a frog that serves as a room decoration. This will be a frog box made of plastic bottles, the master class of which we tried to describe as clearly as possible.

We will need:

narrow tape
plastic bottles of 2 l - 2 pcs.
sharp knife
scissors
sharp awl
centimeter
needle and thread
zipper
felt-tip pen or marker
acrylic paint
brush
wine bottle cork

Frog from plastic bottles: the manufacturing process

Take a bottle and measure seven centimeters from the bottom. Tape the bottle on this line. If you need a more capacious box, you can step back more, but it will not look very beautiful and proportionate. Then cut off the bottoms, focusing on the upper border of the adhesive tape.

Now it is necessary to mark the points of punctures of the future seam of sewing on the fastener. Mark the points with a felt-tip pen at a distance of 5-7 cm from the edge. The distance between the points is about 1 cm. Then, with an awl, make punctures at the marked points. Be careful not to hurt your fingers. After that, the tape can be removed.

We take our zipper in the closed state, wrap one of the parts of the bottle with it and temporarily attach it with the same adhesive tape so that it does not slip off. And now we sew the clasp along the already prepared holes. Now you can tear off the tape, close the ends of the threads nicely and cut them off. To sew the second part of the "lightning" to another bottle, it will have to be unfastened. Here is what the part should look like at this stage.

A wine cork is needed so that our frog princess can see this world with her own eyes. Cut it in half, paint it green and glue it to the frog's head.

After the glue is completely dry, you can use our box. This is how the finished craft Frog made of plastic bottles looks like with your own hands.

Now here you can add everything you need and unnecessary. See what options for green frogs from a plastic bottle made by craftsmen can be. They are all very different. Surely, your frog will be the most beautiful and unique.

If our master class seemed not very clear to you, you can watch video instructions and master classes below, with the help of which you will definitely get a similar box or even better. You can also find a lot of other thoughts and ideas there.

Figurines and sculptures, including those made by hand, bring a certain amount of originality and comfort to the design of the garden plot. A popular material for making crafts is bottle plastic. It is soft, easy to cut, dye, glue and sew, but at the same time retains its shape for a long time.

Making a frog from plastic bottles with your own hands

Numerous original ideas for the use of plastic bottles are born from a huge amount of this practical and affordable material. You can easily make a variety of crafts from it, including interesting animal figurines, for example, a funny frog. This is one of the easiest plastic molds to make.

It is interesting! In Slavic mythology, the frog is associated with fertility, moisture, and rain. She is considered a talisman that brings good luck and wealth. Therefore, the more green inhabitants there are in your garden, the richer the harvest in the garden will be and the wealth in the house will be stronger.

Necessary materials and tools

To make a plastic frog, you need to prepare the following materials at hand:

two plastic bottles of the same shade and shape;
paints for outdoor works of various colors. Must have green paint.
brushes;
marker and scissors;
glue gun, strong thread with a needle or wire.

The same color of the bottles is needed so that the individual elements of the craft after staining have the same shade.

Stages of making a frog

Let's start creating the frog:

Labels and adhesive residues must be removed from plastic bottles. This is easy to do by soaking the containers in warm water.
We make blanks for the body. To do this, cut off the bottoms of each bottle at a height of at least 10 cm.
By changing the length of the resulting two parts, you can shorten or lengthen the future frog
The remaining parts of the bottles are cut lengthwise and aligned as much as possible.
Preparing a sheet of bottle plastic for cutting paws
With a felt-tip pen, we draw the shape of the rear and then the front frog legs on the resulting plastic sheet and cut out two identical blanks.
It is better to draw the shape of the paws on paper in advance, but if you are an experienced artist, the outlines can be immediately applied to a plastic bottle with a marker or felt-tip pen
We connect the paws to the body with glue, wire or thread.
We sew the back parts to the upper half of the body, and the front parts to the lower half.
We insert the bottoms into each other so that the torso is obtained. Attached with glue for strength.
We paint the finished craft in two layers.
Coloring in two layers does not allow the frog to shine through in the sun

Do not forget to place weighting material inside the body: pebbles or a few handfuls of dry sand. This is necessary so that in open space the craft is not blown away by the wind.

decoration

After decorating, the appearance of the frog will take on a finished look. An additional coating of crafts with facade varnish will fix the paint, prevent it from being washed off by rain and discoloring under the influence of sunlight.

