How to knit footprints easy for beginners. How to knit footprints on two knitting needles: various ways with a description

Being at home, I want to feel comfortable and cozy, but not all slippers give such a feeling. And here hand-tied footprints come to the rescue. From the outside, it only seems that it is difficult to knit beautiful, soft, comfortable and warm footprints with knitting needles. In fact, as in many other cases, this is an apparent appearance. Despite the fact that knitting socks on four knitting needles is a classic, as a rule, when knitting tracks (for example, popular seashells), you can get by with just two. Only some patterns, for example, wide braids, fit in three. When you have step-by-step instructions and a diagram with a description of knitting in your hands, it immediately becomes clear to each needlewoman that everything is not so difficult.

From the outside, it only seems that it is difficult to knit beautiful, soft, comfortable and warm knitting needles

For work, you will need knitting needles of the third size, natural wool yarn, threads - 2 100-gram balls.

First of all, thirteen loops and eight rows of garter stitch are made with knitting needles.
After the ninth row, you need to add according to this scheme: hem + five garter stitches + yarn + front + yarn + 5 garter and, finally, hem. The wrong side is knitted according to the final result. Purl yarns - crossed.
The next front rows need to be supplemented with crochets before and after garter stitch. Make the wrong side according to the picture. Nakida - crossed wrong side. So continue until there are 39 loops.
Of all, nine loops must be selected and rounded to the toe: knit fifteen, the ninth and tenth together. Next, turn the canvas. Knit the eighth, and the ninth and tenth as the previous ones. And so on until the moment when there are only nine central ones.
On the edge of the toe, make hem lines on both sides of 18. At this stage, there should be 45 loops. Distribute: edge. 5 garter, 1 purl, 4 plaits, 21 facial. Then 1 purl, 4 harnesses, purl, five garter, edge loop.
In harnesses, you need to shift the pattern in every fourth row. Leave two on an additional knitting needle, two facial ones. After that, two backup pick up. The wrong side - according to the drawing. Make 37-40 rows (37 foot size).
The heel is done in the same way as the toe.
The final eight rows are garter stitch. The final row is knitted, closing all the loops.

Beautiful beads lined with a pattern can serve as decoration. For slippers, it will be very nice to make patterns in the form of bows or flowers. Below is a video tutorial, thanks to which you can learn how to quickly and beautifully knit footprints for a woman in an unusual way on 2 knitting needles for free. Even a beginner knitter can do it literally in an evening.

Simple tracks on two knitting needles (video)

How to knit footprints on two knitting needles without a seam: knitting pattern and description

The first step is to measure your leg. This will affect the size of the loops. Their number must be odd. (Depending on whether it is an adult or a child, there may be 16 or 42)

The first step is to measure your leg.

If you plan to knit on the leg of an adult, then this number will be in the range of 40 - 60. First, the top is knitted, then the sides.
To make the top of the slippers, you need to use any kind of tight knit. Alternatively, you can knit an elastic band 1 by 1. In this case, the footprints will not jump off your feet.
You need to understand whether the tracker will have a lapel or you can do without it. Here, as they say, everyone's business. If it is decided what will happen, then the number of rows will be 20. Otherwise - 10.
The next step is to split the side in half. In the middle, add one loop and continue knitting with a garter stitch to the top of the toe. To do this, knit the first half. Then yarn over and a middle loop. And again nakid. Knit the second part.
Thus, the canvas is knitted to the depth that was originally intended.
After that, the sole for the footprint is made. It also knits in garter stitch. This method will give the desired density, and the track will not be hard, which is important.

the canvas must be divided into three parts;
the middle part should be equal to 11 loops;
we knit the rows like this: first - to the middle, 10 loops are knitted, the 11th is knitted together with the other part.

How to act correctly:

expand knitting, make 11 loops in a new way, as shown before;
knit until the amount that is needed for the sole remains;
then the back part is made, for which the loops that remain are used - they need to be knitted with one loop of the side (first from one, then from the other side).

According to this scheme, it is easy to knit women's tracks and Czechs for children using two knitting needles.

Knitting needles: an easy way (master class for beginners)

How can the lightest tracks be knitted from the remaining woolen yarn? Almost all needlewomen have such remnants: it’s a pity to throw it away, and it’s not clear where to apply it. The quickest way to dispose of these leftovers is to knit footprints or a pair of socks.

To make socks from these remnants, knitting needles of the fourth and fifth numbers will be needed. You can knit on separate 2 knitting needles, and on circular ones. You need to start needlework in order to dial 50 loops. This is followed by knitting twenty stitches in garter stitch. The height of the model is determined by the binder. In the variant shown here, an additional 5 rows of garter stitch were added with light threads. The process ends with the simultaneous closing of all loops.

As a result, a bound canvas should come out in the shape of a rectangle. Its length will be 37 centimeters, height - 12 centimeters. Crocheted openwork patterns will decorate the upper row with an auxiliary decor. To do this, you need to knit columns. They should consist of five crochets through three loops.

The next step will be the manufacture of a rectangular blank. It needs to be bent at an angle at the nose and make a sole. Then the sole of the rest of the track is made. Under the columns, two parts of the slipper are sewn at the top.

Men's slippers with knitting needles

The advantage of footprints without seams is not worth describing for a long time: nothing interferes, does not press or rub. Knitting them is easy and short. If you want something more complex, you can knit the footprints with a Norwegian pattern. The example below shows how to knit men's footprints. You need to take care that the legs of your beloved men are always warm.

For knitting you will need:

a skein of yarn of a man's favorite color;
a pair of knitting needles of the third number.

