Collar necklace crochet pattern. Crochet lace collar patterns

Crocheted lace collars made from thin threads always look stylish and elegant. They can be used as an addition to your evening classic black dress, or to decorate your daughter’s school uniform. In any case, we will look at free diagrams, videos and master classes on how to make a collar for beginning needlewomen.

Crochet collars with diagrams and photo descriptions

Collars can be knitted using various techniques, below we present you a small collection of crocheted collars with patterns and descriptions from Japanese magazines “Crochet sweater”, “Kartopu”, “Bian Zhi Shi Jie”.

Knitted lace collar crocheted from thin threads

Before we start knitting this collar model, we will prepare all the materials: white yarn (viscose) - 50 g, thin hook (up to 1), scissors. The size of our collar is 12 centimeters wide and about 45 centimeters in circumference.

Let's take a look at the description of the notation:

Popular articles:

○ – air loop (v.p);
͡ – connecting column (s.st.);
+ - single crochet (dc);
Columns - a column with 1, 2 crochets (Fig. 1);
Pico, consisting of 3 c. p. and 1 st.b.n., knitted in the 1st century. n. (Fig. 2);
Arch made of vp, the number of loops is indicated under the arch (Fig. 3);

The signs connected at the top are unfinished posts that are crocheted together. Thus, the icons with a connection at the bottom are columns connected from one loop at the base.
Photo of the collar pattern itself

Openwork crochet collar on a dress

For the next knitted product we will need white cotton threads - 40 g. We begin to knit a strip of checks, the same as for fillet knitting, according to the described pattern (see photo chart):

double crochet (dc), + 2 ch, then move on to the main pattern.
Pattern repeat (for those who don’t know what repeat is - this is the number of loops or columns that must be repeated to the end of the entire row of the product, that is, repetition of the action) is equal to 4 cells, so we dial an even stripe equal to the repeat + 1 cell for symmetry.

Our collar has only 53 loops, so it fits snugly around the neck. The rows that are drawn in red in the diagram: dc are knitted under the arch, dc - in the third column in a group of four dc. Next we work according to the described scheme:

At the end, we introduce a ribbon no more than 3 mm wide into the first row. Our festive collar on the dress is ready!

DIY school uniform collar

On the Internet and knitting magazines you can find various descriptions and patterns of crocheted collars and cuffs for school uniforms.

For beginner needlewomen, we have chosen an easy-to-follow photo pattern and description for knitting:

We knit 5 chain stitches and connect them in a circle. We knit 3 yarn over loops (dc), make 11 dc in the circle. Then we turn the collar over and knit another 12 rows similar to our pattern. We make 4 n.p., dc. knit in the first ch. We repeat the action 10 more times. Do 1 dc. in the top row from v.p. Turn the product over again. We knit another 6 n. p., then st.n. to the base * 10 times. We knit 1 tbsp. in the third of 5 vp. We knit a border - 1 tbsp, then 3 tbsp.

The collar for the young schoolgirl is ready!

Crochet collar based on Irish lace - master class

Irish lace is highly valued in fashion, because in order to knit a product using this technique, you must have already defined skills. We will need natural cotton yarn - 100 g, a size 2 hook and several white beads.

To make this Irish-style collar, we will need to knit the parts separately, later combining them into one product using a pattern.

Knitting pattern for 5 large flowers:
1st r. - cast on 6 vp, connect the first and last loop into a ring;
2nd r. - we tie 21 treble stitches into the center of the ring;
3rd r. — “crawfish step” (mating of ordinary st.b.n. from left to right);
4th r. - 7th century p. + 1 s. Art. * 6 times (7 petals);
5th r. - we knit 12 treble stitches into each arch.
Next, we look at the patterns, knit 4 trefoils (diagram 1), 6 six-leaf leaves (diagram 2), and circles (diagrams 3,4).

We lay out all the connected elements face down on the pattern. Next, we sew all the elements together. We tie the inner edge of the Irish collar, gathering it. (collar length is equal to neck circumference approximately 35 - 38 centimeters). Next we knit a stand 4 cm st.b.n. On one side we make a hinged loop for a button, on the other side we sew a button. Finally, decorate the collar with beads.
Photo example

How to crochet a collar for beginners video

After watching this free video, every novice needlewoman will be able to learn how to knit a collar. In the video we will look at how to do the basic elements of crochet that beginners need to learn.

Simple lace crochet collar pattern with detailed description

You can knit a simple collar using different techniques and descriptions; we have chosen the simplest patterns for you.

1 Scheme. Knit a chain of chain stitches of pre-measured length. We follow the instructions below:

1st row: knitting st.b.n.;
2nd row: alternate stitch, 2 n. and a fork, then knit 2 tbsp. with two yarn overs, make 2 ch between them. For a round shape, we knit the details through 1 loop of the first row;
3rd row: knit in the same way as 2, with the exception of the fork, consisting of 4 tbsp.;
4th row: add another 2 tbsp. (6);
5th row: knit 8 tbsp. under v.p. and 1 tbsp. into the loop of the previous row.
2 Scheme. We knit a black and white collar. We make 80 ch. and then follow the instructions:
1st row (white threads) - dc in each stitch (80);
2nd r. - 1 dc, skip 1 loop, in the next we knit 1 dc, 2 ch and again 1 dc, repeat everything from 1 skipped loop;
3rd r. — st.n. knit on st. of the previous row, in a chain of 2 vp. knit 2 dc, 3 ch and 3 dc;
4th r. — st.n. knit on st. the previous row, in a chain from 3 v.p. knit 3 dc, 4 vp. and 3 tbsp;
5th row (black threads) - st.n. knit on st. the previous row, in a chain of 4 ch. knit 10 st.n

At the beginning of each r. make 2 lifting loops. The product must be symmetrical. We will finish the last row with several chain stitches, fasten them to the base of the same row, thus creating a buttonhole. On the other edge we sew a beautiful button.

Openwork crochet collar description and diagram

We collect a chain of 17 ch and another 3 ch for lifting, turn the product and follow the r pattern:
1st: 4 dc, 3 half double crochets, 10 dc.
2nd: 1 c. p. for lifting, 10 treble crochets, 3 half double crochets, 5 treble crochets.
We alternate these 2 rows until the product reaches 38 centimeters from the beginning of knitting.
We turn the product and tie it with a fancy pattern according to the diagram.

At the end, distribute and sew 5 buttons, making loops for them.
Photo of an openwork collar

In my case - a 0.5 mm hook, thin mercerized cotton and wooden beads - large and small.

So, we collect a chain of air loops with a length equal to the circumference of the neck.

This bead will serve as a button clasp for our collar. We go around it with our chain of air loops, quite tightly and knit a couple of single crochets.

Next, we will put the beads on the chain and go around them with air loops, in the spaces between the beads we knit single crochets, you can choose any distance between the beads that seems necessary to you, accordingly, the number of single crochets can be different, I have 3 of them between the beads .

We should end up with a chain of beads like this:

Now we collect air loops to form a loop on which our collar will be fastened. And you can immediately tie it either simply with single crochets, or, as I did, using the “crawfish step” method.

Next we knit double crochets up to the bead, and into the loops above beads - single crochets. My distance between the beads is small - only three dc, so I made “fans” from double crochets in the spaces between the beads. If the distance is large, then it can be filled either simply with double crochets, or by knitting several “fans” of double crochets.

As a result, we get the following chain:

Next, we knit the halves of our collar separately, symmetrically to each other. We knit randomly, with double crochets and, where necessary, with single crochets (again, it all depends on your idea, what shape of collar you want to get, there are many options). Then we tie the resulting collar. I tied it first with single crochets and then with a crab step.

Now we knit the elements with which we will decorate our collar. I have flowers of different sizes and several leaves. There are a lot of patterns for similar elements on the Internet, or you can come up with your own ideas whenever you find inspiration :) I left long tails of thread on some of the flowers; I will actually use them to sew the flowers to the collar.