Frogs can be different

Frogs that will find their place in your country house can be done in other ways:

on a plastic bottle, the contours of the future frog are drawn with a marker, then the top of the bottle is cut off along the drawn lines. Paws are cut out of the remains of the bottle and glued to the base of the frog. The eyes, mouth, and nose of the frog can be drawn on with a marker or cut out from self-adhesive tape in a suitable color. In such a stand, you can store small items and inventory, and if the container is large enough, then use it for planting flowers or other greenery;
To make the craft stable, you can pour a little gypsum on the bottom
if the two bottoms of plastic bottles are not glued together, but connected with a zipper, you get a cute frog-box with an opening mouth, which can also be used to store small things. The zipper is pre-fixed on the workpiece with adhesive tape, and then sewn with neat and even stitches;
You can not paint such a frog, but use green plastic bottles for its manufacture

it’s a little more difficult to make a frog out of plastic containers and polyurethane foam. In this case, the frame is first assembled, foamed, and then the excess foam is cut off. The resulting figure must be given the outline of a frog, and then painted with bright colors.

The finished figure must be covered with furniture clear varnish so that it is resistant to all weather conditions.

Video: we make a frog from plastic bottles with children

Craft in the composition of the garden

After making the figurine, you need to choose a suitable place for it on the site and make an interesting compositional solution:

it’s good if you make more than one frog princess, but pick a pair for her. Frogs are recommended to be placed on a hill, surrounded by greenery;
You can simulate a dry reservoir with the bottoms of plastic bottles, painting them blue
crafts from plastic bottles are not afraid of snow and frost, so they can not be removed for the winter. With their brightness, they will refresh the untouched whiteness of the site.
Dacha owners should not worry about the safety of plastic living creatures, it is unlikely to attract the attention of vandals

In addition to ease of execution, a plastic frog has other advantages: it is durable, practically does not require material costs. A neat craft, made with a sufficient amount of patience and imagination, can be put on public display. Neighbors, fascinated by the perky smile of the frog princess, will definitely come to you for a master class on how to make it.

As you know, statistics know everything, so they probably know how many plastic bottles each year is thrown into the trash by each of us. And even without serious research, it is clear that this figure is quite impressive. That is why many craftsmen are trying to invent a variety of ways to use plastic bottles. Among them, the palm belongs to the creation of crafts for decorating the house and garden, as well as various toys. For example, a frog made of plastic bottles will bring a lot of joy to the kids. Making it with your own hands is quite simple. Depending on the option, it can serve as a box for storing any little things or decorate an artificial pond in a summer cottage.

Frog princess from a plastic bottle: step by step instructions

To make such an original craft for decorating a garden, you will need the following components:

two plastic bottles with a capacity of 2 liters;
acrylic paint in black and green;
sharp knife (scissors), glue.

Progress:

labels are removed from the bottles, the containers are well washed and dried;
cut off the bottoms at a height of 10 cm;
on parts of bottles with a neck, draw 2 paws and cut them out;
paint all the details, including the bottoms, from the inside, so that in the future the paint does not fade or wear out;
waiting for the paint to dry;
glue the bottoms so that a head with a body is obtained, after pouring a little earth or a handful of pebbles into the lower part so that the figure is not blown away by the wind;
glue paws and draw a muzzle with eyes, mouth and cilia;
if desired, a crown is cut out of another plastic bottle, dyed golden and put on the frog's head and fixed with glue.

Movable Frog Princess

Instead of a garden decoration in the previous way, you can make a toy. This will require:

two two-liter plastic bottles;
paints and scissors;
half-liter plastic bottle, preferably transparent and colorless;
wire and awl.

