The patterns on the headband are warm. Women's headband with knitting needles

A knitted headband for a girl is a very convenient accessory that does not go out of fashion. This year, 2018, it has changed a little: pompoms, strings, and sometimes funny ears have been added to it. But in general - she remained a warmer for the ears.
A knitted headband made of wool or acrylic for a girl - there is nothing complicated here. Even if you rarely take knitting needles in your hands, you can disassemble our patterns and knit a headband using them in one evening. For beginners, such work is also a good option to try your hand and knit a cool thing with your own hands!

To knit such a headband with knitting needles for your girl, you will need thick yarn (when buying yarn, pay attention to the recommended size of the needles), in this work we use knitting needles with a thickness of 8 mm. Knitting density: 10 loops / 15 rows = 10/10 cm. We knit both the snood and the bandage on ordinary knitting needles. Snood at the end we sew to the middle of the product. We knit a bandage with a garter stitch (one facial) with a pattern “spikelet of 8 loops”. Snood is knitted with the wrong side of the stitch with the same “spikelet” pattern. The knitted headband and snood are suitable for a girl 5-7 years old, height 104/116 cm.

The table is needed in order to determine the size of the bandage. The size of the bandage corresponds to the girth of the head.

So, we calculate the size of the bandage for a girl of 5-7 years old: 52-54 cm - 3 cm (since the yarn is stretched). So the size of the strip is 49-51cm. The yarn is very voluminous, Roving Bernat.

Knitting density on knitting needles 8 mm. - 10 loops / 15 rows corresponds to 10/10 cm.

The length of the strip is 49-51 cm, the width will be 16 loops (about 16 cm). It will be better if you, for sure, complete 5 rows of the “spikelet” pattern with your threads in order to calculate how many times this detail is repeated. At the beginning and at the end of the strip, we perform a garter stitch, and then move on to the “spikelet”. Abbreviations: front - faces., purl - out., row - p., loop - p., edge - edge.

Scheme of the “spikelet” pattern - the braids intersect in the opposite direction.

For work you will need:

Spokes 8 mm thick.
Additional spoke.
Yarn Roving Bernat (80% acrylic 20% wool, 110 m. 100g.) - 2 skeins per strip and snood.
Needle, scissors.
A piece of cardboard for making a pom-pom.
Centimeter.

We collect 4 loops on the knitting needles.

1st p.: Kromoch., 3 persons.
2nd p: 5 persons., Kromoch. do not knit (in each subsequent p. we add 2 p. in the middle of the row).
3rd p.: 7 persons., Kromoch. do not knit (in order to get a smooth edge of the product, at the end of the river, we remove the edge without knitting). Next R. We start with the execution of faces. P.
4th p.: 9 persons, edge.

So we knit until there are 16 sts on the knitting needles. We turn the work. Next, we introduce a pattern (see diagram).

1st. p .: hem., 3 out., 8 persons., 3 out, hem. do not knit - just transfer to the left knitting needle.
2nd p: persons., 14 out., Kromoch. do not knit
3rd p.: persons., 3 out., 8 persons., 3 out., chrome. do not knit.
4th p.: 1 person., 14 out., chrome. skip.
5th p.: persons., 3 out., 4 p. cross to the right: (remove 2 p. on the auxiliary knitting needle and leave at work, 2 persons., 2 persons. knit with auxiliary knitting needles), 4 p. cross to the left: (we remove 2 p. on the auxiliary sp. and leave before work, 2 persons., 2 persons. from the auxiliary knitting needles., 3 out., 1 edge.

Then repeat these 5 rows again. And so on to the place where you need to reduce the work in a mirror order.

If the bandage turns out to be narrow, knit not up to 16, but up to a larger number of loops, adding 2 sts in a row. When you reach the desired width - then enter the "spikelet".