Now let’s make compositions of decorations directly on the collar to imagine in which places it is better and more beautiful to sew them on:

Well, the final stage: we sew on all our flowers, complementing the composition with small wooden beads:

I hope my master class will be clear and, maybe, will add inspiration to someone. If the experiment turns out to be successful, then I will continue to share with you the process of creating my works :) Enjoy your creativity everyone!

Report to moderator

Having determined the desired length of the collar along the neck line, cast on a chain of air loops with white yarn at the rate of 1 repeat = 6 loops + 3 loops for symmetry + 1 lifting loop. Knit 4 rows according to the pattern, cut the thread and carefully hide the tail.

Tie the collar along the neckline with black yarn in one row of single crochets, forming ties at the same time. To do this, knit a chain of 20-30 chain stitches, tie the neckline and finish the row with a chain of chain stitches.

Sirloin collar Crosses

The loin collar from the Magic Crochet magazine is crocheted using thin cotton threads using crochet number 1. The collar width is about 6cm, the length along the neck line is 40cm.

They begin to knit the collar with Bruges braid, which runs along the neck line (in the diagram, half of the collar is indicated by an arc). Next, the collar is knitted using this braid using fillet mesh. Finally, the collar is tied with 2 rows of arches made of air loops.

A silk ribbon 1 cm wide and 110 cm long is inserted into the arches of the Bruges braid, which acts as a tie.

Collar Katarina

Another collar from the Spanish magazine MYM Cuellos is crocheted using thin cotton threads using No. 1 crochet. Collar width 7 cm.

The collar begins to be knitted with a chain of air loops of the required length. The pattern repeat consists of only 4 loops, so the collar can be made to any length along the neckline. The beginning of knitting is indicated in the diagram with an asterisk.

The collar pattern is simple, but requires accuracy and even knitting. The expansion of the collar occurs due to an increase in the number of air loops in the arches and columns knitted on the arches. Having knitted 16 rows, finish knitting the main part of the collar at the point indicated by a circle divided in half.

Attach the thread to the starting point of knitting and tie the collar on 3 sides with arches of air loops, along the neck line, knit single crochet stitches through 2 air loops and knit the 2nd row of binding along the narrow sides and the flying part of the collar. The end point of knitting is indicated by a black square.

Starch the finished collar, arrange it according to size and let it dry completely.

Openwork collar Pineapple

The openwork collar from Valya-Valentina magazine for 2008 is crocheted from thin cotton yarn with crochet No. 1. Collar width 8 cm.

The collar is knitted with the popular and beloved pineapple pattern. This pattern has many variations and looks impressive in a variety of incarnations. This collar combines a small pattern with French mesh, which gives the collar a special airiness.

Start knitting with a chain of 217 air loops (18 reports of 12 loops + 1 loop for symmetry) and then knit according to the pattern.

Starch the finished collar, stretch it to size and leave until dry.

Peter Pan Collar

The openwork collar from the Magic Crochet magazine is crocheted from thin cotton yarn using No. 1 crochet. Collar width 8 cm, neckline length 47.5 cm.

Start knitting a collar with a chain of 183 air loops and then knit 4 rows according to the pattern. In the 4th row, each half ring is knitted separately, the knitting direction is shown in the diagram with arrows. Having finished the 4th row, the thread is cut, the end of the knitting is shown in the diagram with a black arrow. The 5th and 6th rows are knitted in the same direction as the 4th row. The starting points for knitting these rows are indicated in the diagram with light arrows.

Having finished knitting the 6th row, attach the thread to the beginning of the 1st row, tie a button loop and tie the neck line with single crochets. Tie the button and fill it with padding polyester or tie a bead of a suitable size.

Collar Butterfly Wings

Openwork collar from Fashion Magazine, model Tatyana Piskunova. The collar is crocheted from 100g cotton yarn using crochet number 1.

The collar consists of two halves, each half is knitted according to the pattern, repeating rows 1-14 9 times. Single crochets are knitted behind the back wall. The halves of the collar are connected with half-columns so that the scallops are turned towards each other. Tie the neck line with one row of single crochets with 2 chain loops between them and one row of single crochets with “picot”.

Collar Rings

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 7 cm.

The collar is knitted in the transverse direction according to the principle of continuous knitting. The beginning of knitting is indicated in the diagram with an asterisk. Having knitted a collar of the required length, without cutting the thread, tie the collar along the neck line. The end point of knitting is indicated by a black square.

Collar Alice

This cute double collar from a Japanese magazine is crocheted using round motifs using size 4 crochet. Yarn consumption 45g.

The width of the collar when unfolded is 15 cm, the diameter of the motif is 8 cm.

The collar consists of 15 motifs that are connected to each other during the knitting process. The location and connection points of the motifs are clearly visible in the diagram. The length of the finished collar on the long side is 64 cm, on the short side - 56 cm.

A silk ribbon 6 mm wide and 130 cm long is inserted into the finished collar, which serves as a tie and slightly shirrs the collar. It is precisely due to this shirring that it lies so effectively. The line for pulling the ribbon is shown in red in the diagram.

Isabel Collar

The openwork collar from the Magic Crochet magazine is crocheted from thin cotton threads with a size 1.5 crochet hook. Collar width 7 cm, neckline length 37 cm.

Start knitting with a chain of 151 air loops and then knit 8 rows according to the pattern. The 9th row is knitted in the round, having finished knitting along the flap of the collar, the narrow sides and the neck line are tied. The black triangle in the diagram marks the end point of knitting.

Place the finished collar on a horizontal surface according to size, moisten it and let it dry completely. Tie a chain of chain stitches and thread it through the edge of the neckline trim as a tie.

Openwork collar Buttercups

The openwork collar from the Valya-Valentina magazine is crocheted from cotton yarn No. 0.8. Collar width 7 cm.

Start knitting a collar with a chain of air loops at the rate of 1 repeat = 10 loops + 1 loop for symmetry. Next, knit 10 rows according to the pattern. Starch the finished collar, arrange it according to size and leave until completely dry.

Collar Quatrefoils

A wide openwork collar from an Asian magazine is crocheted from 90g cotton yarn using No. 2.5 crochet. Collar width 19.5cm, neckline length 40cm.

The collar is knitted starting from the middle line, in one direction and the other according to the pattern. Upon completion of knitting the main part, the collar is tied in 3 rows along the neck line and one row along the remaining sides.

Separately, knit a tie 90-100 cm long with flowers at the ends, which is pulled into the second row of the neckline tie.

Pearl Collar

Collar with pearl beads from Magic Crochet magazine made of thin cotton threads crocheted No. 1.5. Collar width 8 cm, neck length 38 cm.

Begin knitting a collar with a chain of 149 air loops and then knit according to the pattern, knitting pearl beads indicated by circles. Methods of knitting with beads can be seen in the following model. At the end of knitting, without cutting the thread, tie the narrow side of the collar, the neckline and the second narrow side.

Alicia beaded collar

An openwork collar with knitted beads from the Beaded Crochet magazine is crocheted with thin cotton threads No. 0.75. Collar width 7.5 cm, neckline length 32 cm.

Start knitting with a chain of 147 air loops + 3 lifting loops instead of the first stitch and then knit according to the pattern. Pay attention to the increases needed to widen the collar.

Circles and crossed out circles indicate places for tying beads. Tying can be done in 2 ways.

If the hook fits freely into the hole of the bead, then the thread is pulled with the hook through the hole of the bead.

In the case of a small hole, you must first string the beads onto a thread and knit them according to the pattern.

Thread a narrow satin ribbon matching the color of the beads into the first row of columns of the finished collar.

Sakura collar

Delicate collar from the website of the Japanese manufacturer of yarn and needlework goods Daruma, knitted from 45g of fine yarn with a No. 1.5 crochet hook. Collar width (maximum) 21 cm, length along the neckline 58 cm.

Knitting a collar begins with 2 strips of Bruges braid, on which 18 rows of French mesh are knitted with arches of 3 air loops. Next, an openwork binding is made, with which 14 flowers and 13 trefoils, knitted separately, are attached.

The free edges of the Bruges braid are tied and laces made of air loops with trefoils at the ends are attached.

Richelieu collar

An openwork collar with voluminous “popcorn” elements from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 1.25. Collar width 7.5 cm.