The advantage of footprints without seams is not worth describing for a long time: nothing interferes, does not press or rub

The scheme is not required - everything is extremely simple.

Cast on 49 stitches first.
Knit three rows with an elastic band (face - wrong side).
Then knit 23 loops with an elastic band + yarn over + knit one + yarn over + knit (mark with a marker, as it will be central) + yarn over + knit one + yarn over + knit 23 loops with an elastic band.
Next, make 20 rows. In the wrong side, knit all the loops, as indicated in the figure.
After that, we knit 5 rows of garter stitch. Knit the next row to half. Continue knitting the middle seven loops in garter stitch, knitting 2 double loops at the end of the rows from the face and inside out.
Do this until there are only 7 loops in the center.
To form the heel from the sides of the gum cast on 14 loops. Knit, knitting 2 loops together in all rows.

At the end of knitting, close all loops.

How to make original shoes

Below is a master class for foot size 36-41. You need to take a thick yarn for the winter season and a thinner yarn for warmer weather.

Cast on 41 sts first.
Work three rows in garter stitch. Got a sideboard.
Divide the needlework into two parts.
Mark the odd loop with a marker. Then yarn over + loop + yarn over.
At the end of the row, with each knitting needle, make 5 loops. As for the eleventh loop, it should be connected with the side row.
At the end of knitting, turn the fabric over. Then continue with the wrong loops until it reaches the loops of the sole.

You need to take a thick yarn for the winter season and a thinner yarn for warmer weather

With the final touch, tie together several loops of the side rows. This will form the back. That's the whole trick.

Before you start needlework, carefully study and select the one you need.
The yarn must be prepared dense. It is not necessary to take a hard one - when wearing the product, discomfort will be felt.
It is recommended to knit the product with a relief pattern - it will warm and massage the leg.
So that the edge does not stretch, it is necessary to crochet it (column one row without a crochet).

The sole is best knitted with a double thread.

Slippers-tracks on two knitting needles (video)

What are footprints? This is something between slippers and cropped socks. Nylon footprints can be worn under ballet flats and open shoes if your feet are cold or for some reason your shoes are rubbing. But today we will talk about knitted footprints. Many people love footprints because they are easy to put on, unlike socks, they are easy to wash, unlike slippers, and at the same time your feet are always warm.

Even as a child, my grandmother knitted half-woolen footprints for me, until now, in the cold season, I prefer to wear footprints at home, rather than slippers. I think that most of our readers knit better than knitting, so we decided to compile a selection of crochet tracks.

What yarn to choose for knitting footprints?

Previously, the footprints were knitted from the remnants of yarn, from old loose things, because. there was not such a large selection of threads on sale. Now the needlewomen expanse. Did you know that there is a special sock yarn? It can be monophonic or sectional dyeing, also with different inclusions. This yarn is very soft, although it contains about half of the wool, it does not prick and does not rub for a very long time. It is checked up on own experience. Sock yarn has one drawback - the high price. What to do if imported sock yarn is not affordable for you?

Do I need to crochet soles for footprints?

If you can't afford to buy special sock yarn that is resistant to abrasion, we suggest making soles for footprints:

the sole can be knitted from a denser and more durable yarn and sewn with a second layer on top
you can add kapron thread to the yarn
the sole can be made from the remnants of the skin
you can buy ready-made in the store.

The main thing to remember is that the sole of the crochet tracks should not be slippery.

Crochet tracks, models from the Internet

Pink crochet footprints, MK from Golubka

Yarn Rio from Kamteks, hook No. 3.25.

And this is the scheme of the sole for pink footprints:

Crochet footprints with a bow

We will need:

sole yarn. This time I took a hank of those that are sold for 15-20 rubles. on the market, I will knit in 2 threads;
yarn for the main part. For this pair, I took a wool mixture from Kamteks "Romance" 120 m per 100 g (I want to advise, take a thread thicker than mine);
hooks No. 3 and No. 4;
satin ribbon 3-5 cm wide for bows and 1 cm wide in order to pull these bows;
insoles of the right size;
tailor's pins with a plastic tip;
sewing threads and needles.

Size 23-24 cm or 37-38. Leaves about 70-80 gr. yarn.

Crochet footprints with floral motif

These crochet slippers start with a floral motif that is placed at the top, in the most visible place.

First you need to make the so-called amigurumi ring. That is, wind the thread around your finger several times, and knit the first row of the pattern into this ring. Then, pulling the end of the thread, pull the ring off so that there is no central hole.

Knitting begins with a beautiful floral motif: make an amigurumi ring, as described above.

1st row: ch 4, 1 tbsp. with 2n in the ring, ch 3, * 2 tbsp. with 2n in the ring, ch 3, repeat from * 6 times.

2nd row: ch 1, 1 tbsp. b / n in the arch pr.r., 5 v.p., * 1 tbsp. b / n in the arch, pr., ch 5, repeat from * to the end of the row.

3rd row: ch 1, * 1 tbsp. b / n in the arch pr.r., 1 v.p., 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, 1 vp, 1 tbsp. with 2n, ch 1, repeat from * to the end of the row.

Tie the central motif with the same thread and change the color.

Tie a square around the perimeter with a new thread and make a chain of 75 ch. from one corner to the next (4th row).

In the fifth row, the square and the chain must be tied with single crochets according to the scheme.

Blue - blue crochet footprints

Size: 36-37.
You will need:

remnants of thick yarn of the same thickness of blue, gray and light blue,
hook number 4,
insoles.

Description of crochet footprints:

Tie 20 air with blue yarn. p. and knit around them 6 rows of art. b / n, adding 3 loops at the turns in each row. Next, knit the top. On these loops, continue to knit a trace with blue yarn, as follows: 7th row 3 untied st. s / n, connected together, 1 air. n. (knit the next column through 1 loop).