Our knitting stripes continues. Let's make a cord. To do this, you need to dial 2 loops on the knitting needles, knit their faces., Then, without turning the work, transfer the loops from the right to the left knitting needle, leaving the working thread behind. We knit 2 persons. We do not turn the work, we continue to knit 2 persons. and again shoot them on the left knitting needle. We make a cord of the desired length (you will need 3 such cords in total - 2 for a bandage and 1 for a snood).

Then you need to make 4 pompoms using a piece of cardboard.

The size of a children's snood is usually calculated as follows: the size of the head plus 3 cm. Therefore, the width of the snood will be 55-57 cm. Of course, if it is possible to estimate the ideal width of the snood with a centimeter, this must be done. You need to remember one thing: the child’s head should freely pass through the snood in 1 turn. The height of the children's snood will be 30 cm.

We collect on knitting needles with a thickness of 8 mm. 60 loops. After the snood is tied, we will sew the side seam halfway on the right side (that is, we will sew the top 15 cm.)

1st p.: hem., 58 p. Purl, hem.
2nd p .: chrome., 58 front, edge.
Z-th row: hem., 38 purl p., 16 p. of the “spikelet” pattern, 4 out. p., kromoch.

Headband with cat ears for a girl

Knitted headbands for girls are an opportunity to knit something unusual, fashionable. Such an original heating pad with cat ears is usually crocheted, but who or what prevents us from knitting it.

The strip can be tied with any viscous, for example, Polish or faceted elastic, and so on. We will do this with a “mess”, the whole secret of knitting is that we knit purl stitches over the front ones, and vice versa.

The ears are knitted separately, they consist of two parts - the inner and outer ear. The inner ear can be cut out of felt, or it can be knitted with light threads and sewn on. For this work, you need cotton threads of the “Violet” type in 2 threads.

We measure the girl's head or look at the previous size table. We make a “probe” 10/10 cm. Let’s see how many stitches we got in 1 cm. a girl of 3 years old - 50 cm long. Width will be 13 cm.

The lower part of the cat's ears - 12 cm.

We collect on knitting needles with a thickness of 3 mm. 3 loops and begin to make a bandage Cat with a pattern “rice knit. At the end and at the beginning of each r. add 1 p. Total - add 2 p. in each p. So we do about 10 r. When the width of the bandage becomes 13 cm, then knit without additions. Calculate the middle of the work (25 cm), tied up to this point and knit in the opposite direction again 25 cm. We finish exactly the same as we started - 3 p.

Next, we collect 25 p. on the knitting needles and begin to knit the ears, at the end of each p. knit 2 p. together. We make the ears in this way until 1 st remains on the knitting needle. For the inner ears, dial not 25, but 23 sts of a different color.

White bandage and snood from yarn with alpaca. Head size - 50/52 - 54 - 56 cm. For the age of 3-5 years, 6-9 years, and 10/12 years. Drops Air yarn (69% alpaca, 24% synthetics, 7% wool. 150 m / 50 gr. 1 skein will go to the headband.

Knitting needles 5 mm thick. Knitting density - 17 p. / 22 p. = 10/10 cm.

Cast on 18 sts on 5 mm needles. See diagram 1:

1st p.: 5 persons., 2 persons together., 1 persons., nakid, 2 out., nakid, 1 persons., 2 persons together. behind the back wall, 5 persons.
2nd p.: 2 persons, 6 out., 2 persons., 6 out., 2 persons.
3rd p.: 4 persons., 2 vm. persons, 1 persons., nakid, 1 persons., 2 out., 1 persons., nakid, 1 persons., 2 persons together. behind the back wall, 4 persons.
4th p.: 2 persons., 6 out., 2 persons., 6 out., 2 persons.
And so on, according to scheme A. 1

Attention! In even rows, knit the opposite! (where persons are indicated. - read out., and vice versa.)

Scheme of knitting bandage and snood.

Continue until you knit 42-44-46 cm. Cast off all sts, sew side cut.

Snood for girls

Snood for a girl of the same age. Snood size 42/46/49 cm. Product height 14/16/18 cm.