The collar begins to be knitted with a chain of air loops and then knitted according to the pattern. The beginning of the binding is indicated by a crossed out circle, the end by a black square.

You can watch a video tutorial on how to knit a three-dimensional popcorn element here.

Openwork collar Amelia

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads using No. 1 crochet. Collar width 10 cm.

The collar begins to be knitted with a chain of air loops and then 16 rows are knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk, the end of knitting is indicated by a circle divided in half.

Attach the thread to the beginning of the knitting, this place is indicated by a circle with a cross inside. Knit 1 row of binding along the narrow sides and flap of the collar. The end of knitting is indicated by a black square

An elegant collar from The Knitter magazine is crocheted from 25 g of yarn (67% merino wool, 33% nylon; length 95m/25g) with crochet number 4. The collar width is 6 cm, the length along the neckline is 41 cm.

The collar is presented in 2 versions - simple with ties and with beads on the button. For a beaded collar you will need 106 glass beads with a diameter of 6mm.

Both collar options begin to be knitted with a chain of air loops (for a collar with a button, immediately form a loop for it), on which 71 single crochets are knitted, and then knitted according to the pattern.

Before knitting a collar with beads, first put them on the thread. Beads are knitted into double crochets of the 5th row and into the picot of the last row.

Romantica collar

The elegant collar I found on the Pink Rose Crochet online blog is crocheted from cotton yarn with size 2.5.

The collar is knitted crosswise, which makes it possible to adjust its length during knitting. Start knitting with a chain of 17 air loops + 5 lifting loops and then knit according to the pattern (the number of rows in the finished collar should be a multiple of 6). The beginning of knitting is indicated in the diagram by the letter A.

The knitting pattern uses crossed stitches with one crochet. You can watch a video tutorial on how to knit this element here:

Upon reaching the desired length, perform 2 rows of binding, forming corners.

The ties are knitted in one strip along with the neckline trim - 3 rows of single crochets behind the back wall. When casting on stitches along the neckline of the collar, adjust it so that the collar fits better.

Lace trim for square neckline

The lace trim for the square neckline from Puntillas Aplicadas magazine is crocheted using cotton yarn using size 3 crochet.

Collar Blooming pineapples

The openwork collar from the Valya-Valentina magazine for 2005 is crocheted from cotton threads No. 0.75. Collar width 12 cm.

Start knitting with a chain of 182 air loops (9 repeats of 18 loops + 17 loops for symmetry + 3 lifting loops) and then knit 16 rows according to the pattern.

Having knitted 16 rows, do not cut the thread, but continue knitting, tying the collar in a circle. Finish the row with a connecting column at the beginning of the 16th row.

Starch the finished collar, stretch it to shape, and leave to dry.

Dolly set - collar and cuffs

A delicate set consisting of a collar and cuffs from the Magic Crochet magazine. The set is crocheted from cotton yarn No. 3.5. Collar width 6.5cm, neckline length 42cm. The cuffs are 17 cm long and 5 cm wide. Knitting the collar begins with a chain of 165 air loops + 1 rise loop. Starting from the 3rd row, they begin to knit a “thickened mesh”. It is knitted like this (it’s not very clear in the diagram) - 2 double crochets, 3 chain stitches, single crochet at the top of the second stitch.

After 4 rows of “thickened mesh”, cut the thread and knit 3 rows from the initial chain towards the neckline. Next, tie the narrow edge, knit the 5th row of the “thickened mesh” around the perimeter of the collar and tie the second narrow edge of the collar. The cuffs begin to be knitted with a chain of 58 chain stitches + 3 lifting loops. After 2 rows of “thickened mesh”, the narrow edge, the initial chain and the second narrow edge of the cuff are tied.

To decorate the collar, knit a flower according to the pattern, embroider it with pearl beads and hide a fastener under it - a button, button or hook.

Bella Collar

A small collar from the Brazilian magazine Pinqouin is crocheted from Pinqouin Bella yarn (100% mercerized cotton, Length 405m/150g) with crochet number 2.5.

Knitting a collar begins with a chain of 150 air loops. Knit the 1st row of single crochets with the 6th chain stitch from the hook, forming a buttonhole, and then knit 5 rows according to the pattern.

Lay out the finished collar according to size, moisten it and let it dry completely. Sew on a button.

Margarita's work. I have seen many interesting collars from different needlewomen. But the most important question that I always ask myself before I start knitting is whether this item is wearable?

interesting selection for the site!!!
*** Crochet flower patterns for decorating products

Very often I see very large, massive collars, which look somewhat out of place in everyday life. So I decided to make a small collar that complements and updates a regular plain dress, blouse or simple t-shirt. It doesn't wrinkle, doesn't break, and can be taken off and put in your purse. This accessory has long appeared in fashion shows of famous designers.

There is no special pattern, just measure the neck circumference and knit according to the ribbon lace pattern (for example, as in the photo), or choose any other pattern from the Internet. When you get such a strip of flowers (for example, there are 32 half-flowers on my neck), tie it with air loops, pulling it a little from above - giving it the shape of a collar (around the circumference of the neck, approximately like the shape of a horseshoe). That is, the collar needs to be shrunk at the top, and widened at the bottom, since it should have a rounded shape.

You can tie it several times so that the collar holds its shape better. Next, tie the TOP part with single (or double) crochets. These posts are needed to thread the ribbon through. In principle, the collar is ready. But if you want to give it the appearance of a necklace, then select decorative threads, beads, pearls or whatever you want and first separate each petal by crocheting it with a decorative contrasting thread, then embroider each flower by hand with a needle - a larger bead in the middle, a smaller one at the edges, in general as your imagination dictates! This part of the work is the most creative (and painstaking), choose threads and decor to your taste and you will get a fashionable and beautiful accessory, in a single copy.

Knitting patterns:

Collar Vita

The openwork collar from the Valya-Valentina magazine for 2009 is crocheted from 80g of Vita Pelican yarn (100% double mercerized cotton; length 330m/50g) with crochet number 1. Collar width 10 cm.

Knitting a collar begins with a chain of 214 air loops (23 repeats of 9 loops + 4 loops for symmetry + 3 lifting loops) and then knitted according to the pattern.

The expansion of the collar occurs due to an increase in the number of air loops in the arches of the French mesh.

After finishing knitting, tie the collar along the narrow sides and neckline with the 1st row of single crochets and the 1st row of “crawfish step”. G

The cotton collar needs to be starched, laid out according to size and left to dry completely.

Jane Eyre Collar

Knitting begins with a chain of 105 air loops and then knits according to the pattern. The finished collar is decorated with a button closure or crocheted laces.

Collar Blooming pineapples

The openwork collar from the Valya-Valentina magazine for 2005 is crocheted from cotton threads No. 0.75. Collar width 12 cm.

Start knitting with a chain of 182 air loops (9 repeats of 18 loops + 17 loops for symmetry + 3 lifting loops) and then knit 16 rows according to the pattern.

Having knitted 16 rows, do not cut the thread, but continue knitting, tying the collar in a circle. Finish the row with a connecting column at the beginning of the 16th row.

Starch the finished collar, stretch it to shape, and leave to dry.

Double layer collar Pineapples

A beautiful collar with a pineapple pattern from an Asian magazine is crocheted from 110g yarn using No. 3 crochet. The length of the thick part of the collar is 50 cm.

The collar consists of a dense part 10 cm wide and pineapple leaves attached to it on both sides. The knitting density of the main part is 25 loops and 14 rows in a 10x10 cm square.

They start knitting the collar from the main part, for it they cast on a chain of 25 air loops and knit according to the pattern, finishing the knitting in a semicircle. The second semicircle is knitted on the initial chain of air loops.

After this, pineapple leaves are tied to the main part, 10 on one side and 9 on the other. The diagram next to each leaf shows in parentheses the rows of the main part to which the leaf is attached.

Finally, tie the ties with leaves at the ends, the length of the ties is 34 cm (32 rows).

Pentagonal collar

Pentagonal collar from Lets Knit Series Hot Line 6960/1993. The collar is crocheted from 35g cotton yarn using crochet number 2. Collar width 11cm, neckline length 44cm.