Knit the 8th row with gray yarn, like the 7th row, but knit the column between the columns of the previous row.

Knit the 9th row with blue yarn, like the 7th row, but do not knit an air loop between the columns.

Tie the second slipper in the same way. Sew the insoles to the soles.

Blue crochet footprints

At home, we should feel comfortable and cozy. And in this we are helped by little things dear to the heart. Knitted slippers wrap our feet in warmth, like fluffy kittens. And they were created by designer Dora Ohrenstein and called "Lucy's Slippers".
Size: Description is given for small, medium and large sizes, which correspond to the dimensions: 10 cm wide X 20 cm long (4 cm wide X 23 cm long; 11 cm wide X 25 cm long).

Multi-colored crochet footprints

Crochet footprints from Trinity yarn "Derevenka"

Size 37-38.
Yarn - "Derevenka" from Troitsk, natural color (1508), 100% wool, 170 m / 100 g.,
Yarn consumption 100 g.
Hook number 3.5.
The knitting density of the main knitting (single crochet) Pg \u003d 1.54 loops in 1 cm, Pv \u003d 1.8 rows in 1 cm.
Leg circumference (He) 23 cm.

Sneakers - sneakers for adults

Crochet footprints with flowers

According to the same pattern, children's crochet tracks are crocheted (author):

Several models of crochet footprints, connected according to one description

Finished Size: Instructions are for an 8" [approx. 20.5 cm] foot - size 1.
Figures in parentheses () are for 9" and 10" feet - sizes 2 and 3.
Materials: the main yarn is dark green, a small amount of yarn is light green and amber (golden) in color: a needle for sewing knitwear; hook size 3.75 (or 4 mm) and 5.00 mm.

Slippers - crochet shoes "Three flowers"

Master class from Efremova Evgenia.

For work we need:

100 g of red yarn Romans produced by KAMTEX (50% wool, 50% acrylic, 120m/100g);
100 g of gray yarn Romans produced by KAMTEX (50% wool, 50% acrylic, 120m/100g);
a skein of jute produced by KAMTEX to increase the wear resistance of the sole and foot massage;
hook number 4, hook number 2.5;
gray and red sewing threads for sewing flowers;
scissors;
4 hours time;
good mood.

Crochet tracks, models from our website

Hook number 3.2, slippers about 38 sizes.

How to knit house slippers. The master class is offered by HELENOCHKA (Elena from the city of Ivanovo). Slippers for yourself.

We will need: threads of two colors, a hook, a small piece of fabric and two perforated insoles.

Tools:

hook number 3
threads of medium thickness black
lightning metallic black 70cm.

Sizes: 35/37 - 38/40 - 42/44 (EU sizes).
Foot length: 22 - 25 - 28 cm.
You will need: DROPS ESKIMO yarn (100% wool, 50 m = 50 g) 100 g for all sizes red; 50 g for all sizes milky white; 50 g for all sizes beige; remnants of black for the eyes. Hook 8 mm or size suitable for obtaining the desired density of knitting 11 sc = 10 cm wide.

Crochet video tutorials

How to crochet high heel shoes for adults

Thanks to the protruding heel on the footprints, you will be comfortable wearing them. See how to do it.

Openwork crochet footprints

Crochet for beginners. Yarn Lanagold 100g / 240m, hook No. 3.5.

The video should load here, please wait or refresh the page.

Crochet footprints with an interesting pattern

For knitting you will need:

sewing needle
hook number 3
yarn of two colors (main and a little contrasting for the pattern)

The video should load here, please wait or refresh the page.

With the onset of cold weather, it is so nice to wake up and put on warm and cozy knitted ones. For knitting slippers in this collection, we will use knitting needles and ours will look more like.

Why are slippers better than knitted socks? Firstly, they can be knitted faster, secondly, it will take you much less yarn, and thirdly, this option looks much more feminine. The main thing is to choose a delicate yarn, colors that are pleasant for you. And these slippers will become your favorite. And most importantly, you can knit none of these slippers, but for every home suit or bathrobe.

In this collection, I tried to pick up the most beautiful () knitting needles. All slippers are given with a detailed description and knitting patterns.

Practical and at the same time elegant knitted slippers with embroidery.

Size: 36-38

To knit slippers you will need: thick yarn (50% wool, 50% acrylic) 100 gr. dark blue, remnants of gray-blue, blue for embroidery, knitting needles No. 4, hook No. 5.

Pink knitting slippers

Size: 35/37 — 38/40 — 42/44

Foot length: 22 - 24 - 27 cm

Needles number 6 - or the size required to obtain 13 loops x 17 rows = 10 x 10 cm.

Garter Stitch (straight and reverse rows): all rows are knit.

Instructions for adding loops: add 1 loop on the front side, making a crochet. In the reverse row, knit the yarn over the back wall so that there are no holes.

Slippers: knit in straight and reverse rows from toe to heel.

Cast on 12-13-14 sts on needle size 6 (leaving the end of the thread about 30 cm for sewing). Mark 4th and 9-10-11 sts with a marker. K st, at the same time inc 1 st on each side of both markers, and repeat inc on every other row 4 times in total = 28-29-30 sts.

When piece measures 9-10-11 cm, work next row as follows: 7 sts in garter st, 14-15-16 sts, 7 sts in garter st. Continue in the same way until a height of 22-24-27 cm, close.

Assembly: sew and pull off the toe of the slipper with a thread

Tracks with leaves very soft and warm.

Knitted footprints with knitting needles. A very simple model even for beginner needlewomen.