In the mid-nineties of the last century, knitted headbands were extremely fashionable, which were loved by many women, and were worn on the head. Then there was a long period of time when almost no one wore or knitted bandages on their heads.

Due to the cyclical nature of fashion trends, bandages have returned again today, and many people like them even more than twenty years ago. That is why each interesting pattern, according to which an original and spectacular headband is knitted, is very popular with needlewomen.

This stylish and unusual headdress is very good in the cold season, when it protects us from wind and frost. It is especially appreciated by those of us who do not suit or do not like hats. Such girls use a variety of knitting bandages, which are an excellent alternative to a regular hat for them. They protect the head from the cold, and the hair from destruction. We offer you some options that you will see in the attached photos.

The beauty and advantage of such a headdress is that it can be knitted with almost all known patterns. If the design of the bandage or its pattern is quite complex and voluminous, then it is extremely original and stylish in itself, as in these photos. But when it is tied with the simplest relief, it is often decorated with brooches, flowers, or bows. It is these decorative ornaments that will make it stylish and elegant.

Knitting a headband should begin with choosing the color of the yarn, the desired style, patterns, and the number of knitting needles. If you have chosen a pattern with a light and loose knit, then you need to purchase knitting needles of a larger diameter. A dense and rigid bandage should be made with small diameter needles.

When all the above things are prepared, you can start needlework. But first you need to correctly take the measurement, measuring the head around the circumference. When taking measurements, do not tighten, but do not loosen the meter too much.

Next, determine the density of knitting vertically and horizontally by knitting a small sample measuring 10x10 centimeters (cm) with a pre-selected pattern. After the calculations, you can make a set of loops (P) on ordinary or circular knitting needles. Often such knitting is done on five knitting needles. In this version, you will get a model without a seam.

Master class on creating a bandage with an overlap

Consider knitting with such a stylish and spectacular headband, associated with the overlap of two separate strips.

Headband with "Spike" pattern in the center

To knit such a beautiful and stylish headband, you will need one hundred grams of woolen or mixed yarn, as well as number four knitting needles.

The knitting density is nineteen P and twenty-five P when knitting with the front stitch of a sample of ten by ten cm. For the Ear pattern, there is a special pattern in the lesson that must be followed.

At the beginning of the needlework, we will make a set of thirty-three P on knitting needles No. 4, without tightening the loops. To make the headband voluminous, it is necessary to knit with a thread folded twice.
Let's start knitting a bandage, performing the first two Rs with a garter stitch, and then move on to making the Kolos pattern, which has thirteen Ps.
We will place this relief in the center, and along the edges of it we will continue to knit a garter stitch. In this case, the central thirteen units will be occupied by the Ear pattern, and on the sides of it, ten units will be knitted with a garter stitch.
This needlework must be continued until the length of the headband reaches fifty-three cm.
At the end of the canvas, the last two Rs must be knitted with a garter stitch, as at the very beginning, and then close all the Ps of the last R.

Video tutorials on knitting bandages

Accessory Design Ideas and Knitting Patterns

Elizabeth Rumyantseva

For diligence and art there is nothing impossible.

Content

Have you ever wanted to knit a headband with knitting needles? Needlework and knitting were valued at all times. A thing created by one's own hands looks more elegant, it is ideal for a person, because the item was knitted strictly according to his standards. A knitted headband with knitting needles is a great accessory that will fit into any wardrobe, protect from the wind in bad weather.

How to knit a headband for a girl

A headband for a girl with knitting needles often knits. The thing is well suited for autumn or spring weather, when it is already hot to walk in a hat, and the wind can blow out your ears, and the likelihood of getting sick becomes real. Another disadvantage of the hat is that the forehead often itches, not everyone looks good in it. If you make a bandage with knitting needles on your head in two layers, then you can safely wear it even in winter! In cold weather, the head will remain warm, and the hairstyle will not deteriorate: the hair will lie neatly, the appearance will not spoil anything.