A movable frog from a plastic bottle is made quite simply. First make a crown. To do this, turn the half-liter bottle upside down and cut out the rays. The result is a crown, at the base of which is a bottle neck. Then the head and body of the frog are made as in the first case, and the paws are cut out. On the paws, holes are made in the upper parts. Fix them on a plastic bottle, making holes in the right places and fixing the parts with wire. Do the same with the crown.

At the end, they draw a muzzle, make holes behind the crown on the back of the frog's head and thread a ribbon on which the frog can be hung in the children's room.

What you need to make a toy container

Many people prefer to create crafts that have an applied purpose. For example, you can make a container frog. It will be possible to store small items, such as keys, in it. For this you will need:

two plastic green two-liter bottles;
paints and markers;
transparent glue;
one-piece red zipper;
scissors;
white paper tape.

We create with children

If you want to entertain a child, then make some crafts with him. For example, a funny frog made from a plastic bottle would be a good option. The step by step instructions below are very clear. Need to:

cut off the ends of two plastic bottles of the same size;
cut a tongue out of red glossy paper;
make eyes or purchase such parts in a specialized store;
glue the bottoms by placing a tongue between them;
stick eyes on the frog's head using double-sided tape;
if you wish, color the toy
for greater strength, stick the crafts to the junction of the bottle bottoms, with the exception of the place where the tongue is glued, wide transparent adhesive tape.

How to make a frog from a plastic bottle in the form of a container

To make such an original craft, which can be an interesting gift from a child to a grandfather, grandmother or other relative, you need:

cut off the bottom of the bottles at a height of 7 cm;
grease the edges of the bottoms with glue;
glue a red zipper to represent the frog's mouth;
wipe off excess glue;
if you wish, paint the body of the frog with paints;
draw eyes on white paper tape;
cut them out and stick them on the top bottom of the bottle.

"Voracious Frog"

From a plastic bottle, you can make a toy that will capture the attention of your baby for a long time. To do this, you will need: acrylic paint, brushes, a knife, glue, double-sided tape, string and a small ball. Such a frog made of plastic bottles (see photo below) consists of two parts: a frog's head with an open mouth and a bug on a string.

It is better to make such a craft together with a child. If he already goes to school, then he can be entrusted with the manufacture of an insect and some other parts of the toy.

Operating procedure

First of all, a frog should be cut out of plastic bottles.

Step-by-step instruction:

a line is applied to the surface of a plastic bottle at a distance of 20 cm from the neck;
draw two semi-ovals directed towards the bottom, at a distance of 3 cm from each other, which will serve as eyes for our frog;
stepping back from the ovals to the right and left by 5 cm, the contours of the folded legs are applied with a marker;
cut out all the details and bend them outward so that the result is a funnel with eyes and paws;
paws and eyes are painted with green paint;
draw a green strip 3 cm wide along the edge of the funnel;
make out the eyes by gluing details in white and black or by painting squirrels and pupils with acrylic paints;
cut a long strip of plastic and fold it to make a curl resembling a frog's tongue;
paint this part red;
glue the tongue.

Next, a bug is made from the remains of the bottle. To do this, wings cut out of plastic are glued onto the ball and painted, for example, in red, adding black spots to make a ladybug. They attach the ball to one end of the rope, pull it through the neck outward, then through the hole in the lid and tie it in a knot.

Everybody! It turned out an original toy - a frog made of plastic bottles. With your own hands, you can make several of these "grabs" and arrange competitions in kindergarten. Exercises with the frog-grabber will help to coordinate the movements of the baby and bring him a lot of joy.

green glass

Want to learn how to make a frog out of a plastic bottle? Everything is very simple. If you are going to make a craft to hang it, for example, on the wall in the bathroom, then it is recommended to use a green plastic bottle with a tapering neck, flattened on both sides, from a shampoo or detergent. As for the desktop version, a round bottle is also suitable.