The collar consists of 8 pentagonal motifs, connected to each other during the knitting process of the last row. When all the motifs are connected and connected, they are tied in a circle in 2 rows according to the pattern.

Starch the finished collar, straighten it to size and leave until completely dry.

Collar Lily

The openwork collar from Valya-Valentina magazine for 2007 is crocheted from cotton yarn with size 1.5. Collar width 13 cm.

The repeat of the collar pattern is only 2 loops, thanks to this the size of the collar along the neck line can be made to any size. A simple pattern, accessible to knitters of any level, looks very gentle and romantic.

Start knitting with a chain of air loops of the required length and then knit 14 rows according to the pattern. Without cutting the thread, tie the collar along the narrow sides and neckline with single crochets.

Trim for square neckline

The lace trim for the square neckline from Puntillas Aplicadas magazine is crocheted using cotton yarn using size 3 crochet.

Collar Carved leaves

An elegant collar from the Spanish magazine MYM Cuellos is crocheted using thin bobbin threads with a size crochet size of 0.75. Collar width 6 cm.

Begin knitting a collar with a chain of 261 air loops (excluding lifting loops), on which a series of single crochet stitches are knitted through 3 chain loops (the first stitch is formed by lifting loops). Next, tie 29 leaves, attaching them to every 3rd column of the 1st row. To make the leaves carved, knit single crochets behind the back wall of the loop.

Connect the tops of the leaves with a new chain of chain stitches, knitting 13 loops between the leaves. On this chain, tie 3 rows of binding.

Along the neck line, knit 3 rows with double crochets, adding 12 chain stitches on each side to the original chain.

Collar Bruges lace

The openwork collar from the Valya-Valentina magazine for 2006 is crocheted using thin cotton yarn No. 1.5-1.75. Collar width 18 cm.

Knitting a collar begins with knitting the inner motifs-forks. Link 11 motifs by connecting them together.

After this, tie a strip of wils with Bruges braid along the outer edge of the collar.

Lastly, the Bruges braid is knitted along the neckline.

Place the finished collar on a horizontal surface, give it the desired shape, moisten it and leave until completely dry.

Collar Soso

The large lace collar from the Valya-Valentina magazine for 2009 is crocheted from Coco Vita Cotton yarn (100% mercerized cotton; length 240m/50g) using crochet number 1. Collar width 11cm.

Start knitting with a chain of 159 air loops (15 repeats of 10 loops + 9 loops for symmetry) and then knit 17 rows according to the pattern.

Tie 2 ties from air loops of arbitrary length.

Starch the finished collar, stretch it to size and leave to dry.

Collar Amelia

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads using No. 1 crochet. Collar width 10 cm.

Collar Daniela

The openwork collar from the Spanish magazine Ganchillo Puntorama is crocheted from 20g of fine cotton yarn using a No. 1.5 crochet hook. Collar width 12.5 cm, neck length 39 cm.

Knitting a collar begins with a chain of 125 air loops (5 repeats of 24 loops + 5 loops for symmetry) and then knit 11 rows according to the pattern.

In the 12th row, the tying is done with arches of air loops, first along the flying part of the collar, adding a “picot”, and then along the narrow side, the neck line and the second narrow side.

Sun Collar

The collar begins to be knitted with a chain of air loops of the desired length, the beginning of knitting is indicated in the diagram with an asterisk. Next, knit 3 rows with double crochets behind the back wall, knitting a button loop in the 2nd row.

Tie the main part of the collar with French mesh, leaving 12 stitches free on both sides.

Decorate the edge of the collar with round motifs, connecting them together and attaching them to the main part of the collar while knitting the last row.

Cat Paw Collar

Delicate openwork collar from Valya-Valentina magazine for 2007.

The collar, 9 cm wide, is crocheted from cotton yarn “Snowflake” with crochet No. 1.25.

Start knitting with a chain of 109 chain stitches (1 repeat = 9 ch + 1 ch + 3 ch rise). Next, knitting continues according to the pattern. Having finished knitting, and without tearing off the thread, tie the collar with single crochets along the narrow sides and according to the tying pattern along the neck line.

For ties, chains of air loops are knitted, at the end of which rings are made - the chain ring is tied tightly in columns.

The finished collar needs to be starched, stretched to size and left to dry completely.

Collar Sunflower

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 1.25. Collar width 7 cm.

The collar begins to be knitted with a chain of air loops and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk.

After finishing knitting the collar, without breaking the thread, tie the narrow sides and the neckline with one row of binding according to the pattern. The end of the knitting of the binding is indicated in the diagram with a black square.

Collar of large flowers

An openwork collar made of pentagonal motifs with large flowers from the Lithuanian magazine Pacios 2008 is crocheted with polyester yarn with lurex (100-120g light and 50-70g dark) with crochet number 3-3.5.

The collar consists of 6 floral motifs. Each flower is tied with 3 rows of arches, the 4th row is used to connect the motifs. In the last row of arches on the sides that form the neckline and bottom of the collar, a smaller number of air loops are knitted to straighten the lines. The neck line and the bottom of the collar are tied in a “crawfish step”.

Collar Bunches of pineapples

Large openwork collar - model by Evgenia Vysokovskaya, crocheted from 3 spools of cotton threads No. 1.25.

On a chain of air loops, knit 8 repeats according to the pattern. At the end of the pattern, each large petal is knitted separately.

Having finished knitting all the petals, knit 1 row of single crochets along the neckline and 1 row of single crochets along the entire perimeter of the collar, making a button loop.

The collar can be worn with a fastening at the front or back.

Collar Mesh

An easy-to-make openwork collar from the Valya-Valentina magazine for 2004. knitted from thin cotton yarn with crochet number 1. Collar width 6 cm.

The collar is knitted in the transverse direction, starting with a chain of 50 air loops (45 pattern loops + 5 turning loops), and then according to the pattern to the desired length.

The collar is tied along the neck line in one row according to the pattern.

The finished collar needs to be starched, straightened and left to dry completely.

Collar Solomon loops

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 0.6. Collar width 7 cm.

After the strip of French mesh, they move on to rows connected by “Solomon loops,” which are indicated in the diagram by an eye with a cross. After finishing knitting the collar, tie the narrow sides and the neckline with one row of binding according to the pattern. The beginning of the binding coincides with the starting point of knitting. At the end of the row of binding, form a button loop.

Collar Delicate pineapples

A delicate openwork collar from the Brazilian magazine Ganchillo is crocheted using thin bobbin threads using No. 1 crochet. Collar width 10 cm, neck length 44 cm.

Begin knitting a collar with a chain of 193 chain stitches (12 repeats of 16 chain stitches + 1 chain stitch for symmetry). Next, knitting continues according to the pattern. After 16 rows of the main pattern, knit 2 rows of binding in a circle. The number of air loops in the arches is indicated in the diagram by numbers.

The finished collar needs to be starched, straightened and left to dry completely.

New Year's collar

Large openwork collar - model by Evgenia Vysokovskaya, crocheted from 2 spools of cotton thread No. 10 with crochet No. 1.

On a chain of chain loops of obviously longer length, knit 1 row according to the pattern. The number of repeats of 15 loops can be any, depending on the collar length you need. For a turtleneck collar you need 13 rapports. Having decided on the length, cut off the excess air loops, securing the end of the thread, and then knit according to the pattern.

Having finished knitting, without breaking the thread, tie the collar along the narrow sides and flying edge with arches of air loops with “picot”, and along the neck line with single crochets.

The finished collar needs to be starched, arranged according to size and left to dry.

Collar Alice

The openwork collar from the Valya-Valentina magazine for 2008 is crocheted from 40g of yarn (50% cotton, 50% viscose) with a No. 1.5 crochet hook. Collar width 12 cm.

Start knitting with a chain of 189 air loops (15 repeats of 12 loops + 9 loops) and then knit 15 rows according to the pattern. Without cutting the thread, tie the collar along the narrow sides with 1 row of single crochets, and along the neckline with arches of 3 air loops and single crochets.

Starch the finished collar, stretch it to size and leave until dry.

