How to glue large stickers. Decorative stickers for the interior: what to stick on the walls? Chips in the finish

Let's consider in more detail the external tuning of a car with the help of car stickers!

Stickers are one of the easiest and most inexpensive ways to add some zest to a car, attract attention, and inform others about the special status of a car.

Depending on the purpose, there are such types of stickers as:

• Graphic car stickers - a variety of graphic drawings and collages give free rein to self-expression and more subtly emphasize the inner world of the car owner.
• Promotional - contain information of an advertising nature, for example, about the sale or purchase of goods with contacts.
• Informational - these include stickers of taxi services, driving schools, government agencies.
• Signs - they are glued, for example, novice drivers or parents carrying a baby in the cabin.
• Humorous - you must have met motorists on the roads whose cars have inscriptions like “I often confuse pedals” or “First day behind the wheel”.

Films (glossy and matte) are also divided into:

• special high-quality (designed only for application on glass),
• reflective (visible at night),
• light-accumulating (accumulate the energy of sunlight during the day and give it away at night in the form of a beautiful glow).

How to stick a sticker on a car - step by step instructions

For self-gluing, you will need the following tools:

• glass cleaner, as well as a special tool if there are bitumen stains on the car,
• a clean rag made of synthetic suede,
• mounting tape,
• ruler or tape measure
• squeegee or plastic card,
• scissors,
• It is advisable to take a friend to help.

The temperature indoors or outdoors must be at least +10C. It is undesirable to carry out work in rainy wet weather.

Operating procedure:

1. Spray the glass with a glass cleaner and wipe it dry with a cloth.

If the situation suits, we apply a couple more strips of fixing film. Instead of a mounting film, you can use ordinary mounting tape. To make it easier to stick the auto-sticker, it is better to place the fasteners on the side of the central axis. This will allow you to stick first one half of the sticker, and then the second without creases.

3. Unfasten the fasteners on one side and start remove backing from sticker. We bend the edge of the substrate and begin to carefully remove it. We do this until the middle of the sticker.

4. We glue half of the sticker and iron it with a plastic card, moving from the center to the edge. When “bubbles” appear, the unsmoothed part can be peeled off and corrected.

5. Remove the fastening tape, since the sticker is already securely fixed.

6. Remove the paper backing from the second half of the sticker.

7. Glue the second half to the glass and iron again with a plastic card.

8. Peel off the transparent layer and slowly pull along the surface. We make sure that all the elements of our drawing remain on the glass.

At the end of the work, we iron a couple of times with a plastic card on the surface.

VIDEO INSTRUCTION

• Rectangular and elongated stickers are easier to start sticking from the narrowest side.
• Within 2 weeks, do not wash the glass under a pressure washer. This is necessary so that the adhesive layer has time to fully polymerize.
• On the first day, give up fast driving - there is a high risk that the work will have to be done again.
• If you decide to remove the sticker, heat it with a hair dryer (you can use a regular one, but an industrial one is better), and then it will come off easier. The adhesive remaining after removal can be removed with a solvent and a rag.
• On dark-colored vehicles, the outline of the sticker will remain visible, as the paint will burn out a little during this time. To prevent this from happening, change the location of the sticker every six months.
• Expect that the average life of the film is about 2 years.

Sticker Notes

STICKERS: INSTRUCTIONS FOR USE

Primarily, where are we going to stick the vinyl sticker?

The pattern is simple - the smoother the surface, the better the sticker will stick. The side of the car, glass, mirror, system unit, refrigerator, bathroom tiles, laptop surface are ideal for a sticker. Lacquered wood (cabinet doors, headboard, door) - very good. Painted at one time plaster with tangible grains of sand - hardly. Textured surfaces such as rattan or wallpaper with a pronounced textured pattern are not worth taking. It will also work to stick, but it should be remembered that paper wallpapers are quite suitable, but if you get tired of the vinyl sticker, you can take it back along with the wallpaper. If you are not sure, you can do it simply - pretending that a young relative is waiting for you in the vestibule, buy some kind of plant with a sticker in the store or just a sticker with Spiderman and experiment at home in an inconspicuous area behind the battery. If a small sticker adheres to a given surface, a large beautiful interior sticker will also adhere. If not, then no.

As for non-straight surfaces. Quite realistically and without problems, you can fit the edge of your refrigerator, that is flat surface. But if, after a round-the-world trip, you have seriously clarified the world map and are going to fix the globe - that is, cover the surface with a sticker convex- it will be extremely difficult to glue the new outlines of the continents without bubbles, wrinkles or overlaps ..