What is needed for work

Before knitting, you need to seriously prepare: you need to select knitting needles in advance. The density of the future dressing depends on their thickness. It is best to take knitting needles four. If you take a thinner tool, then the loops will be closer to each other, the finished product will not stretch well, it will fit too tightly to the head. And on thick ones, the bandage will be too light, you will have to sew two layers, or the product will not warm your head.

It is necessary to choose the yarn from which the headband will be made with knitting needles. The stores offer a large selection of materials: you can find any thickness, type, color. It is advisable to choose the shade that will be best combined with outerwear. To determine what material to knit from, you need to decide what time of the year this accessory will be worn. For winter, you should choose wool, it will warm well, and acrylic is suitable for autumn and spring. It is also necessary to take pins, threads with needles.

Which pattern to choose

On the Internet, you can find several ready-made options for headbands with knitting needles: they are suitable for both girls and women. All products look elegant and interesting, they can always be decorated with a beautiful brooch or an unusual pattern. What type of accessory to choose depends only on your taste and ability to knit. The more complex the drawing, the more experience the craftswoman should have.

Step by step knitting master class

If you follow all the instructions according to the diagram below, you will get a bandage with knitting needles on your head, as in the photo. You can choose any color for the product, you can even play with the range, take two different shades, then the finished product will look more interesting. The detailed description below will tell you how to make a stylish attribute of your wardrobe. Tie a thing that can become the main feature of your image.

Pigtail headband

It is necessary to take yarn (a meter of wool weighs about 100 grams), knitting needles. Operating procedure:

Cast on loops. Their number affects the width of the future product. The average thickness is achieved if you dial 24 loops. It is necessary to knit with an elastic band: two loops from the front side, two from the wrong side.
You should tie the entire strip. Its length depends on the girth of the head. It is calculated by the formula: head girth minus ten cm, divide the resulting value by two.
Then, to create the "braid" element, it will be necessary to make a twist. It is necessary to divide all the loops into two parts, knit them separately. For convenience, you can remove half of the loops, and then put them on the wire. Knit each half for 6 cm.
Then you need to twist, and then start knitting together. It is necessary to knit the same length as in the third paragraph.
It's time to finish the piece. Need to sew the ends. If you do not close the loops, then the seam will be less noticeable.

Headband for girls

We suggest knitting this bandage with a pearl pattern. To do this, you need to dial the strip of the first row, alternating the front, back loops, and on the second row you need to tie the wrong side over the front ones and vice versa.
Dial ten loops, tie the strip. The length should be equal to the circumference of the head.
Separately, make a small rectangle.
Add this rectangle to the bandage, pin it to the edge of the band in the middle. Sew it on from the wrong side.
The last step is to connect the bandage, close (process) the edges. It should make a nice headband.

Knitwear patterns for women

Such an accessory will look great not only on a young girl, but also on a woman who wants to show that she has taste and her free style includes different attributes. It is worth leaving prejudices aside and tying a beautiful accessory for cold and frosty weather with a handkerchief pattern. During preparation, the canvas turns out to be elegant, the main thing is to follow all the instructions.

Knitted turban bandage

The turban headband is an unusual pattern that will look elegant with any classic coat. We bring to your attention an interesting color scheme: divide the entire product in half and make each half in your own color: for example, gray and smoky gray. Colors that differ only by a couple of tones will look great in combination with each other.

Cast on 28-30 sts.
Rows should be knitted like this. First row: edge loop, front, back, front, pattern - about twenty loops are needed on it - then front, back, front, edge. The second row differs only in that the wrong side will be in place of the front and vice versa.
Knit a piece 50 cm long.
Change fur color. Knit another 50 cm.
Fold the halves in half.
Thread the second end of the product into the ring.
Sew the ends together.