Chain collar

An easy-to-make collar from an Asian magazine is crocheted using 20g of yarn using a size 3.5 crochet hook. Collar width 15 cm, neck length 50 cm.

Start knitting a collar with a chain of 91 chain stitches and then knit 17 rows, increasing the number of chain stitches between single crochets according to the pattern.

After this, make 4 rows of tying from fans with lush columns.

A version of the same collar made from finer yarn with mohair.

V-neck collar

The openwork collar from the Valya-Valentina magazine for 2007 is crocheted from thin cotton yarn with a No. 0.5 crochet hook. Collar width 14 cm.

Start knitting with a chain of air loops of the required length, taking into account that 1 repeat = 6 loops + 2 loops need to be added for symmetry.

The width of the collar can also be changed to suit your taste. In the photo, the collar consists of 7 rows, and the diagram shows 5. Rows 4 and 5 must be repeated again.

Starch the finished collar, stretch it to size and leave until dry.

Openwork collar Volumetric flowers

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 12 cm.

Knit 28 voluminous three-tier flowers, connecting them together.

On the inside of the chain of flowers, start knitting the mesh part of the collar, the beginning of knitting is indicated in the diagram by a crossed out circle, and the end of knitting by a circle divided in half.

Tie the outer edge of the strip of flowers 1 side by side according to the pattern.

Greta Collar

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 1.25. Collar width 8 cm.

The collar begins to be knitted with a chain of air loops of the required length at the rate of 1 repeat = 12 loops + 4 loops for symmetry and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk.

Finally, without cutting the thread, tie the collar in the round with one row of binding. The end point of knitting is indicated by a black square.

Collar Lace Leaves

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 8 cm.

Knit 8 leaves according to the pattern. The eye with a cross in the diagram indicates “Solomon loops”. You can watch a video tutorial on knitting Solomon loops.

Connect the finished leaves with 3 rows of binding along the neckline. The beginning of the binding is indicated by a crossed out circle, the end by a black square.

Lay the collar flat and connect the leaves together at the touching points.

Linen Collar Corners

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin linen threads with size 0.75. Collar width 9 cm.

The collar is knitted in the transverse direction, the beginning of knitting is indicated in the diagram with an asterisk. They begin knitting the collar with a chain of 23 chain stitches and, having knitted 1 row of single crochets, begin to expand the collar, knitting the first tight triangle.

Upon completion of knitting the main part of the collar, it is tied in a circle with one row of single crochets, complemented by “picot” along the flyaway and narrow sides. The end point of knitting is indicated by a square in the diagram.

The finished collar needs to be starched, straightened and left to dry completely.

Senorita collar

A chic collar-mantle from Fashion Magazine No. 476 is crocheted from 120 g of cotton threads with No. 1 crochet.

Knitting a collar begins with a chain of air loops, on which 26 repeats of the pattern are knitted according to the pattern. After knitting 13 rows, break the thread and knit rows 14-17 on 3 sides of the collar.

After this, on the initial chain of air loops, knit 1-2 rows and on them finishing rows from 14 to 17.

Tie the collar along the neck line with the 1st row of double crochets and a row of crab step. Make a loop and sew a button for the fastener. Starch the finished collar and iron it.

Collar Vintage

The collar-mantle with a stand from Fashion Magazine No. 405 (model by Tatyana Piskunova) is crocheted from 100 g of viscose silk with crochet No. 1. The collar is fastened at the back with 6 small buttons.

Knitting a collar begins with a chain of air loops equal to the circumference of the neck, on which an even number of arches of 5 air loops are knitted. Next, knit according to the pattern, making a lifting loop at the beginning of the odd rows.

Having finished knitting the mantle, on the initial chain of air loops, knit a stand according to the pattern. Tie the vertical edges of the collar and the top of the stand with a row of single crochets, making a picot on every third stitch. Make 6 hanging loops and sew on buttons.

Collar Spikelets

Start knitting with a chain of 281 air loops (18 repeats of 15 loops + 10 loops) and then knit according to the pattern.

Starch the finished collar, stretch it to size and leave until dry.

Collar Stripes

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from 50g mercerized cotton with size 1.25.

The collar is knitted crosswise, which allows it to be made to any required length. Expansion occurs due to an increase in the number of yarn overs in the columns. The knitting direction is shown in the diagram by arrows.

Large loin collar Rose

The loin collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 0.6. Collar width 20 cm.

The collar begins to be knitted with a chain of 412 air loops (409 loops along the neck + 3 lifting loops) and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk. Finish knitting with one row of single crochets.

Finally, tie the collar in the round with gold thread in one row of single crochets, adding a picot along the narrow sides and flap of the collar.

Collar School

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from mercerized cotton threads No. 1.25. Collar width 6 cm.

The collar begins to be knitted with a chain of air loops and then knitted 5 rows according to the pattern and cut off the thread. The beginning of knitting is indicated in the diagram by an asterisk, the end of knitting the first section of 5 rows is indicated by a circle divided in half.

Attach the thread to the end of the first row of single crochets, this place is indicated by a circle with a cross inside. Knit 3 rows of single crochets on 3 sides of the collar and continue knitting the binding according to the pattern, adding stitches at turns.

Having finished the last row of the picot binding, tie the collar along the neck line with single crochets through a chain loop. The end of knitting is indicated by a black square.

Burdock Collar

The openwork collar from the Valya-Valentina magazine for 2007 is crocheted from 70g of “Iris” yarn with a crochet number 1.25-1.5. Collar width 15 cm.

Start knitting with a chain of 200 chain stitches (13 repeats of 15 chain stitches + 2 chain stitches for symmetry + 3 chain stitches for lifting). Next, knitting continues according to the pattern.

The finished collar needs to be starched, straightened and left to dry completely.

Richelieu collar

An openwork collar with voluminous “popcorn” elements from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 1.25. Collar width 7.5 cm.

The collar begins to be knitted with a chain of air loops and then knitted according to the pattern. The beginning of the binding is indicated by a crossed out circle, the end by a black square.

Collar Rings

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 7 cm.

The collar is knitted in the transverse direction according to the principle of continuous knitting. The beginning of knitting is indicated in the diagram with an asterisk.

Having knitted a collar of the required length, without cutting the thread, tie the collar along the neck line. The end point of knitting is indicated by a black square.

Collar Anita

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 1.25. Collar width 8.5 cm.

The collar begins to be knitted with a chain of air loops of the required length and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk. Since the rapport of the collar is small, the length of the neck line can be made to almost any length.

Finally, without cutting the thread, tie the collar in the round with one row of shamrock binding. The end point of knitting is indicated by a black square.

Bird cherry collar

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 7.5 cm.

The collar begins to be knitted with a chain of 196 air loops (excluding lifting loops) - 13 repeats of 15 loops each + 1 loop for symmetry. The beginning of knitting is indicated in the diagram with an asterisk.

Next, 11 rows are knitted according to the pattern, including a row with triple stitches. After this, a row of circular binding is knitted, making a row along the edge of the collar with 4 stitches knitted together. The beginning and end of the circular row of binding are indicated in the diagram by a black square.

P.S. The diagram does not show a button loop, which can be added when knitting a binding.

Collar Openwork luxury

An unusually beautiful openwork collar from the Valya-Valentina magazine for 2007 is crocheted from thin cotton yarn using crochet No. 1. Collar width 16 cm.

The collar is assembled from dense leaves, small floral motifs and a stripe along the neck line.

Start making the collar by knitting 6 dense leaves. After this, around each leaf you need to knit a frame of 8 round motifs, which are attached to the leaf and connected to each other during the knitting process.

The result is an openwork medallion, which is lined with additional arches, tied with single crochets, between the top motifs. The next medallion is attached to the previous one with “pico” motifs and additional arches.

Once all 6 medallions are tied and connected, tie a lace strip along the neck line.

Starch the finished collar, stretch it to size and leave until dry.

Sakura collar

The free edges of the Bruges braid are tied and laces made of air loops with trefoils at the ends are attached.