How to stick a sticker?

The main thing is to smooth more carefully. Any glue has a period of so-called adhesion, i.e. adhesion to the surface. If the vinyl sticker is crooked, you can take it off immediately and re-stick it. But if you decide to do it in a week, it will be much more difficult to tear it off, most likely you will deform it. So if, for example, a rabbit lives in your house and eats wallpaper, don't let him be interested in the sticker for the first couple of days. Well, later he will only have to admire it with you.

Since we are talking about interior stickers, i.e. about the interior, then just in case, we clarify that it should be glued at a temperature of at least +10 +15. That is, in winter, gluing to the outside of the window glass is no chance. The glue will be hard and won't work.

How to glue a vinyl sticker on glass or transparent plastic?

The sticker is applied on the side from which the viewer will be. The vinyl sticker on the glass of the car is glued from the outside. On the door - it's up to you (just choose the side from which the door looks best). There is an option to stick two symmetrical vinyl stickers on both sides of the glass door.

Why exactly? - yes, simply because the wrong side always looks less ceremonial. There will almost certainly be bubbles, streaks, etc. And in the case of glass, the glare of light will interfere with viewing the sticker glued from the inside.

What is the vinyl sticker afraid of?

Well, maybe fire. Vinyl behaves decently up to 40-50 degrees. That is, if you live in equatorial Africa, you should not decorate the roof of your car with a vinyl sticker. It makes no sense to glue on the lid of the stove, on the kettle. Perhaps not worth the battery, even if it is very smooth. Soon such a sticker will become like a girl after 70 - it seems to be nothing, but it hangs there, then it wrinkled, in general, ugh. If you want to buy a sticker for a laptop, then in principle you can not be afraid of anything, except, of course, a rough physical impact on the laptop case.

Is the vinyl decal water resistant?

No, not herself, not her glue. Many technologists even prefer to glue with water, lightly spraying the future work surface from the spray gun. Water is then expelled from under the vinyl sticker with a squeegee, but it helps to better level it. So, if you like to take a shower in such a way that the water is then drained not only from the bath, but from the entire bathroom, you can safely decorate the tiles with shipwreck stickers or a Pamela Anderson sticker in a tight swimsuit.

Unfortunately, the vinyl sticker is afraid of solvents. That is, of course, in everyday life people do not often wash the walls with white spirit, but if your kid painted a beard and mustache on the wall, it’s better to wash them off with alcohol. (Vodka, if anything - it's useless. It's weak).

The vinyl sticker is also not afraid of cold. For example, in winter, vinyl must withstand -30. True, if you decorated your car, you should avoid Karcher, sooner or later he will support the edge, and then off we go ...

What to consider when choosing a vinyl decal?

Consider such a purely compositional nuance as free space from the edge. For example, if you decide to decorate the refrigerator door with a Khokhloma painting sticker, do it over the entire area. But if you depict a lone hanging mouse on it, it is better that it be slightly smaller than the door. So the stickers of the sticker will be better visually perceived, which will save you from the problem - there it started a little closer, and on the second side it is around the corner of the climber.

Regarding the color of the vinyl sticker.

Each monitor renders color slightly differently than the other. Designers usually have perfectly calibrated monitors. And on liquid displays, the color can generally “walk” from the middle to the edge. Therefore, if you are trying to match a vinyl sticker, for example, to perfectly match the wallpaper, closet, then there is a chance that you will not succeed. Approximately such garbage turns out when, for example, you want to depict an hellish soton crawling out of the black-black depths of hell right in the middle of your black closet. The black-to-black border will most likely be a little noticeable. The white cut of the film will still be visible, but it can be painted over with a black permanent marker (this is best done while the sticker has not yet been applied so as not to inadvertently scratch the cabinet).

What to do? Is it possible to choose a color in principle? - actually there are a number of ways. There is, for example, a series of color vinyl films Oracal with perfectly clear shades. In whatever city you pick up a fan of these shades - you will see the same color. That is, if the image is made from this film, the future color can be specified as accurately as possible. But if we are talking about a printed image, and not about application with color films - alas.

(where can I get this fan of shades? - there is probably a company in your city that sells wallpaper or materials for outdoor advertising. You can go there and ask the seller - show me the fan of 641 oracles, by the way, how much does it cost? - while the seller answers - 300 rub., you can choose and remember the shade you need, and then say - aa, thanks, I'll think about it - and return the fan.)