Openwork headdress

The bandage can be knitted the simplest: it will look like a strip, the ends of which are tied together. However, if you use an openwork pattern, then such an ordinary product will look interesting and extraordinary. There are a lot of such patterns, their schemes can be found on the Internet. The more complex the drawing, the more experienced the girl who decides to knit it should be. Attention and patience will help to create the necessary shapes, since the patterns must be tracked and not missed a single loop, otherwise everything can be ruined.

Video: how to knit a headband with knitting needles

Did you find an error in the text? Select it, press Ctrl + Enter and we'll fix it!

A task that, without exaggeration, almost all knitters can master. Many articles about knitting make this claim, but here it really is justified. By and large, the dressing is a strip of knitted fabric, sewn on the side or made in a circle and does not have a seam at all.

What yarn can be used for bandages

As a rule, we knit a headband with knitting needles to keep warm in the off-season. When they take off their hats, but the weather is still too cold to completely exclude hats from their wardrobe, a minimized version of the hat is put into action.

Headbands wrap around the head, covering the ears and forehead, providing the necessary warmth without wrinkling the hair. The material for knitting headbands should be chosen the same as for hats: with a high content of wool or angora. There must be at least 30% natural fibers in the thread, otherwise the accessory simply will not fulfill its task.

The thickness of the yarn can be absolutely any. True, threads thicker than 100 m / 100 grams give knitting a certain roughness. If this is not the intended effect, then it is better to choose something thinner. As for many other knitted products, yarn with a thickness of 250-300 m / 100 grams should be considered optimal.

How to navigate patterns and patterns

Modern craftswomen have access to all the knitting wisdom accumulated over the long history of the development of this craft. Now you do not need to flip through the magazine with the patterns studied up and down for the hundredth time. You can choose absolutely any ornament, here the experience and skills of the knitter become decisive.

Both completely simple and decorated with intricate weaves knitted headbands with knitting needles look equally good. Schemes of several patterns are proposed below.

Most often, such accessories are knitted in short rows located across the product, so it is more convenient to use ornaments with longitudinal rapports.

Sometimes you can find other ways of knitting (for example, in the round), but they are a little more complicated and will not be considered by us.

The simplest dressing models

To quickly tie a functional and practical bandage, you can use an elementary elastic band 1:1 or 2:2. They are double-sided, which excludes the presence of the front and back sides. They also give the canvas a certain density. The disadvantage of such dressings is their lack of originality and lack of "zest".

Also often choose a pattern of "honeycomb" or "rice" in order to knit headbands with knitting needles. The schemes of these ornaments are extremely popular.

Depending on the thickness of the yarn, 12-18 loops are cast on the needles and work according to the chosen pattern, forming an even fabric. When it reaches 50 cm in length, work is stopped.

The bandage is sewn at the back and tied around the edge with single crochet or “crustacean step”. True, the last stage can be omitted and the bandage left as is.

Using aran to make bandages

Aranas, braids or plaits are all one name for designing patterns consisting of interlacing loops. You can use elementary or more complex braids, as well as a combination of them, to get really interesting headbands with knitting needles. Schemes of the simplest arans are proposed below. Here is a braid that is formed when weaving six loops to the right. Interlacing interval - 10 rows.

Such a braid can be placed on a bandage as the following photo suggests.

A combination of two patterns is used here: braids and boucle.

Knitting: headband with knitting needles

To create such an accessory, you need to dial 16 loops on the knitting needles (including edge ones). Each first loop is removed, and the last is always front.

Knitting steps:

1 LICP, 1 LICP, 1 LICP, 1 IZNP, 6 LICP, 1 IZNP, 1 LICP, 1 IZNP, 1 LICP.
By drawing.
1 IZNP, 1 LICP, 2 IZNP, 6 LICP, 2 IZNP, 1 LICP, 1 IZNP.
By drawing.
Repeat row 1-4.
1 LICP, 1 IZNP, 1 LICP, 1 IZNP, 6 LICP cross to the right, 1 IZNP, 1 LICP, 1 IZNP, 1 LICP.
By drawing.
Repeat the rapport from the 1st to the 11th row until the canvas is 50 cm in height.