Collar - flounce for a round neckline

Puffy trim for a crew neck from an old Chinese magazine. Unfortunately, I was not able to decipher the details, but from the photograph it is clear that the shuttlecock is crocheted from cotton threads with a thin hook.
Knit a small sample from the first 2 rows and use it to calculate the required number of loops around the perimeter of the neckline. The trim can be worked in the round or clasped at the back if desired.
After knitting the flounce collar, be sure to starch it hard and dry it, stretching the edges.

Small openwork collar

A small openwork collar from a Portuguese magazine is crocheted with 20g cotton yarn using No. 1.25 crochet. Collar width 4.5cm, neckline length 44cm.
They begin to knit such a collar with a chain of air loops. To avoid the hassle of counting stitches, cast on a chain from a separate thread. You can pick up the missing loops or unravel the extra ones.
Pay attention to the long stitches in the diagram, these are stitches with 4 crochets. The finished collar is tied on all sides with single crochets.

Stand collar Sea blue

A cute and easy-to-make stand, knitted with lush columns, from the Pink Rose Crochet online blog.
Unfortunately, I couldn’t find a detailed description, but from the photo you can see that the collar is knitted from fairly thick cotton yarn.
A matching satin ribbon threaded along the first row of posts makes it possible to adjust the tightness of the stand-up collar to the neck.
Knitted from shiny yarn and decorated with beads, this stand will be a great addition to an evening outfit.

Large collar with voluminous flowers

The collar from the Let`s Knit Series magazine is crocheted with size 1.5 from thin cotton threads. Collar width 12 cm, neck length 45 cm.
The collar is assembled from 11 pentagonal and 12 hexagonal motifs with three-dimensional flowers in the center of each motif. The width of the pentagonal motif is 7 cm, the size of the hexagonal motif is 7.5 x 8.5 cm.
The last 4 rows of motifs of both types are connected by arches of air loops with “picot”, so the beginning of the rows is shifted. The transition to a new row is made through half-columns (connecting columns) knitted along the chain of the previous row.
The motifs are connected to each other during knitting of the last row. The connection points are shown in the diagram.
The collected motifs are tied in 4 circular rows, placing the neck line up to 45 cm with the binding.

Collar Romance

The elegant collar I found on the Pink Rose Crochet online blog is crocheted from cotton yarn with size 2.5.
The collar is knitted crosswise, which makes it possible to adjust its length during knitting. Start knitting with a chain of 17 air loops + 5 lifting loops and then knit according to the pattern (the number of rows in the finished collar should be a multiple of 6). The beginning of knitting is indicated in the diagram by the letter A.
The knitting pattern uses crossed stitches with one crochet. You can watch a video tutorial on how to knit this element here
Upon reaching the desired length, perform 2 rows of binding, forming corners.
The ties are knitted in one strip along with the neckline trim - 3 rows of single crochets behind the back wall. When casting on stitches along the neckline of the collar, adjust it so that the collar fits better.

Collar Isabel

The openwork collar from the Magic Crochet magazine is crocheted from thin cotton threads with a size 1.5 crochet hook. Collar width 7 cm, neckline length 37 cm.
Start knitting with a chain of 151 air loops and then knit 8 rows according to the pattern. The 9th row is knitted in the round, having finished knitting along the flap of the collar, the narrow sides and the neck line are tied. The black triangle in the diagram marks the end point of knitting.
Place the finished collar on a horizontal surface according to size, moisten it and let it dry completely. Tie a chain of chain stitches and thread it through the edge of the neckline trim as a tie.

Lace trim for round neckline

The lace trim for the round neckline from the Puntillas Aplicadas magazine is crocheted from cotton yarn No. 2.5.
Before knitting, it is recommended to knit a sample and use it to calculate the required number of air loops and repeats that need to be knitted.
Even though the diagram shows a corner in the center, the trim falls on the round cutout. If the neckline is closer to square with rounded corners, then this pattern will not work.

Collar Fevronia

The openwork collar from the magazine “Valya-Valentina” for 2008 is crocheted from 25g of cotton yarn “Snezhinka” with crochet No. 0.75. Collar width 8 cm.
Start knitting the collar with a chain of 315 chain stitches (13 repeats of 24 loops + 3 loops for symmetry) and then knit 14 rows according to the pattern. Cut the thread.
Attach the thread to the base of the collar and knit 1 row of the binding according to the pattern.
Knit a row of single crochets along the neck line, and on the remaining 3 sides the 2nd row according to the piping pattern.
Starch the finished collar, arrange it according to size and leave until completely dry.

Openwork collar Buttercups

The openwork collar from the Valya-Valentina magazine is crocheted from cotton yarn No. 0.8. Collar width 7 cm.
Start knitting a collar with a chain of air loops at the rate of 1 repeat = 10 loops + 1 loop for symmetry. Next, knit 10 rows according to the pattern.
Starch the finished collar, arrange it according to size and leave until completely dry.

Collar Diana

A small collar from Phildar magazine is crocheted using cotton yarn using size 1.75 crochet.
Start knitting a collar with a chain of 142 chain stitches (6 repeats of 20 loops + 2 loops for symmetry) and then knit 11 rows according to the pattern and cut the thread.
Having attached the thread to the right side of the neck, tie the collar on 3 sides with single crochets with a picot.
The finished collar needs to be starched, arranged according to size and left to dry completely.

Lace collar with back closure

The original model of a knitted collar from Fashion Magazine No. 468 is crocheted with a hook No. 1.25 from 50 g of fine cotton yarn.
Knitting a collar begins with a central motif, from which a strip with small pineapples of the required length is knitted on both sides.
Tie the finished collar around the perimeter with picot fans. Make hinged loops at the back on one half, and sew buttons on the other.

Collar Karagoz

The openwork collar from the Magic Crochet magazine is crocheted from thin cotton yarn with size 1.25. Collar width 5 cm, neckline length 41 cm.
Start knitting with a chain of 184 air loops and then knit according to the pattern.
This symbol indicates a double crochet - pull a loop from under each of the adjacent arches and knit all 3 loops on the hook together.

You can watch a video tutorial on how to knit a popcorn element here.

Knitted collar Jadwiga

The lace collar from Fashion Crochet magazine is crocheted No. 1.4 from thin cotton threads. Collar width 8 cm, neck length 39 cm.

Start knitting a collar with a chain of 155 air loops and then knit 13 rows according to the pattern. After this, without cutting the thread, I tie the narrow sides of the collar and the neck line with a series of single crochets.

Tie or twist the lace as ties and sew tassels on the ends.

Collar Iedidi

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 9.5 cm.

The collar begins to be knitted with a chain of air loops of the desired length, the number of loops should be a multiple of 3 + 1 loop for symmetry (excluding lifting loops) and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk.

The main part of the collar is knitted with “Solomon loops,” which are indicated in the diagram by an eyelet with a cross. You can watch a video tutorial on knitting Solomon loops here

After finishing knitting the collar, tie the narrow sides and the neckline with one row of binding according to the pattern. The beginning of the binding coincides with the starting point of knitting.

Collar Vintage

The knitted collar from the magazine “Knitted Finishing” No. 7 2013 is made with crochet No. 2.5 from “Tenderness” yarn (47% cotton, 53% viscose; length 400 m/100 g). Collar width 10 cm.

Knitting a collar begins with a chain of 113 chain stitches and is then knitted according to pattern 1. Having finished knitting, and without cutting the thread, tie the narrow sides of the collar and the neck line, alternating 1 single crochet and 1 double crochet.

According to scheme 2, knit a flower, sew a pin on the inside and use it as a clasp.

Collar Svetlana

The openwork collar from the Valya-Valentina magazine for 2007 is crocheted from thin cotton yarn with crochet No. 1. Collar width 9 cm.

Start knitting with a chain of air loops at the rate of 1 repeat = 9 loops + 3 loops for symmetry + 4 lifting loops and then knit according to the pattern.

After finishing knitting the 8th row, without tearing off the thread, tie the collar along the narrow sides and the neck line with double crochets. The direction of the strapping is shown in the diagram by arrows.

Starch the finished collar, stretch it to size and leave until dry.