How are vinyl decals made?

It can be one of three ways. If you decide to order something like a photo wallpaper - a full-color picture with a background, such as a map of Middle-earth - it will be a rectangular image on a white film or paper. If you chose a sticker with a single silhouette image - Bart Simpson on a skateboard, a purple tree growing from behind your sofa - this will be a sticker cut exactly along the contour. If you want to buy a sticker for a laptop, then it will be a full-color sticker with a rectangular outline with rounded corners, covered with a glossy laminate.

What are stickers made from?

Photowall-paper - from paper. They are glued in the same way as ordinary wallpaper, overlapping or end-to-end, with wallpaper glue, smoothed out with a crumpled towel or a special squeegee, then do not open the window for some time, etc.

A full color sticker (which has many shades) is usually printed on Orajet vinyl. The film is initially white; a pattern of any brightness and saturation is applied to it. If necessary, the vinyl sticker is additionally covered with a glossy laminate, which protects against scratches and other damage.

A pattern with a small number of colors and a clear border is often made from color films Oracal, 3M, Jac and the like. The image is created on the principle of application. Laminate is used less frequently here due to the complexity of the contour.

Oracal (color) and Orajet (printable white) vinyl films are essentially very close. The glue on them is of the same composition, the so-called removable, i.e. when the sticker is removed, it does not stay on the wall. However, sometimes, if the vinyl sticker has hung for several years, some part of the glue still dries to the surface of the sticker. In this case, it is easy to remove it - with a cotton swab with alcohol.

If you have your own ideas.

That is, you want to order an image not from our catalog, but, for example, decorate a laptop with a portrait of your dog or graffiti created by your talented friend - you should check the quality of the picture. In general, the larger it is, the better, but at the same time, of course, the higher the quality, the heavier the file, sometimes it is difficult to send it by mail. In general, there are 3 options:

1. if your picture exists as a file with the extension .cdr, .ai, .eps (vector image) - this is ideal, you don’t have to worry about the quality at all, it will be the best at any size
2. if it is .ipeg, .ipg, .tiff, .bmp, .psd (bitmap) - you should check the quality. First, the file size will help you. If the picture is full-length, and the file weighs 17 Kb, it is hardly worth expecting excellent quality. You can also bring the picture in the viewer closer to its natural size and analyze: if the face of Dr. House in the bath with Vicodin is still a face, and not four squares of different colors, then it will delight you on the wall. How to understand what size is natural? - for example, in Photoshop there is a ruler. Attach a second, real ruler to the screen and increase that virtual centimeter to the size of this ruler centimeter. The quality of the picture, which you will see in this case, will be true.
3. if the picture is on paper. Then your task is to scan it with a resolution of about 300 dpi (dots per square inch), send it to us and discuss your idea with us in a letter or via ICQ 163-77-44-44.

As for improving the initially poor quality.

Unfortunately, it is very limited. That is, if at the time of the photo session a fly sat on your nose, pretending that it never happened is a matter of three minutes. But to sharpen the spot in the corner of the photo so that it becomes clear that this is not a spot, but a fragment of a BMW 5 series of wet asphalt color, in the trunk of which lies a native of Senegal in torn blue jeans and with a tattoo under his left shoulder blade - this is, to unfortunately, only possible in the series The X-Files. Damn Hollywood tricksters have been spinning people's heads for years!

Beautiful nails and flawless manicure are the dream of any woman. This is not only a sign of grooming, but also a way to stand out from the crowd, to show your individuality. Today, the nail industry market offers a lot of original products, with the help of which any manicure acquires a special style and allows a woman to be in the spotlight. One of the most spectacular attributes of a perfect nail cover are sliders. What are their features and how to glue such stickers on gel polish?

Features of the decorative element

Nail sliders are one of the most popular manicure techniques. This term, translated from English, means "slide". These are special stickers, which are thin films with a pattern of various subjects. Due to the special composition, such films are securely fixed on the surface of the nail plate.

Slider design successfully replaces art painting, it looks flawless. Applied to gel polish and coatings on top with a fixative, it prolongs the life of a manicure, while not losing color saturation and glossy sheen.

The advantages of such a nail product include ease of use: you can design nails with stickers not only from a professional master in a beauty salon. Such pictures can become an adornment of all fingers or show off only on a few, which looks no less beautiful and impressive. They can be of different sizes, completely cover the surface of the nail plate or only the part chosen for the design. Such pictures are also appropriate on the jacket, if you stick them closer to the base of the nail.