Size: 35/37 – 38/40 – 41/43.

Leg length approx. 22 – 24 – 27 cm

Knitting density: 26 p x 34 p = 10 x 10 cm

You will need: 50g Drops delight by Garnstudio for all sizes; double pointed or circular needles 2.5 mm (40 cm)

Additions: inc 1 st in each section of stockinette stitch, working 1 yarn over on the right side of each purl. loops. Following. in a circle, knit a crochet with a crossed front (i.e. behind the back wall). The next addition is done on the left side of each out. loops.

Description of work. The item is knitted in the round. Cast on 72-81-90 sts on circular needle size 2.5mm. 3 circles - out. and 1 circle - persons. Continue with an elastic band 2 persons x 1 out. When piece measures 3 cm inc 1 st in each section of stockinette stitch = 96-108-120 sts. Continue with K3. x 1 out. When piece measures 6 cm inc 1 st in each section of stockinette stitch = 120-135-150 sts. Continue for 4 knits. x 1 out until the length of the part reaches 9-91/2-10 cm. Loosely cast off according to the pattern (how the loops look). Similarly, knit the second piece.

Assembly: Fold the product in half and sew.

Another very simple model of footprints, which is knitted on two knitting needles shawl pattern in short rows.

Size: 35/37-38/40-41/43

Foot length: 22-24-27 cm.
Materials: yarn DROPS ESKIMO (100% wool, 50 g / 50 m) - 100-100-150 g, knitting needles 6.0 mm.

Knitting footprints on two knitting needles: the work is done in a garter pattern back and forth on ordinary knitting needles.
Handkerchief pattern: all rows knit facial loops.
Cast on 28-31-35 sts on needle size 6 mm, mark sts after 22-24-26 sts from RS (6-7-9 sts left for toes).
We knit back and forth with a garter pattern, but every 4th row knit short - turn the work immediately after the mark.
Please note that when turning the work, we tighten the thread tightly to avoid holes.
We continue in this way to a height of 8-9-10 cm (we measure the larger side).
On next row from RS, bind off first 14-16-17 sts = 14-15-18 sts.
We continue to knit as before for another 2-2-3 cm (we measure the larger side).
On next row from WS cast on 14-16-17 sts at end of row = 28-31-35 sts.
We continue to knit as indicated until a height of 8-9-10 cm (measure the large side).
Close loose loops.
We stretch the thread through the extreme loops of the toes, pull off the thread and fasten from the wrong side, sew the seam under the foot and along the heel.

The second track is knitted in the same way.

Stunning not only warm, but also fun.

SIZE: 38/39

FOR KNITTING SOCKS YOU WILL NEED: 100 g white Rgia Silk (55% wool, 20% silk, 25% polyamide, 200 m/50 g). Remains of Regia Silk yarn (4 strands) in green, pink and apricot. Set of stocking knitting needles No. 3.5–4.5. Hook No. 3.5–4

garter stitch: persons. and out. R. - persons. P.

FACE SURFACE: persons. R. - persons. p., out. R. - out. p., in circular rows, knit faces.

KNITTING DENSITY, persons. surface: 20 p. and 28 circular p. = 10 x 10 cm.

POM-POMS: cut out two identical circles with a hole from cardboard, put them together. Take the thread folded in half, thread it through the darning needle and wrap the thread around the cardboard rings until the inner circle is filled. Cut the threads along the outer circle. Stretch a double thread between both circles and tie all the threads in the middle with it. Remove the cardboard circles and trim the pompom with scissors.

Attention! Knit socks with a thread in 2 additions.

DESCRIPTION OF WORK: cast on 44 sts and knit in straight and reverse rows of 12 cm in garter stitch. Transfer the loops to 4 stocking knitting needles and distribute them (11 sts on each knitting needle). Continue knitting in circular rows. satin stitch. At a total height of 20 cm, perform a toe according to the general rules for knitting socks. Fold the edge in half and sew. Crochet the top edge of the socks with 1 circular p. Art. b / n, finish 1 connection. Art. Then knit 1 circular p. from the arches as follows: 1 tbsp. b / n, * 3 tbsp. s / n in the next 2nd p., 1 tbsp. b / n in the next 2nd p., repeat from *. Make pompoms (3 cm in diameter) in three colors and sew them to the middle of the upper part.

Advice: instead of small pom-poms, you can make one large colorful pom-pom. To do this, you can use multi-colored threads at the same time or wrap paper rings in separate colored sections.

Delicate slippers are knitted from soft yarn . In such slippers it is very pleasant to meet a frosty morning.

Description of knitting slippers

Dimensions: 36/37 (38/39)

For knitting you will need: 50 g lilac, 50 g each or the remains of pink and yellow Leggero yarn (100% microfiber, 160 m / 50 g); knitting needles No. 4; hook number 3.

Garter stitch: persons. and out. R. -persons. P.

Flower A: tie 1 air. p. and knit as follows: 3 air. p. (= 1st st. s / n), * 1 picot (= 3 air. p., 1 conn. st. in the 1st air. p.), 1 tbsp. s / n in typesetting air. n., repeat from * 3 times, finish with 1 picot and 1 connection. Art. in the 3rd air. n. start.

Flower B: tie a chain of 6 air. n. and conclude it 1 connection. Art. in a circle. Then knit as follows: 1 air. n. (= 1st st. b / n), * 2 st. b / n, 1 semist., 1 tbsp. s / n, 1 half. and 1 tbsp. b / n in a circle, repeat from * 3 times, finish 2 tbsp. b / n, 1 semist., 1 tbsp. s / n, 1 half. and 1 conn. Art. in the air n. start.