Collar Bells

Openwork collar from Valya-Valentina magazine for 2007. knitted from cotton yarn “Mak” with crochet number 1.5. Collar width 14 cm.

Begin knitting a collar with a chain of 156 chain stitches (25 repeats of 6 chain stitches + 3 loops for symmetry + 3 lifting loops). Next, knit 8 rows according to the pattern and, without tearing off the thread, tie the collar in a circle in a “crawfish step.”

The finished collar needs to be starched, straightened and left to dry completely.

Collar Scales

An interesting wavy collar from an Asian magazine is crocheted from 70g cotton yarn with size 2.5 crochet. Collar width 9.5 cm.
The collar is knitted crosswise in the form of a straight strip with scallops, the length of the collar is 76 cm.
On a chain of 25 air loops, knit the 1st row of arches from 5 air loops, adding “picot” to the last 2 arches. Next, knit 127 rows or 21 scallops according to the pattern. When knitting the 4th and 6th rows, attach the last arch to the side of the “scale” of the previous row. Knit 2 rows of binding on the narrow side of the collar and tie the straight edge with arches of air loops with a picot in the middle of each arch. Without cutting the thread, sew 2 rows of binding on the second narrow side of the collar.
Lay out the collar according to size, moisten it and let it dry completely.
Pull a thin satin ribbon through the tie, slightly moving away from the straight edge of the collar.

Collar Two butterflies

An elegant collar from the Lithuanian magazine Pacios is crocheted from 70-100 g of silky polyester yarn with lurex with crochet size 3-3.5.
The collar consists of 2 motifs in the form of large butterflies, connected at the back and front by the ends of the wings.
Unfortunately, I couldn't find better quality diagrams. Therefore, please note that at the beginning of the pineapples on the wings, stitches with 4 crochets are knitted. The remaining columns in the diagram are with 2 and 1 crochets; they are more visible.
This cape collar, knitted from silver or gold yarn with a lot of lurex, will be a wonderful addition to an open evening dress.

Two-tier collar

The original collar from the Japanese magazine French Girly Crochet Collars and Tippets is crocheted No. 2 from 20 g of yarn. Collar width 6 cm, neckline length 44 cm.
The collar begins to be knitted with a chain of 162 air loops (19 repeats of 8 loops + 1 loop for symmetry + 9 loops for a hinged loop for a button), on which 7 rows are knitted (the lower part of the collar) according to the pattern.
After this, 2 rows of the upper part and 3 rows of the neckline are knitted on the initial chain in the other direction from the initial chain. When moving to the 3rd row of the binding, secure the tail of the initial chain, left under the hinged loop. The starting points of knitting are indicated in the diagram by light arrows, and the ending points of knitting are indicated by black arrows.

The collar is fastened with a round bead tied with collar yarn.

Collar Spikelets

The openwork collar from the Valya-Valentina magazine for 2008 is crocheted from 30g of cotton yarn using No. 1 crochet. Collar width 11 cm.
Start knitting with a chain of 281 air loops (18 repeats of 15 loops + 10 loops) and then knit according to the pattern.
Starch the finished collar, stretch it to size and leave until dry.

Collar Buds

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads No. 0.75. Collar width 9 cm.
The collar begins to be knitted with a chain of 170 air loops (including 2 lifting loops) and then knitted according to the pattern. The beginning of knitting is indicated in the diagram with an asterisk and arrow.
The last row of knitting is continued along the narrow side and a buttonhole is knitted. The second narrow edge is tied separately, starting from the neckline (the area between the circles in the diagram).
The scheme uses 2 unusual elements.

Make 5 yarn overs and knit the unknitted stitch, leaving 2 loops on the hook. Make 2 yarn overs, enter the first stitch at the level of the 3rd yarn over and tie the unknitted stitch, 3 loops on the hook. Knit 2 more unknitted double crochets in the same place as the first. Knit 5 stitches together.
Make 3 yarn overs, knit one. Make 2 more uncrocheted single crochet stitches. There will be 2 first yarn overs and 3 loops on the hook, knit these 3 loops together and work the remaining yarn overs.

Collar with tassels

The openwork collar from the Valya-Valentina magazine is crocheted from cotton threads using No. 1 crochet. Collar width without tassels is 4 cm.
Start knitting the collar with a strip of 17 flowers, knitted with continuous knitting. Close a chain of 7 chain stitches into a ring, 7 chain stitches, 2 double crochets in the 4th loop of the initial chain, 7 chain stitches, 2 single crochets in the 4th loop of the starting chain, 15 chain loops (transition to the next flower), connecting stitch in the 7th loop from the hook. Continue knitting the top sides of the flowers. Knit the last flower entirely and then knit the bottom side of the strip. After this, tie the flowers with single crochets.
Knit 2 rows of circular binding according to the pattern and a row of binding along the neckline.
Along the flap side of the collar, knit a strip of ribbon lace, the knitting direction is shown in the diagram. Make the ties to the required length. Decorate the collar teeth and the ends of the ties with tassels.

Marietta Collar

A collar using the Bruges lace technique from Fashion Magazine (Spetsvyausk. Crochet. Embroidery) is crocheted with size 1.5 from 50 g of Snowflake thread.
Depending on the desired length of the collar, knit 11-15 separate internal motifs according to scheme 1, connecting them to each other. After this, tie the binding with Bruges braid along the outer edge of the collar.
According to pattern 2, knit the upper part of the collar, place it on the lower part, aligning it with the neckline, and tie it with 2 rows of single crochets, connecting both parts.
Starch the finished collar, arrange it according to size and leave until completely dry.

Openwork dome collar

A collar assembled from floral motifs, from Valya Valentina magazine for 2007. The collar is crocheted from 40g bobbin thread No. 10 with crochet No. 1.25. Collar width 10cm.
The collar consists of motifs. Each motif begins to be knitted with a chain of 10 chain stitches connected into a ring. On this ring, 3 rows are knitted in a circle. In the 3rd row, a connection is made with the previous motif. The connection points of the motifs are indicated by arrows in the diagram.
When all the motifs are knitted and connected, 1 row is knitted along the neck line with a separate thread (dark green in the diagram). With a new thread, 1 row along the narrow sides of the collar and neckline, 1 row of binding along the entire perimeter of the collar and 2 rows along the neckline.

Collar Party

The openwork collar from the Magic Crochet magazine is crocheted using thin cotton threads using No. 1 crochet. Collar width 6 cm, neckline length 37 cm.
The collar is easy to make and accessible even to beginner knitters. Start knitting with a chain of 210 air loops and then knit 11 rows according to the pattern. The expansion of the collar occurs due to an increase in the number of air loops in the constrictions between pairs of double crochets.
Place the finished collar on a horizontal surface according to size. Moisten and let dry completely. If desired, the collar can be lightly starched.

Collar Marianna

The openwork collar from the Valya-Valentina magazine for 2004 is crocheted from “Iris” yarn using crochet No. 1. Collar width 12 cm.
Begin knitting with a chain of air loops at the rate of 1 repeat 12 ch. + 11 v.p. for symmetry + 3 ch. rise + 1 ch). Next, knitting continues according to the pattern. There are 13 repeats in the collar in the photo, that is, 171 loops.
The finished collar needs to be starched, stretched to size and left to dry completely.

Pineapple collar with lush columns

The romantic openwork collar from Valya-Valentina magazine No. 24/2011 is crocheted from 40g of “Iris” yarn using crochet No. 0.9. Collar width 13 cm, length 66 cm.
Begin knitting with a chain of 199 chain stitches (16 repeats of 12 chain stitches + 1 chain stitch for symmetry + 3 chain stitches for lifting + 3 chain stitches). Next, knitting continues according to the pattern. For ease of use, odd rows are indicated in the diagram in blue, and even rows are indicated in black.
The finished collar needs to be starched, straightened and left to dry completely.

Collar Graceful

A small openwork collar from the magazine “Valya-Valentina” for 2004 is crocheted from Iris yarn with size 1.5. Collar width 7 cm.
Begin knitting a collar with a chain of air loops at the rate of 1 repeat = 12 loops + 4 loops for symmetry + 3 lifting loops + 2 loops. Next, knit 8 rows according to the pattern and, without cutting the thread, tie the collar along the narrow sides and neckline with single crochets and arches of 3 air loops.
If you plan to fasten the collar with a button, then form an air loop when tying the collar. Or thread a narrow satin ribbon tie between the posts of the 1st row.