Observing certain rules of application, you can decorate your nails with a manicure with sliders yourself at home. This saves time for painting nail plates, allows you to create both a full-fledged manicure and an emphasis on one finger.

Decorative stickers are safe for nails. They do not harm their structure, are applied easily and are rarely capricious when removed. In addition, sliders are freely available in many specialized stores, so it will not be difficult to buy them according to your preferences.

Such nail decorations have a wide price range, which allows you to choose both luxurious and expensive ones (from 500 to 1000 rubles) and more acceptable drawings (20 - 100 rubles), which are not inferior in beauty to expensive counterparts.

Depending on the type of stickers, they have different ways of gluing. Each technology has its own nuances, the violation of which will lead to the loss of an impeccable type of manicure.

The subject of the drawings

Colorful pictures can be bought at any cosmetic boutique. At the same time, their subject matter often strikes the imagination and baffles: you want to buy everything, no matter how beautiful it is. The most popular image motifs on such design elements are:

• animalistic drawings (all kinds of kittens, dogs, snakes, tigers, panthers, leopards, bears);
• birds (peacocks, seagulls, birds of paradise);

• ornaments (geometry, scalloped lace, stripes);
• prints (floral, abstract patterns, compositions with butterflies, reptile skin designs and animal skin color);
• lace (web, all kinds of lace patterns, made in one or more shades, imitation of textile textures);

• portraits (famous people, female faces, silhouettes);
• cartoon characters (relevant for young people);
• Japanese patterns (sakura, geisha, anime sketches, etc.);

• New Year's theme (snowmen, snowflakes, bullfinches, deer, Christmas compositions);
• fruits and berries (various patterns with one or more items);
• rock style (skulls, crosses and similar paraphernalia);
• glamor (hearts, bows, stars, gold or silver letters).

Patterns can be colored, monochrome, flat, with a small relief. Some drawings imply symmetry, others do not need it. Today, a free theme is more often used, in which accents are glued to just a few nails.

Kinds

Today, the choice of such products is quite wide. There are many varieties of stickers for nail design.

Aquatic

Water stickers are a thin film located on a white paper base. A feature of decals is the need to be based on a translucent base, so they need careful selection of the shade of varnish. The background should be in harmony with the color palette of the pattern and not merge with it into a single incomprehensible spot.

The disadvantages of this type of stickers include the likelihood of damage to the workpiece in the process of fitting it in size and shape.

Self-adhesive

Such drawings are a photo design (fragments with an adhesive surface located on a special substrate). Their feature is independence. In order to stick them, it is enough to separate the sticky layer and stick the fragment on the surface of the nail.

By themselves, stickers can represent individual items of a particular pattern or be a full-fledged object. They come in the form of a variety of sets of 10 plates, designed specifically to cover the entire area of ​​​​the nail. The sets created for the jacket are made in the form of stripes.

3D

Stickers of this type differ in volume. They are slightly convex, unlike the usual flat pictures. This kind of sliders can be a full-fledged decorative element or a nail accent.

These stickers are water-based and adhesive-based. In general, they are not difficult to work with, although sometimes difficulties may arise (when designing a manicure on the entire area of ​​\u200b\u200bthe nail). The presence of a small relief (bulge) does not interfere with everyday life, it does not scratch or cling to clothes and other objects.

The advantages of 3D stickers include the ability to combine them with other decorative design elements (such as regular stickers). They are easy to use and often look more beautiful than their counterparts. The disadvantages include the difficulty of removing the sticker when removing the coating. Special gel polish removers are not designed for such procedures, so this sticker will have to be scraped off.

Application methods

There are several methods for applying nail stickers. Each technique is unique in its own way, so you can choose the most optimal option. Implementing a slider design step by step is actually much easier than it might seem at first glance, it does not take much time.

Water based

The sliders are cut to the size of the nails, then lowered into the water. You can use a napkin soaked in water, attaching a cut-out fragment to it on one nail. The film with the picture will peel off easily in both cases.

On uncured gel polish

One of the most reliable slider design methods is the method when pictures are applied to a non-dried layer of pigment. Experienced craftsmen advise using a brush when smoothing the sticker. So the drawing will not tear and lie flat on the surface of the nail plate. The brush allows you to tightly fix the sticker to the base without air bubbles and waves.