Procedure:

At a distance of 10-15 cm from the bottom of the bottle, the contour of the frog's head is applied with a marker with legs raised up, and then the eyes and cheeks are glued.

With acrylic paint, using a thin brush, draw a mouth and dots representing the nostrils.
From the rest of the plastic bottle, paws are cut out, which are glued to the glass, leaving the “fingers” of the wah free.
Flowers are cut out of multi-colored paper or colored oilcloth and decorated with a glass.

If such a frog was made from a plastic bottle to decorate a child's desktop, then pencils are placed in it. For wall options, it is also necessary to make two holes for nails on the side opposite the one where the wah's head is located.

Lids option: what you need

There are many answers to the question of how to make frogs from plastic bottles. Instructions for the manufacture of one of the options are presented below.

A distinctive feature of this craft is the use of not only bottles, but also their caps.

Would need:

one bottle;
stapler;
green cardboard;
scissors;
two bottle caps, preferably green;
scotch;
green paint;
doll eyes;
tassel;
glue gun.

Lids option: how to work

The frog is made in the following order:

cut the bottle into two parts at a height of 8 cm from the bottom;
cut out the head from the top as shown in the photo;
all parts are covered with green paint from the inside;

two protruding "tongues", which are located behind the mouth, are fastened with a stapler to make a flattened mouth;
all details are painted on the inside with green acrylic paint and wait until it dries;
the back is put on the mouth and secured with transparent tape;
with a glue gun, lids and eyes are fixed on the body of the wah;
stick cardboard paws under the belly of the frog.

jumping frog

Any child loves toys that can move. For example, a frog made from plastic bottles (the instructions will help you make it in a matter of minutes) jumps funny as soon as you lightly press on its head.

For work you will need:

green plastic bottle, you can take both transparent and opaque;
glue gun;
white silicone or rubber ball (not hollow!);
sharp scissors;
acrylic paints.

A plastic bottle frog that can bounce is made like this:

Cut off the neck of the bottle at the point where it takes the form of a cylinder.
The resulting large “glass” is cut along the entire length into 6 strips, not reaching the bottom by 5 cm. You should get 5 strips of equal width and one - 2 times wider than the others (the latter should be under one of the tubercles at the bottom of the bottle, which will depict frog nose).
Cut off a wide strip at a right angle and two more according to the “through one” principle.
Fold all the strips inward, wrapping so that you get the legs.
The ball is cut and glued onto the frog's head on both sides of the "spout".
Pupils, nostrils and a mouth are drawn, in which a small slit is made and a part is inserted in the form of a tongue, painted in red.

tall frog

Such crafts for decorating the garden will turn out if you just cut off the neck of the bottle and turn it upside down.

Then, on both sides of one of the tubercles at the bottom, two halves of a white rubber ball are glued, on which pupils are drawn. Two paws, a “smile” and a tongue are cut out of another bottle.

The bottle is buried in the ground. Glue the prepared parts. Painted with acrylic paint. Install a few pebbles around the base of the craft so that the bottle does not blow away.

Such a plastic bottle frog can also be used as a lamp if you install a small light bulb or spotlight garland inside.

Any frog from plastic bottles, the master class of which is presented above, will bring a lot of joy to children, and some of them will be a wonderful decoration for a garden or summer cottage.

To make a frog from plastic bottles with your own hands, you need to prepare:

If you want to become the owner of a large specimen, it is better to take two containers of 2 liters each, a more compact frog craft will be obtained from two liter bottles. The shade and shape of the container must be identical.
To form the legs, you will need 1 more bottle, or you can use the remains of the body of the future frog.
The paint is chosen for external work, the craft should not be afraid of moisture. LKM, intended for cars, have special strength. Green color is required, the rest is at the discretion of the master.
If the paint is not spray paint, prepare brushes.
Marker and scissors.
Needle with thread and wire.