Sirloin Collar Spiders

The loin collar from Asahi Crochet Lace 2013 is crocheted with size 2 using 25g cotton yarn. Collar width 9.5 cm, neckline length 45 cm.
Knitting a collar begins with a chain of 160 air loops, on which 7 fillet segments with “spiders” are knitted. 8 rows of the collar are knitted in a single fabric, and rows from the 9th to the 15th are knitted on each segment separately.
Having knitted all the segments, use a separate thread to tie the neck line with single crochets and knit a buttonhole.
Please note that in the 11th and 13th rows the “popcorn” elements are knitted.

Openwork collar Isabella

An elegant openwork collar from Asahi Crochet Lace magazine is crocheted from fine cotton yarn using a size 2.25 crochet hook. Collar width 8 cm, neckline length 47 cm.
Start knitting a collar with a chain of 145 chain stitches (9 repeats of 16 loops + 1 loop for symmetry) and then knit 11 rows according to the pattern.
The collar pattern uses a beautiful popcorn design.
Finally, the collar is tied along the neckline with single crochets, skipping every 4th chain stitch of the initial chain. Don't forget to make a slip stitch for the button at the beginning of the binding row.
Lay out the finished collar according to size, moisten it and let it dry completely. Sew on a button.

Collar Pineapple medallions

The large collar from Fashion Magazine No. 439 is crocheted No. 1 using 200 g of cotton yarn.
On a chain of air loops, knit 8 repeats according to the pattern. After separating the rapports, each corner is knitted separately.
Tie the finished collar in a circular row of single crochets, starch and iron, giving the corners the desired shape.

Collar Flowers

The delicate collar from the Magic Crochet magazine 12/1992 is crocheted from thin cotton threads with a No. 0.7 crochet hook. Collar width 4.5 cm, neckline length 45 cm.
They start knitting a collar with Bruges braid; 93 rows are knitted with it. Next, the main pattern with flowers from lush columns is knitted on this chain. Please note that the flowers are formed in two rows, the lower three petals in one row and the upper three in the next.
The finished collar needs to be starched, straightened and left to dry completely. Thread a narrow satin ribbon through the upper arms of the Bruges braid.

Large collar of openwork motifs

The collar from the magazine Wear & small interior lace NV 70174 2013 is crocheted with size 1.5 from 90 g of yarn. Collar width 20 cm, length 126 cm, along the neck line the collar is gathered with a drawstring.
The collar is assembled from 28 motifs with a diameter of 9 cm, which are connected when knitting the last row. The gaps between the motifs are filled with small flower motifs.
The assembled strip of motifs is tied along the outer edge with 3 rows of arches, and along the inner edge (neck line) with 9 rows. The rows of binding in the diagram are highlighted in a darker color.
For a tie cord 120 cm long, on a chain of 420 air loops, tie a series of connecting posts. Thread the finished lace-tie into the arches of the penultimate row of the binding.

Openwork collar Spikelets

A chic openwork collar from a Japanese magazine is crocheted from 65g cotton yarn with size 2.25.
Collar width 18 cm, neck length 64 cm.
Begin knitting with a chain of 160 air loops, 10 loops for each repeat.
Having finished knitting, tie a chain of chain stitches with single crochets with a picot.

Collar with mesh and voluminous flowers

A collar from an Asian magazine is crocheted from 100 g of yarn using crochet number 2. The width of the collar is 16.5 cm, the length along the neck line is 44 cm.
They begin knitting a collar with a chain of 156 air loops, on which 14 rows are knitted with a complex mesh with “picot”. The additions necessary to widen the collar are indicated in the diagram in a darker color.
After knitting the main part of the collar, perform 2 circular rows of binding.
Knit 28 small and 29 large flowers. Attach large flowers along the flap of the collar, and embroider the mesh with small flowers according to the pattern.

Large collar with lush columns

The Aiamu Olive Magazine Collar is crocheted in size 2.5 using 170g section-dyed yarn (length 82m/25g). The width of the collar without fringe is 17 cm.
Knitting density: 26.5 stitches and 16 rows in a 10 x 10 cm square.
Begin knitting a collar with a chain of 169 air loops (excluding lifting loops). Mark the 45th, 85th and 125th loops on the chain; along these loops you will need to widen the collar.
Having knitted 27 rows according to the pattern, tie a row of double crochets through a chain loop along the narrow side of the collar and cut the thread.
Carry out the same row on the other narrow side, joining the thread at the neck line.
After this, without cutting the thread, knit a row of fringe binding along the outer edge of the collar and a row of single crochets with picots along the other 3 sides.
Tie a lace 84 cm long and thread it between the double crochets of the 1st row.
It is proposed to use a knitted flower brooch as a collar decoration (there is no flower pattern in the magazine). In addition, you can wear a collar in different ways - with draping ends and turning them over the shoulder.

Collar Elegance

An elegant collar from a Spanish magazine is crocheted using thin cotton thread No. 1.25. Collar width 7.5cm, neckline length 36cm.
The collar begins to be knitted from the line where the scallops join. 14 cm (7 scallops) are knitted in one direction, and 22 cm (11 scallops) in the other direction.
At the same time, the flying part of the collar expands due to scallops, and the upper part forms a small stand.
Since the original Spanish diagram is not very readable, I am using a version of this diagram from Fashion Magazine No. 462.
Using the same pattern, you can knit a symmetrical collar, making 9 scallops (18cm) on each side.

Openwork Lace Collar

Openwork collar from the website of the Japanese company Clover. The collar is crocheted from 30 g of yarn with a crochet number 2.25. The maximum width of the collar is 11 cm, length along the neck line is 57 cm.
Begin knitting a collar with a chain of 137 air loops (34 repeats of 4 air loops + 1 loop for symmetry, lifting loops are not included in this count). Next, knit the middle of the collar from 12 rows according to the pattern.
Next, perform 4 rows of binding, starting from the neck. Without tearing off the thread, knit one tie, tie the collar along the neckline with one row of single crochets with a picot and knit a second tie.

Collar Monastic windows

The openwork collar from the Valya-Valentina magazine for 2007 is crocheted from 30g of raw cotton yarn with a No. 1.25 crochet hook. Collar width 11cm.
Start knitting a collar with a chain of 196 chain stitches (18 repeats of 11 loops + 2 loops for symmetry + 3 lifting loops) and then knit 11 rows according to the pattern.
The finished collar needs to be starched, straightened to size and left to dry completely.

Openwork collar Air

The openwork collar from the Spanish magazine MYM Cuellos is crocheted from thin cotton threads with size 0.75. Collar width 7.5 cm.
The collar begins to be knitted with a chain of air loops and then knitted according to the pattern up to the penultimate row inclusive. The beginning of knitting is indicated in the diagram with an asterisk.
Without breaking the thread, continue knitting the penultimate row, tying the narrow sides of the collar and the neckline. Knit the last row in the round. The end of the knitting of the binding is indicated in the diagram with a black square.

Carolina collar

A large openwork collar from the magazine Wear & small interior lace NV 70174 is crocheted with size 1.5 from 60 g of yarn. Collar width 21.5 cm, neck length 58 cm.

Start knitting a collar with a chain of 200 chain stitches (33 repeats of 6 loops + 2 loops for symmetry) and then knit 28 rows according to the pattern. Please note that when knitting the last row, each scallop is knitted separately with 2 additional rows. After this, without cutting the thread, tie the narrow sides of the collar and neckline with a series of single crochets with a picot.

For the ties, tie 2 30 cm long laces with trefoils at the ends and attach them to the places marked with gray dots in the diagram.

Openwork collar

Yarn "Maxi" consumption about 50 g, hook 1. A very convenient knitting pattern, the collar is knitted lengthwise, you can easily calculate the size and number of motifs.

Based on materials from the site: vorotni4ok.ru

Peacock collar