Knitting density, garter stitch: 16 p. and 33 p. = 10×10 cm.

Description of work: 1 slipper consists of a sole and an upper part. For the sole, dial 8 sts with a lilac thread and knit with a garter stitch, while for rounding, add on both sides in each 2nd p. 2 x and in every 4th p. 3 x 1 p. = 18 p.; knit straight. On a total length of 19.5 (21) cm, subtract 1 p. for rounding on both sides, in each 4th p. 3 x and in the next 2nd p. 1 x 1 p. On a total length of 24.5 (26) cm, close the remaining 8 p. For the upper part, dial 8 p. with a lilac thread and knit with a garter stitch, while for rounding, add on both sides in each 2nd p. 2 x and in every 4th p. 3 x 1 p. \u003d 18 p. On a total length of 8.5 (9.5) cm, close the middle 4 p. And first knit the left half, set aside the rest of the p. To round off, close from the inner edge in the next 2nd p. 1 x and in the next 4th p. 1 x 1 p. = 5 p.; knit straight. On a total length of 18 (19.5) cm, add 1 p. from the inner edge, in each 2nd p. 3 x and in the next 4th p. 1 x 1 p. \u003d 10 p. On a total length of 27.5 (29) cm, set aside the loops. Symmetrically tie the right half.
Assembly: sew the reserved loops of the upper halves with a knitted seam, then sew the upper part to the sole so that the seam is inside. Tie the upper edge with a lilac thread for 1 circle. R. Art. b / n and “crustacean step” (= st. b / n from left to right). For straps, cast on 17 sts with a lilac thread and knit with a garter stitch, while after 1 cm make 1 hole for a button (= knit the 3rd and 4th sts together on the right side, 1 yarn over); close the loops at a total height of 2 cm. Sew along the strap to the inner edge of the slipper. For each slipper, tie 6 yellow flowers A and 6 pink flowers B. Sew the flowers evenly onto the slippers, while using 1 pink flower as a button

Slippers with a button.

Description.

Dial 5 loops and knit with a garter stitch, making additions at the beginning and end of the row (through the row). From two you need to add 10 loops, you should get 25 loops on the needles. Then we knit as follows: remove 1 loop without knitting, 1 person., * from one loop, knit 2 out., from one loop, knit 2 persons. *, finish the row of 1 persons., 1 out.
1 remove without knitting, we knit all the following loops according to the figure: 2 faces, 2 out. etc.

It is necessary to knit about 30 rows with an elastic band, then we knit two loops together where we added them, facial-facial, purl-purl. Now we switch to garter stitch, decreasing at the end and beginning of the row (through the row) until 5 loops remain on the needles. It remains to tie the strap of the required length, do not forget to make a hole for the button, knit 2 together and double crochet, this will be a loop. slippers ready

Warm and comfortable slippers from Drops.

Beautiful footprints knitted with Norwegian pattern will be a great gift for your family and friends.

Cozy slippers knitted. A simple pattern that even beginner knitters can do.

Comfortable slippers-socksknitting needles.

Description:

Cast on 7 stitches and knit 12 rows in garter stitch (all knit stitches or purl as you prefer)

13 row: K1, yarn over, knit 1, yarn over, purl 1, yarn over, knit 1, yarn over, purl 1, yarn over, knit 1, yarn over, knit 1.

14 row: 4 out., 1 persons., 3 out., 1 persons., 4 persons.

15 row: 2 knit., yarn over, 1 knit., yarn over, 1 knit. 1 out., 1 knit., yarn over, 1 knit., yarn over, 1 knit. 1 out., 1 knit., yarn over, 1 knit. , yarn over, 2 persons.

16 row: 6 out., 1 person., 5 out., 1 person., 6 out.

17 row: 3 knit., yarn over, 1 knit., yarn over, 2 knit. 1 out., 2 knit., yarn over, 1 knit., yarn over, 2 knit. 1 out., 2 knit., yarn over, 1 knit. , yarn over, 3 persons.

18 row: 8 out., 1 person., 7 out., 1 person., 8 out.

19 row: 4 knit., yarn over, 1 knit., yarn over, 3 knit. 1 out., 3 knit., yarn over, 1 knit., yarn over, 3 knit. 1 out., 3 knit., yarn over, 1 knit. , yarn over, 4 persons.

20 row: 10 out., 1 person., 9 out., 1 person., 10 out.

21 row: 5 knit., yarn over, 1 knit., yarn over, 4 knit. 1 out., 4 knit., yarn over, 1 knit., yarn over, 4 knit. 1 out., 4 knit., yarn over, 1 knit. , yarn over, 5 persons.

22nd row: 12 out., 1 persons., 11 out., 1 persons., 12 out.

23 row: 6 knit., yarn over, 1 knit., yarn over, 5 knit. 1 out., 5 knit., yarn over, 1 knit., yarn over, 5 knit. 1 out., 5 knit., yarn over, 1 knit. , yarn over, 6 persons.

24 row: 14 out., 1 persons., 13 out., 1 persons., 14 out.

26th row: purl 8, purl 2 together, turn knitting, in fact, we begin to knit the sole of the slipper like a heel at the toe. So we knit until we reduce all the loops. and 9 loops will remain on the knitting needles.

Now we string the loops on the sides of the slipper and knit with one piece to the beginning of the heel, it remains to tie the heel of the slipper, the middle 9 loops are in work, we start decreasing from both sides, as we knit the heel. The slippers are ready;

Knitted slippers with rice pattern

Size(s): 35/37 — 38/40 — 41/43
Foot length: 22 - 24 - 27 cm.

Yarn: DROPS ESKIMO by Garnstudio (100% wool; 50g ~ 50m)

Number of balls: 150 gr.