At this stage, all loops must be closed and the edges of the bandage sewn from the wrong side. On both sides, tie the edges with a “crustacean step”.

Creating complex combinations and ornaments

Combining different patterns or inventing your own weave options, you can knit extremely beautiful headbands with knitting needles. Schemes of several rather complex patterns are given below.

They are based on one principle: some large element is placed in the center, and simple background ornaments or narrow arans of several loops are placed along the edges.

Considering the scheme of the next pattern, you can see that it is very wide.

It will be convenient to separate it and use only one of the two components for the bandage: braids in the central part or braid on the edge.

The headband knits quite quickly, and after making several of these accessories, the craftswoman will acquire many valuable skills.

The headband is a very trendy accessory in 2015. The bandage is relevant all year round. In winter, it should be wide (maybe fur), and narrower in spring and autumn, and generally narrow in summer .. This accessory will suit everything: a pullover, jacket, sportswear or a fur coat.

This message contains a large collection of knitted headbands for different seasons. There are descriptions and diagrams, as well as a beautiful selection of ideas and diagrams for bringing such beauty to life.

Knitted headband

You can easily create such a fashionable and very relevant headband in November with your own hands. To do this, you will need a yarn that contains 75% merino, 20% silk and 5% cashmere. Then the product will not be prickly, for softness and comfort you will fall in love with this knitted accessory from the first minute. Consumption: 1 ball of yarn will be enough.

Pay attention to the pattern - the bandage is neatly fastened with a small button and the ends are knitted in triangles. So much more comfortable to wear.

The pattern only in appearance seems complex and impracticable. believe me, in one evening you will create a fashionable knitted accessory with your own hands and you won’t even notice how time flies while watching your favorite movie or TV show!

Knitting pattern in English:

Knitted headband model from Drops magazine.

The beginning of knitting is the middle back.

Cast on 19 sts with 4.5 mm needles. To a height of 8 cm, knit in the following way - 1 cr, 1 skr.l, * 2l, 1 out *, repeat from * to * 5 times. Finish 2L, 1cr, 1cr.

After 8 cm increase all out from 1st to 2nd = 24p.

After 14 cm, the number of out. increase to 3. = 29p.

After 18cm, number of out. increase to 4 = 34 p.

After 21cm to 5 = 39p. So knit up to 24cm in height. The first half is ready.

Decrease sts in mirror order to 19 sts and 48 cm in height.

Fold the bandage and sew with a mattress seam for elasticity.

These are the patterns with which I knitted headbands, it turns out very beautifully.

The scheme shows only the front rows, in the back rows, knit all the loops according to the pattern.

The width of the braid is 18 loops. In height, repeat from the 1st to the 20th row.

Weave of 30 loops (Highlighted in pink) as follows: remove 10 loops on the auxiliary. knitting needle and leave at work, knit 1 purl and 4 facial loops, then with auxiliary. Knit knitting needles 4 facial, 2 purl, 4 facial. The next 5 loops are transferred to the auxiliary knitting needle and left before work, then we knit 4 facial, 2 purl, 4 facial; then with auxiliary We knit 4 knitting needles and 1 purl.

Repeat 1 time from the 1st to the 34th row, then from the 7th to the 34th row

Front loop

Cross 4 loops to the left (remove the 3rd loops on the auxiliary knitting needle and leave before work, purl 1 loop, then 3 loops with the auxiliary knitting needles)

Cross 4 loops to the right (remove 1 loop on the auxiliary knitting needle and leave it at work, knit 3 loops with facial ones, then knit 1 loop with auxiliary knitting needles)

specialist. symbol: knit like this: leave 3 loops on the auxiliary. knitting needle before work, knit 1 front, 2 front together, then with auxiliary. we knit the knitting needles as follows - sleep 1 loop as in knitting, knit the next knit and stretch it through the removed one, then knit 1.