Attention! The same color of plastic bottles contributes to a uniform modification of the color of the frog under the influence of the sun. Otherwise, individual elements of the craft may acquire a different shade over time.

creative process

A step-by-step instruction for making a frog includes the following items:

Then an interesting creative process begins, when the craft is given a certain image. Eyes with cilia can be painted with paints or plastic blanks can be purchased at a specialized store and glued on. The mouth is usually decorated with paints or a marker.

Advice! The problem of light weight crafts is solved quite simply. Before the body of the frog is formed from two plastic blanks, pebbles or just earth are placed inside. The heaviness at the bottom will protect the craft from the wind and will not turn it into a travel frog.

Landscaping is a place for creativity, so a princess frog can live on the site. It is also easy to make a crown from a plastic bottle, and then paint it in a golden hue. The part is screwed to the body with wire.

Conclusion

Naturally, one frog from a plastic bottle does not solve the problem of landscape design to decorate the site. Therefore, you should take care of the composition. First of all, it is recommended to make a couple for the princess. Making a male is even easier. Following the instructions described above, at the final stage, a cap made from a cork of a plastic bottle is attached to the head. You can draw a butterfly and the outlines of a tailcoat. Here fantasy knows no bounds.

And of course, you should take care of the surroundings. The easiest trick is to place the frogs on a raised platform surrounded by greenery. With a little effort, you can arrange a dry pond. To do this, pebbles, laid out in the form of a stream or a pond, are painted with blue paint. Complementing the site with water lilies, also cut from plastic bottles, the composition will become complete.

The abundance of plastic bottles in everyday life leads to the birth of numerous original ideas for their use. Crafts can carry a practical or purely decorative function. A wide field for the use of plastic is in the country. How to make a frog from plastic bottles, we will analyze in detail.

Plastic crafts in landscape design

Spending time at the dacha in the older generation often evokes associations with hard work. You can refuse stereotypes at any age and devote part of the time to the landscape design of the site. Not everyone can afford exquisite sculptures, fountains and bowls. Simple crafts made from waste material will help you get aesthetic pleasure from staying in the country. A vivid example in the literal and figurative sense can be a frog made of plastic bottles.

Juicy colors for a long period will please both the grandchildren who came to visit, and the owners of the dacha themselves. Products based on plastic bottles have a lot of advantages:

Their production requires a minimum of funds. For example, for a frog, you only need to purchase paint, everything else is in the house of every owner.
A simple design process can be mastered by both a small child and an experienced woman.
Creative gatherings bring the family together. And frogs based on plastic bottles will please the eyes of others for a long time.

Dacha owners should not worry about the safety of plastic living creatures, it is unlikely to attract the attention of vandals. But even in winter, when the charms of landscape design are covered with snow, a plastic bottle frog will refresh the pristine whiteness of the site.

We make a princess frog

The image of the frog is chosen differently - a shy princess or a mischievous frog. The initial stage for all characters has no differences.

Preparatory Steps

To make a frog from plastic bottles with your own hands, you need to prepare:

If you want to become the owner of a large specimen, it is better to take two containers of 2 liters each, a more compact frog craft will be obtained from two liter bottles. The shade and shape of the container must be identical.
To form the legs, you will need 1 more bottle, or you can use the remains of the body of the future frog.
The paint is chosen for external work, the craft should not be afraid of moisture. LKM, intended for cars, have special strength. Green color is required, the rest is at the discretion of the master.
If the paint is not spray paint, prepare brushes.
Marker and scissors.
Needle with thread and wire.

Attention! The same color of plastic bottles contributes to a uniform modification of the color of the frog under the influence of the sun. Otherwise, individual elements of the craft may acquire a different shade over time.

creative process

A step-by-step instruction for making a frog includes the following items:

Advice! The problem of light weight crafts is solved quite simply. Before the body of the frog is formed from two plastic blanks, pebbles or just earth are placed inside. The heaviness at the bottom will protect the craft from the wind and will not turn it into a travel frog.