Tools): straight knitting needles 4 mm.

Knitting density: 15 p. x 19 p. = 10 x 10 cm.

Garter stitch in straight and reverse rows. Knit all stitches. 1 rib = 2 rows L.

Addition: Increase on both sides of the central two loops with the help of crochets. On the next row, knit yarn over twisted to avoid holes.

Description of knitting slippers

Knit in straight and reverse rows from top to bottom, starting from the middle of the back side.

Cast on 40-44-48 sts. Work 8 rows in garter st. Place a label in the middle. Continue in stockinette stitch, work edge stitches as before in garter stitch. At the same time, in the first row of the front surface, add 1 p. On both sides of the central two p. - See instructions for adding. Repeat inc on each row (i.e. with both RS and WS) a total of 13-14-16 times = 66-72-80 stitches. Work one row after the last inc. Now the length of the product is 11-11-12 cm. Continue with a garter stitch, while after the 6th row close 1 st at the beginning of the next four rows (i.e. close 2 sts on each side) = 62-68 -76 sts. After knitting a total of 10 rows in garter st, cast off all sts loosely.

Assembly

Fold the item in half. Sew a seam under the foot and a back seam.

Knit a second slipper.

Slippers footprints knitted

The tracks are knitted on two needles. They are very comfortable to wear and look beautiful on the foot. They are knitted from the remnants of yarn, but it is best to use yarn that contains more wool, because. they will be warm and follow the shape of your foot.

Cast on 30 stitches.
1p - 6p: person.p.
7r - 22r: knitted smooth surface (odd rows - knitted p., even rows - purl)
23 - 41r: knit the heel, for this knit 19 persons.p., and 20 and 21 pet. knit faces together, turn work. Knit 9 purl, and knit 10 and 11 sts together purl. Again, turn the work, knit 9 persons.p, 10 and 11 p. knit together persons., and so knit, alternating 24 and 25 p. until there are 10 sts left on the needle.
42r: dial 10 loops from the braids of the side of the heel, turn the work.
43r: Knit 20 knit sts and cast on 10 more sts from the other side of the heel. = 30 p.
44 - 74r: knit faces. satin stitch.
75r: start management: 7 persons., 3 persons together., 10 persons., 3 persons together., 7 persons.
76r: purl
77r: 6 persons., 3 persons together., 8 persons., 3 persons together., 6 persons.
78r: purl
79r: 5 persons., 3 persons together., 6 persons., 3 persons together., 5 persons.
80r: purl
81r: 4 persons., 3 persons together., 4 persons., 3 persons together., 4 persons.
82r: out. P.
83r: 3 persons., 3 persons together., 2 persons together., 3 persons together., 3 persons.
84r: 9 out and knit the 10th from the pigtail (in total, cast on 18 loops from the braids on each side).
85r: 4 persons., 3 persons together., 3 persons. and the 4th from the pigtail.
86r = 84r.
87r = 85r.
Repeat 84 and 85 r until all the loops of the braids are knitted.
Bind off remaining 9 sts.

There are more threads on this topic:

Also on our site there are very good collections of knitting for children:

Knitted blankets (11 models with description)

The article was prepared for the Dashkin Dom website. When copying a link to the site is required.

Chapter: ,

Knitted slippers, sleepers, night shoes ... All these are synonyms that fit the description of actually one accessory - knitting footprints: a diagram and a description on two knitting needles, beautiful models of footprints have already appeared on our website and are waiting for your caring hands.

Why are traces so attractive? Firstly - this comfortable, warm, beautiful accessory R. They are associated with home comfort, warm hospitality and a winter fairy tale outside the window. In addition, knitting tracks is a good practice for beginner knitters who want to improve their skills and try new knitting methods.

Footprints are not as big as a scarf or socks, they require little yarn. If you do needlework regularly, you will probably have a few skeins of "leftovers" that can be completely used for knitting footprints.

Footprints on two knitting needles - one of the simplest ways to knit footprints with your own hands. There are different track models., it all depends on the nature of the knitting and the design of the product itself.

Footprints with and without a pattern.
Footprints with accessories, ties, buttons, decorative elements.
One-piece seamless footprints.
Footprints with or without soles.
Traces of motives, details.
Footprints with one seam (passes along the back wall of the heel instep).

For knitting tracks, half-woolen or woolen yarn with the addition of synthetics is suitable, so the product will be denser. We take the knitting needles of the same thickness as the yarn. If the yarn is thin - knitting needles with a small diameter, if the yarn is thick, then the knitting needles are correspondingly thicker. For medium weight yarn, size 3 or 4 needles are usually used. Craftswomen often use a hook to process the edges, but this is not necessary.

The technology of knitting footprints involves the use of three different methods.

According to the first technology, we we start knitting a footprint from a sock by collecting the minimum number of loops.
According to the second technology start knitting from the heel, moving to the toe.
And the third technology consists in cross-knitting a large part, which is then sewn together.

Simple and beautiful tracks on 2 knitting needles: diagram and description

The first scheme that we will show you consists of two parts (the sole and the top of the footprints). The description contains all the nuances of working with knitting needles and with a hook, which will also be needed when creating this product.

And for knitting these footprints there is step-by-step instruction, with which you can explore all the details and details for free.

Tools and materials:

thick yarn;
thin yarn;
circular needles, size 4;
thread, sewing needle.

Step 1. We collect 87 loops on the knitting needles and knit 10 facial and purl rows with facial loops. At the end of each row we add a loop to get 97 working loops.
Step 2 We take a thin yarn and knit a row of facial ones. And then knit with a “teeth” pattern.