The diagram shows the front and back rows. The width of the braid is 35 loops, in height we repeat from the 1st to the 44th row.

EMPTY CELL - purl (in the front rows of the purl, in the purl rows - front)

front (in the front rows - front, in the purl purl)

Knit two knits together with a knit to the right (Insert the needle into the 2nd loop and 1st loop, starting from the second and knit them together.)

Knit two front ones together with a slope to the left (Remove the first loop as in front knitting, knit the 2nd loop with the front one and stretch the removed loop through it) yarn over

front crossed In the wrong rows, knit as a wrong side crossed. 4 loops together with an inclination to the right

Cross 6 loops to the left (leave 3 loops on the auxiliary knitting needle before work, knit the next 3 loops, then 3 loops with auxiliary knitting needles)

Cross 5 loops to the left (remove 3 loops on the auxiliary knitting needle and leave before work, knit 2 loops, then knit 3 loops from the auxiliary knitting needles)

5 facial cross to the right (leave 2 loops on the auxiliary knitting needle at work, knit 3 facial, then 2 loops with auxiliary knitting needles

EMPTY CELL - NO LOOP! - FACE (facial in the front rows, in the wrong side - wrong side.)

Purl (purl in the facial rows, facial - in the purl)

Knit two knits together with a knit to the right (Insert the needle into the 2nd loop and 1st loop, starting from the second and knit them together.)

In the purl rows, knit a loop with the same designation as 2 purl together with a slope to the left

Knit two front ones together with a tilt to the left (Remove the first loop as in front knitting, knit the 2nd loop with the front one and stretch the removed loop through it)

In the purl rows, knit a loop with the same designation as 2 purl together with a slope to the right.

Cross 6 loops to the right (leave 3 loops on the auxiliary knitting needle at work, knit the next 3 loops, then 3 loops with auxiliary knitting needles)

Cross 6 loops to the left (leave 3 loops on the auxiliary knitting needle before work, knit the next 3 loops, then 3 loops with auxiliary knitting needles)

Simplified version of this pattern:

The diagram shows only the front rows.

In the purl, knit according to the pattern, knit the crochet, knit the purl.

Repeat from 1st to 10th row.

Knit 3 stitches together, knit over to the right.

3 together front (slip 1 loop., knit 2 loops together front and stretch this loop through the removed one)

Beautiful headband - from here

A beautiful headband is decorated with original braids.
I bring to your attention the technique of performing these braids.
To work, you will need semi-woolen yarn (50% wool, 50% acrylic, 250 m / 100 g); knitting needles 3.5 or 4 mm.

Knitting density is approximately 24 p. and 30 p. = 10x10 cm.

DESCRIPTION.

Dial 48 p. + 2 chrome. (50 p.) and knit as follows:

2nd p.: Krom., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Krom.;

4th p.: Krom., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Krom.;

6th p.: Krom., 6 persons., 15 out., 6 persons., 15 out., 6 persons., Krom.;

7th p.: Krom., 6 persons., Close 15 loops, 6 persons., Close 15 p., 6 persons., Krom.;

Close 15 loops

Closed loops form slots in the canvas

8th p.: Krom., 6 persons., Dial 15 loops, 6 persons., Dial 15 loops, 6 persons., Chrome.

Cast on 15 stitches

Repeat from the 1st to the 8th row 14 more times (or as many as necessary for the girth of the head).

After the strip with the holes of the required length is connected, make braids from the resulting rolls as follows:

Make a loop from the first roll

Pass the upper steering wheel into the lower loop.

Repeat until all rudders are connected in a braid

Close loops. Sew on 2 buttons or make ties. So that the braids do not unravel, carefully sew the last rudders to the canvas.

Orange headband

A very stylish headband is made of woolen knitting needles and decorated with a crochet flower. Size: 54-58 You will need: 70 g of orange yarn (100% wool, 250 m x 100 g); knitting needles No. 4.5; hook number 4; needle.