The advantage of this method is excellent durability, as the coating layer dries along with the slider. The adhesion of the slider to the coating with this gluing option will be as strong as possible. Therefore, in this case, one layer of fixative (finish) is sufficient.

On top with a sticky layer

This method is very convenient and the easiest. Sliders are applied to the topcoat layer after the pigment. Unlike the base coat, the top coat has a denser and thicker consistency, which simplifies the procedure for applying pictures to the surface of the nail plates.

The sticker is straightened with a brush, and then fixed with a top coat. It is necessary to try so that the size of the sticker, if possible, does not go beyond the lateral borders of the nail plate.

For a finished manicure

This method allows you to update an already finished manicure. If the nails are painted with gel polish, but after a few days you want a change, this is the perfect solution. At the same time, it is not necessary to remove the old coating at all in order to change the design of the nails.

In this case, in order not to create an extra thickness of the coating and an unnatural look, it is better to stick the slider design on an ultrabond (acid-free primer). It does an excellent job of fixing stickers and will not create obstacles in work. After completing the design, you need to fix the manicure with a top coat without a sticky layer.

Photo design for long nails

In the process of work, you need to trim the stickers in shape and size that is most suitable for each specific nail. However, it is not scary if the film protrudes beyond the edge of the end of the nail: then it can be cut with scissors and, after drying, processed with a file.

Straightening the slider design with an elastic brush, you need to remove all voids. If the sticker does not fit well on the surface of the nail, small cuts can be made. Some experts use an orange stick to straighten the film with the design.

After gluing the film, it is fixed with a layer of topcoat without a sticky layer. It is better if the top is glossy: the look of the pattern will be more attractive. In addition, you should not stick such pictures on a dark base if the picture is faded and made in translucent muted colors.

Working with slider design will appeal to every woman, no matter what method of gluing pictures is chosen. The duration of the procedure will not take more than 10-15 minutes, provided that the work will be done calmly and accurately.

Not every experienced master can draw such patterns, and for much more time. The main rule of all stages of design is accuracy at every step. The technique of gluing water-based sliders is somewhat reminiscent of decoupage.

How long should you keep?

With the proper execution of the design, the stickers stay on the nails for at least two to three weeks and even more. The durability of such a manicure is affected by careful handling of the coating. This is especially true for household work, during which hands come into contact with water and aggressive detergents and chemicals.

In order not to have to wonder why the stickers do not stay on the nails for a long time and the beautiful coating quickly peels off, you need to follow all the rules of manicure with gel polish at each stage. It is important to perform all actions carefully, without defects. Any slightest imperfection in bonding will spoil the flawless appearance of the nails and eventually lead to the fact that the coating will have to be removed.

In addition, the durability of the colorful design with stickers is affected by the use of quality components in the work. It is better to buy gel polishes from reliable companies that are time-tested and have positive feedback from experienced craftsmen working with this type of coating.

The coating may shorten the durability in case of hormonal changes in the body during pregnancy. In addition, stickers may stay on the nails less if the nail plates themselves are unhealthy and very thin. A special strengthening gel can help thin nails, which does not need to be removed later by cutting.

How to translate at home?

Gel polish slider design technology requires knowledge of the techniques of the masters working in the salon. To prolong the life of a colorful design, you need to correctly and step by step follow all the instructions, starting from the very beginning.

Before applying the base coat, it is necessary to treat the nails and do a light manicure without soaking. In this case, it is necessary to remove the cuticle, trim the shape of the nails, carefully process the free edge of the nail. Not only the quality of the coating, but also its durability depends on how even it will be.

In addition, you need to consider that the perfect manicure implies the same length and shape of all nails. If oil or cream was used in the treatment of nails, they must be removed.

After that, the surface of the nail plate must be polished with a soft file for natural nails (bafa). This should be done delicately, removing only the gloss. If you press hard on the buff, you can damage the structure of the nail, removing not only its natural protective layer. Filed nails will look matte.

The next step is to use a degreaser (dehydrator). It will remove the residual sawdust after grinding and the remnants of cream or oil, if they were used at the very beginning. At this stage, it is important to pay special attention to the end of the nail, the inside of the free edge and the side ridges. If an untreated area remains, it can lead to a violation of the resistance of the coating.

Having completely removed the keratin layer, you need to use an acid-free primer. It is especially necessary in cases where the nails are thin and soft. This component of manicure helps to improve the adhesion of coatings to the surface of the nails, strengthening their structure.

After preparing the nails for coating, apply a base coat. It should be thin, evenly distributed over the entire surface of the nail plate. It is important not to forget about the end of the nail and the sides. The base coat has a sticky layer, which must not be touched: it makes the adhesion of the nail to the pigment maximum. When working, you need to try to do everything carefully so as not to violate the integrity of the coating.

A distinctive feature of the entire manicure using gel polish is the need to dry each applied gel-based layer. Imperfections must be removed before polymerization in a UV or LED lamp. A thick layer can quickly crack, which will affect the quality and durability of subsequent steps.

Buying a special lamp can confuse unenlightened shoppers. However, this is an important tool for manicure, because it is thanks to it that gel polish, base and top harden.

You can purchase a budget version of a compact size lamp. It is not necessary to buy a powerful device for drying two hands at the same time: at home, a neat device purchased at an affordable price is quite enough.

After the base coat, a colored gel polish is applied. It usually has good dense pigmentation, so one or two thin layers will be enough for an even background without stripes and unpainted areas. After applying each layer, they are polymerized in a lamp. Drying time depends on the type of lamp.

The LED device is more powerful and reduces the overall time for creating a manicure. Drying of one thin layer in such a lamp is 10-30 seconds. However, manufacturers often produce nail products that are not designed to work with it. In this case, it is better to buy an ultraviolet lamp, it is a universal device for all types of coatings. The polymerization time of one thin layer in it is 2 minutes.

Sliders are glued to the prepared surface. Their design can be the most diverse, it depends on the imagination and style of the intended composition. The method of applying stickers differs from their varieties. This process is very exciting and creative. By gluing pictures, they can be decorated with small rhinestones and microbeads.

After the slider design, you can apply the finishing layer. The top is a fixer, it is applied in a denser layer, and therefore it dries a little longer. The polymerization time in the LED lamp of the top coat is 1 minute, in the ultraviolet - 3-4 minutes.

It is worth noting that UV lamps differ in power. When buying such a device for home use, it is better to choose a model with a power of 36 watts. This is the optimal value so as not to harm the manicure and not disturb the water balance of the skin.

In addition to observing all the above rules, experienced craftsmen working in the nail field recommend choosing the main shade for stickers. thoroughly.

• If white is chosen, it is desirable that it be pure, without impurities. It is better to glue bright and attractive stickers on such a background. Such a base is ideal for any slider design, as it can make drawings richer.
• One of the actual shades of gel polish for pictures are flesh and beige-pink tones. Thanks to light shades, the picture will not lose its expressiveness and will be clear.

• When choosing a contrasting background for drawings, it is important to consider the color combination. The shade of gel polish should be a harmonious basis for the pattern.
• Before starting work, you need to prepare the necessary tools so as not to be distracted by searching for them during the manicure.

• When designing with water stickers, it is better to use warm water: this way the film will move away from the substrate faster.
• If the picture lay in the wrong place, as it was intended, do not try to move it. In this case, there are two ways out: redo it all over again or try to fix the defect with the help of other decor elements (rhinestone, sequin).
• A fully finished manicure should be protected from contact with water for at least half an hour after drying the finish layer.
• In order for the slider to be a durable and high-quality nail decoration, you need to pay special attention to sealing the free edge of the nail. You must not forget about it with each layer of coating, otherwise the stickers will begin to peel off after a few days.

Problems at work

Sometimes performing all the steps step by step, it is not possible to achieve an impeccable result. The reasons for this usually lie in the following:

• If the sticker falls off along with the topcoat layer, then the reason lies in the fact that the top coat or varnish layer has not dried well.
• The formation of wrinkles on the surface of the picture indicates that the quality of the sticker is low or its film is thick. However, the reason may be that the slider is too wet.

• Chips in the top coat may indicate that it lacked the minimum clearance on the side bolsters.
• Flaking of the coating may be caused by insufficient sealing of the butt of the nail. This is a mandatory step of the manicure, which is needed to form a kind of pocket that holds the sticker.

Beautiful and well-groomed nails distinguish a beautiful and well-groomed girl. With the help of the original design, it is easy to stand out from the crowd and show your uniqueness. At present, a huge number of products are presented on the industry market, with the help of which women's fingers will always be in the spotlight. One such popular option is sliders. Let's take a closer look at their features, as well as how to glue stickers on nails correctly.

What it is

How to apply nail stickers:

1. Coat your nails with colored gel polish.
2. Dry well and remove the sticky layer with a lint-free cloth soaked in clinser.
3. Separate the sticker from the base and carefully stick it on the nail.
4. Smooth out wrinkles with a bamboo stick.
5. Cover the design with a finishing top.

3D

These three-dimensional stickers are not flat, but slightly convex. Such sliders can become an original decoration for the entire manicure or highlight only one nail. Embossed 3D stickers are both water-based and adhesive-based. They are quite easy to work with, and in the sock they are not very whimsical. If you fix them correctly and well, then it should not arise with them. They will not cling to clothing or the body.

They are attached in the same way as the previous options. Only such stickers do not need to be smoothed. One of the disadvantages of such voluminous stickers is the difficulty of removing them. You need a special nail polish remover, tweezers or a scraper.

Application methods

But it is not enough to know how to glue stickers on nails correctly. It is important to remember about several ways to apply them. Let's take a closer look at each of them to make your nail design even more perfect.

On uncured varnish

The most reliable way to design a slider is the method when prints are transferred to an uncured layer of varnish. Many nail artists use a special brush to smooth the sticker. Thanks to it, many problems can be avoided: the drawing will lie flat and not tear. The brush tightly fixes the slider without forming unnecessary bubbles, bumps or waves.

This method has a noticeable resistance, because the coating dries along with the slider. Therefore, the bond will be quite strong. Just one finishing top is enough to secure.

on the sticky layer

The most convenient and easy way that many girls adore and put into practice. Stickers are attached to the top layer. The slider must be straightened with a brush or bamboo stick, and then re-secured with another layer of top. Make sure that the size of the sticker does not go beyond the side rollers.

For a finished manicure

A similar method is a real savior for a finished manicure that needs to be updated. If your nails are painted with gel polish, but you suddenly want a change, then this option is for you. You do not need to remove the old coating, you only need to renew it. Sliders need to be fixed on an acid-free primer (ultrabond). This tool does a great job and fixes the stickers on the nails. And you can fix such a design with the same top.

Now you know how to apply nail stickers. The procedure is quite simple, does not require special costs and does not take much time. But after a few minutes, an unusual print will flaunt on your nails, which will attract the attention of everyone around you.

Stickers on glass or car body must be applied according to the technology. There are two such methods - "dry" and "wet". The first one is better to use for small stickers, and the second - for canvases with a large area. As for the question of how to remove stickers from a car, special tools and compounds are used for this - a building hair dryer, gasoline and other means. Which ones - you will find out further by reading the article to the end.

How to stick a sticker on a car

Depending on the material of the sticker, its size, and the place where you plan to stick it, the methods of this process may vary. There are so-called "dry" and "wet" pasting methods. Let's start with the last one. If you plan to glue a large area vinyl film, then for this you will need the following materials:

• directly sticker;
• detergents for the surface of the car (car shampoos or similar compounds);
• soap solution;
• stationery knife or scalpel;
• plastic spatula;
• needle;
• (it is best to use alcohol or vodka, it is better not to use solvents, as they can damage the car's paintwork);
• building or household hair dryer (preferably building).

Using soapy water and a hair dryer

It is worth paying attention to the environment in which the work is carried out. The temperature in the room must be at least +10°С, the air must be dust-free and there must be no drafts. The next operation takes place in several stages. The first of them involves surface preparation, the second - fitting, the third - application, the fourth is the gluing itself and the elimination of defects. All work is performed according to the following algorithm:

1. The surface to be pasted must be thoroughly washed, remove grains of dirt, grains of sand and other debris. Any, even the smallest particle that has fallen under the sticker will be visible, which will spoil the appearance of the surface.
2. Try on the sticker to the surface. If her canvas is large, then it makes sense to glue it in parts. In this case, decide into which parts you need to divide it. In this case, it is necessary to proceed from the considerations that it is necessary to glue flat surfaces first of all, and then convex ones. After that, the joints between them should be processed.
3. Separate the paper base from the sticker.
4. Apply a soap solution to the adhesive surface of the sticker, as well as to the surface of the car where you plan to stick it.
5. Gently apply the sticker to the surface. Soap solution will help you align it in case you didn’t manage to glue it evenly the first time.
6. Using a rubber spatula, gently smooth it out, starting from the center and out to the edges.
7. Remove the top protective film from the surface without damaging the auto-sticker and without peeling off the adhesive layer from the main surface.
8. If an air bubble has formed under the sticker, it is necessary to carefully pierce it with a needle so that the air comes out.
9. If the film is pasted at the joints of the doors, then it must be cut with a clerical knife.
10. The final stage consists in heating the surface with a building hair dryer to a temperature of +60...70°C. This is necessary so that the sticker becomes soft, and it is easy to bend it at the joints.

Don't overdo the temperature. Otherwise, the sticker may simply melt.

The first few days (up to about 10) after gluing don't want to wash the car. It takes some time for the glue to dry completely.

• directly the sticker that is planned to be pasted;
• glass cleaner and rags;
• mounting tape;
• ruler or tape measure;
• scissors;
• rubber spatula, plastic card or other object with a flat edge (optional).

Work is carried out according to the following algorithm:

“Dry” gluing method

1. First of all, you need to thoroughly wash the glass surface where you plan to place the sticker, remove particles of debris and sand.
2. Next, place the sticker in the planned place and secure it to the upper corners with mounting tape.
3. Using a ruler or tape measure, align the sticker, check the symmetry. If necessary, move the sticker and reattach with tape at the corners.
4. Attach a strip of mounting tape in the middle of the sticker vertically. Remove the tape from the top left corner of the sticker.
5. Lift the left half of the sticker and separate the backing from it (up to the mounting tape). When doing this, make sure that the mounting tape is aligned with the pattern.
6. Cut off the separated piece of backing and set aside.
7. Using a spatula or card, begin to carefully stick the sticker, moving from the center to the edges. Make sure that no air bubbles form.
8. When half of the sticker is pasted, remove the mounting tape from the middle and right corner of the sticker.
9. Remove the remaining backing. When doing this, make sure that the mounting tape is aligned with the pattern.
10. Glue the right side of the sticker in the same way. Act carefully and carefully. Make sure there are no air bubbles.
11. When the entire sticker is installed, remove the mounting film from it. It's best to do it at an angle.

Stickers on the side of the car are installed in the same way. The main thing is to always act carefully and not rush. However, car owners often wonder not only about applying, but also about removing the sticker from the surface of the car, as well as the adhesive residue from it.

How to remove a sticker from a car

Using a hair dryer to remove the sticker

We will analyze in detail how to remove the sticker from the glass of the car or its body. First of all, you need to know that there are different types of stickers, but vinyl ones are the most popular among motorists.

You need to start the story with the features of vinyl stickers. The fact is that they are produced on the basis of vinyl (a chemical compound that is resistant to moisture, temperature extremes, and so on), which has excellent performance properties, durability, strength, and resistance to external influences. Stickers are produced disposable, and their glue is designed for operation within 2-3 years. After that, it polymerizes, and the sticker itself shrinks. In addition, its surface is often covered with cracks, and when you try to tear it off, it breaks off into small pieces.

Another common type of stickers is paper-based. They are cheaper, but not resistant to moisture and temperature extremes. However, they are often used for gluing on the inside of glass.

If your car has a dark tint and the sticker has been on it for a long time, then it is likely that after removal, the tint in its place will be darker than on the rest of the surface.

A popular way to remove a sticker from a car body is to heating it with a hair dryer. At high temperatures, the material becomes soft, and if it is not very cracked, then there is a good chance that it can be removed in one piece. The metal must be heated evenly. As it cools, it is necessary to periodically maintain the temperature. Remember that the higher the temperature of the metal, the less likely it is that adhesive residue will remain on the surface. However, do not overdo it with this, otherwise you may damage the car's paintwork.

How to remove adhesive residue from the surface of the car and glass

Adhesive residues can be removed by first moistening them with alcohol or alcoholic mixtures. Be careful when using different solvents. Read the ingredients beforehand to make sure they won't damage your car's paintwork. In particular, in this case do not use solvents based on acetone, both directly and by acetone itself.

You can also remove after vinyl stickers on a car using:

Comparison of various adhesive removers and adhesives

• gasoline;
• kerosene;
• removal fluids;
• silicone solution to remove glue from the body;
• paint degreaser.

After using the listed liquids, do not forget to use foam (soap solution) to wash off their remnants. Also, some car owners in such cases remove the remnants of glue with very fine sandpaper (“zero”). However, after that, the problem area will need to be polished with a polishing paste. In stores, you can find a special rubber roller that is put on a drill. It can also be used to effectively remove pre-softened glue.

Results

Sticker film on the car is not particularly difficult. This is especially true for small labels. Almost any car owner can handle this. Another thing is if you want to use vinyl stickers on the car all over the body (for example, “carbon look”). In this case, it is better to seek help from the masters.