Step 3. We fold knitting with a pattern in half and insert the knitting needle into the lower loops, we collect the teeth.

Step 4 We introduce the yarn of the main color.

Step 5. We knit 8 rows with an elastic band 1x1.

Step 6 Then knit 30 loops from the edge with the main thread, after which we introduce a thin thread to decorate the teeth (on 37 loops).

Step 7. We also collect these cloves with the main thread of yarn.

Step 8 Above the cloves we put aside 12 loops, and in the middle - 13 loops knit with an elastic band 1x1. The last loop of each row must be connected to one of the delayed loops.

Step 9 We turn to the formation of the sock.
Step 10 We knit 2 more rows according to the pattern and close the work.
Step 11. We process the edge of the tracks with a crochet with a hook.

Step 12. The product is ready.

And here are more traces on two knitting needles: a simple knitting method is to create a single patch, from which the finished product is formed. However such a product cannot be knitted without seams: reinforcement should be made from the toe to the foot so that the footprint fits well on the leg.

Unusual ways of knitting footprints never cease to delight craftswomen with new ideas.

Various simplified methods can also be used for knitting baby booties.

Our grandmothers also knitted booties and footprints, in whose arsenal there were only a few methods and home-made patterns. Thanks to modern technology, today, video tutorials often come to the aid of craftswomen with a description of such a process as knitting knitting with knitting needles with a description and diagrams on two knitting needles.

How to knit footprints on 2 knitting needles: the easiest way

An easy way to knit footprints is to create a soft semicircle using the short row technique.

On knitting needles, size 3 or 4, we collect 18 loops of the main color yarn, knit a full row of facial (the thread is located behind the knitting). To create a pattern in stripes, we introduce a thread of a contrasting color and knit 13 facial loops. We unfold the work, and again 13 loops in the same color in the opposite direction.
Yarn over in new row and knit 16 stitches. knit with the main color, unfold and make a return of 16 loops (the thread is located at work).
The next 2 rows will consist of 7 loops, tied in a contrasting color. At the end of each row, when you turn the work, wind the thread forward. We remove the new loop (8 in a row) and turn the work. After that, we start the thread forward, the loop is transferred to the auxiliary knitting needle, the thread goes back. Knit stitches to the edge, forming a shortened row.
We make edge loops with a crochet, and then we knit in the following sequence: 2 rows (even and odd) of 16 loops, and then 2 rows of 13 loops made in a contrasting color. The next pair of rows is knitted in 16 loops, and after it - in 7. The alternation can be like this: 16-13-7-13-16.
IN in the course of work, you will get a soft semicircle: outer arch in length, like 2 foot lengths. Try on while knitting to guess the size.
At the end of the work, close the loops and fasten the thread. Leave the tail long to thread the needle and sew the short sides of the semicircle and a line along the bottom arc.
To work the toe, start knitting a rectangle, and near the outer bone of the foot, work the toe in short rows, and then knit the rectangle again.

It is easy to create knitting needles on your own. The description is in the article.

Footprints, handmade from soft yarn, are a warm piece of clothing that is pleasant and comfortable to wear in winter under winter shoes and at home. It's something between socks and slippers. You can give them to your friends or relatives. How to create traces yourself is described in this article. Below you will find detailed diagrams with descriptions.

How to knit simple footprints on two knitting needles: step by step instructions for beginners

For knitting footprints, it is better to use acrylic threads with the addition of wool. Thanks to this, the products will turn out soft, warm and pleasant to the touch. These "slippers" are perfect for wearing in winter. If the footprints are needed for wearing in the off-season, then they can be knitted from cotton threads. Feet will not sweat in them, they are always convenient and comfortable. Here is a step-by-step instruction for beginners that will help you to knit simple heels on two knitting needles:

Product size - 38. You will need 1 skein of thin acrylic threads with the addition of wool.

See clearly in the video how you can still make heels with two knitting needles - easily and with minimal time.

Video: Sledki on two knitting needles an easy way to knit

How to knit footprints on two knitting needles without a seam: a diagram with a description

Seamless knit footprints can be worn with boots. They do not interfere with the movement of the leg, like socks, but are just as comfortable and pleasant to wear. Above, knitting footprints for beginner craftswomen was described. This model is also seamless and easy to knit. Below is another description of knitting seamless footprints on two needles. Here is a schematic image of knitting with a description:

Product size 37-38.

Another interesting seamless footprint pattern can be done differently. See the video for details.

Video: Super comfortable footprints without seams on two knitting needles. Lesson 269

How to knit footprints on two knitting needles with a beautiful pattern: a diagram with a description

You can safely meet guests in socks or footprints with an original picture-image - it will be elegant and beautiful. This model is knitted as easily as the previous one - on two knitting needles. The drawing is simple and even a novice craftswoman can create it. Study the schematic image with the description and you will be able to create knitted heels on two knitting needles with a chic pattern:

Product size - 38. It will take half a skein of one color and half or even less of another shade. You can knit footprints of the same color, but in two tones it will turn out more interesting and original.

The Norwegian pattern looks original and is suitable for things to be worn in winter. This pattern is winter, New Year's. Knitting it is not difficult, but you need to carefully follow the sequence of all rows to get an even and beautiful pattern.

Video: Footprints with a Norwegian pattern. Knit or not?

How to knit footprints on two knitting needles with braids around the edges: a diagram with a description

To create knitted braids on knitting needles, you will need a third knitting needle. In the model below, we will use needles for knitting socks with fishing line. The knitting pattern is simple, and the description is detailed - all this will help create tracks with braids around the edges.

From 1 to 18 row

From 19 to 40 row

Similarly, tie the second trace.

How to knit traces on two openwork knitting needles: a diagram with a description

For openwork footprints, choose dense threads so that the model eventually keeps its shape well. Below is a description of the knitting pattern for three size ranges: 35/37, 38/40, 41/43, which are suitable for such a foot length of 22, 24, 27 cm. Prepare for the process no more than 1 skein of thread, sock needles by 2.5 . So, a diagram with a description with which you can create footprints on two openwork knitting needles:

Openwork pattern

Cast on 57 (57) 61 sts on two needles. Then move on to knitting in a circle. The first knitting line is facial, the second is purl. Then knit the pattern according to scheme No. 1.

Video: Beautiful knitting needles. Knitting footprints. Knitting needles.

How to knit traces on two deep knitting needles: a diagram with a description

Deep footprints are as warm as socks. They are not suitable for wearing in dress shoes, but they are nice to wear at home, and with their help you can show off your beautiful knitting skills to your guests. Below you will find a description of knitting rainbow footprints. The main color will be one, and 2-3 other shades of thread are needed to give the model an interesting gloss. Here is a diagram with a description of deep iridescent tracks knitted on two knitting needles:

It will take one skein of yarn of the main color and a few threads of juicy shades.

Also tie the second trace. Such a model will perfectly decorate your life, especially on gloomy winter evenings.

How to knit multi-colored footprints on two knitting needles from the remnants of yarn: a diagram with a description

If you knit a lot, then you definitely have leftovers of multi-colored yarn that you would like to attach somewhere. An excellent opportunity for this is to knit multi-colored footprints on two knitting needles from the remnants of yarn. In the end, it will turn out as if you knitted it specially using the patchwork technique - this is a patchwork knitting technique. Here's a diagram with a description:

Prepare yarn of the same thickness but different colors. It can be two or more shades. The more colors you combine in one model, the more interesting.

Here is another example of how you can knit stylish footprints from leftover yarn - simple, but warm and interesting.

How to knit footprints on two knitting needles in short rows: a diagram with a description

Knitting with short rows is a simple knitting technique, but the products are original and beautiful. You will tie such heels in a couple of hours - quickly and easily. Here is a schematic representation of knitting with a description for footprints on two needles in short rows:

You will need threads of two tones, preferably a dense carpet. Size - 38, foot length - 24-25 cm. Take half a skein of one color - the main one and a little less - another color.

Job description - start

Important: The knitted semi-circle can be longer or shorter, depending on the size of your foot. Therefore, during knitting - try on.

How to knit footprints on two knitting needles with a Pletenka sole: a diagram with a description

Woven soles are warm and comfortable. Use acrylic yarn with wool thread. This pattern is easy to knit. For the heel, you can additionally “put in” a synthetic thread for durability. Here is a schematic representation of knitting with a description for footprints on two needles with a braided sole:

How to knit footprints on two knitting needles with a herringbone: a diagram with a description

To create footprints with such a pattern, prepare threads of two tones, better contrasting. It will turn out very stylish and original. Such products can be worn under winter boots or at home when it gets cold. A diagram with a description that will help you knit the tracks on two knitting needles with a herringbone:

You will need a little yarn: half a skein of both colors. You will get size 38 footprints. Start knitting like this:

Here is the knitting pattern for the herringbone pattern:

Schematic representation of the herringbone pattern

How to knit footprints on two knitting needles chamomile: a diagram with a description

If you want to knit a chamomile on slippers, then you will have to use a hook, since this part needs to be knitted in a circle. You can knit ordinary footprints according to any of the patterns described above, and decorate them with a crocheted chamomile flower. In you can read how a flower is knitted correctly, for example, with the Popcorn pattern. Using this pattern, you can knit a beautiful chamomile that will decorate your footprints. Here is the knitting pattern for the popcorn pattern:

Chamomile pattern "Popcorn"

How to knit footprints on two Portuguese needles: a diagram with a description

The motives of Portugal are a little bewitching. The knitting pattern based on this country will turn out to be very original and stylish. Despite the external complexity of the pattern, it fits simply.

Portugal patterns

How to knit footprints on two knitting needles for women: a diagram with a description

Here is another model of female footprints - interesting and unusual. It is easy to tie it, and there will be no limit to the admiration of your girlfriends and relatives. Here is a schematic image with a description for footprints on two women's needles with a tie strap:

How to knit footprints on two knitting needles for men: a diagram with a description

Male footprints are just as easy to create as female footprints. Below are diagrams and descriptions of the knitting of two models of male footprints. Your soulmate will definitely like one of them. Choose the threads of your husband's favorite color and get to work. You can even do without a scheme - everything is simple. Description of knitting sledkov on two knitting needles for men:

Advice: When knitting the sole, use a thread folded in two layers. So the product will be more durable and wearable.

How to knit footprints on two knitting needles for children: a diagram with a description

Children's footprints should be bright and beautiful. Surely, you have multi-colored threads that remained after knitting other products. From them you can create beautiful slippers with your own hands that your baby will like.

Prepare threads of different colors. You can alternate the color in 2-4 rows. Threads are better to choose contrasting colors. Size - 34-35. Here's a diagram with a description:

Video: baby tracks - slippers, knitting

Table of women's, men's and children's sizes of footprints and footprints for knitting

Footprints are the same as socks, only short ones. Therefore, to calculate the loops for a specific size, you can use the sock size chart. Using this table, it is easy to calculate how many loops to knit for a particular size, and a separate part of the track. For example, feet, toe or heels.

The most beautiful knitting needles for women, men, children: photo

You always want to knit a beautiful thing for yourself or your household so that it gives positive emotions. Here are a few photos showing beautiful models of women's, children's and men's footprints: