How to make a ring from scrap materials. How it's made: DIY silver ring

Useful tips

The most wonderful spring holiday is just around the corner, and I want to prepare for my beloved women something special. Why not make a gift for March 8th with your own hands? We offer you ideas for creating original jewelry that will delight your loved ones.

DIY bracelets

Elegant bracelet– a wonderful decoration that is loved by women all over the world. It turns out that making an original bracelet with your own hands is not so difficult. Materials for these fun little things can be purchased at specialized stores, including online stores that offer accessories for DIY jewelry.

What you may need for a double bracelet:

-- Leather lace 1.5 millimeters thick and 1-1.5 meters long

Yellow copper ball chain or rhinestone braid 30-40 centimeters long (about enough to wrap around your wrist twice)

Waxed lace or any thick thread 1.5-1.8 meters long

Yellow copper hex nut 0.6 centimeters in diameter

-- Scissors

The braid with rhinestones looks something like this. It can be found in any jewelry supply store.

Let's get started:

1) Fold the leather cord in half to make a loop. This loop will serve as a clasp and into it the nut should fit. Tie a loop with colored waxed thread and wrap it around the base 5-6 times so that the thread does not subsequently loosen or come undone.

2) Place a ball chain in the center of the leather cord and begin tying it with colored thread, grabbing each bead one at a time.

3) Continue tying the leather cord with the ball chain until you have product of the desired length to wrap your wrist twice.

4) When the desired length is reached and the ball chain ends, tie the leather lace with colored thread several times and tie the end of the leather cord with a knot.

5) Place a nut on top and make another knot to secure it.

6) Cut off the unnecessary lace at the end with scissors, wrap it around your wrist and secure the “lock”. The bracelet is ready!

The length and quantity of materials are indicated for a double bracelet, but you can make single or triple bracelets. The threads can be any color of your choice.

DIY pin bracelet

Bracelets made of pins and beads- a beautiful and very simple decoration that can be made in several versions, it all depends on your imagination and available materials.

What you will need:

-- Pins

Beads

-- Elastic stretch cord

Let's get started:

1) Do many blanks from beads and pins. Combine colors as your imagination wishes: you can make single-color rows, or multi-colored ones. Beads of different sizes and textures also look good next to each other.

2) Prepare 2 long pieces of elastic cord and string pins on them.

3) Pin the ends of the laces together when the bracelet reaches the desired length. As you work, place the bracelet on your wrist to check its length. Don't make it too tight that it restricts the blood flow, or too loose that it flops around.

DIY leather bracelet

Leather rope bracelet in the form of a pigtail, wrapped several times around the hand, it looks quite cute, despite the rather rough material. Making it yourself is very simple.

What you will need:

-- Leather or suede lace (1)

Scissors (2)

Pliers (3)

Clasp (4)

Two rings (5)

Two jewelry clips (6)

-- Wrench (7)

Let's get started:

1) Cut a piece of leather cord long enough to be wrapped around your wrist 4 times without being too tight.

2) Cut 2 more pieces of cord of the same length.

3) Hold the ends of all three laces and secure them with a clip.

4) Using a wrench, secure the laces to the edge of the table to make the product easier to work with. Next, braid the cords.

5) Cut off the excess edge and place a second clamp on the other end of the cords, pressing it firmly.

6) Attach a clasp to the ends of the bracelet using rings. The decoration is ready.

Very interesting bracelets are made when macrame technique is combined with beads. These bracelets are called Shambhala bracelets. Learning how to make these bracelets is not difficult. The main thing is to understand the principle.

DIY Shambhala bracelet (video)

How to make a ring with your own hands

Do you think that it is impossible to make an original ring at home? You are wrong! It turns out that in your home you can find a lot of unnecessary things, which may be useful to you in your work. Let's take, for example, old forks, spoons, knives that you haven't used for a long time, but you feel sorry to throw them away.

We offer an idea on how in a couple of minutes you can make from old iron utensils with elegant handles original ring.

What you will need:

-- Any old forks, knives, spoons with beautifully decorated handles. This is the basis of your product. It's better if it's silver

-- Metal cutter or hacksaw

Pliers

Sandpaper

Sheet of loose paper

-- Pen

Let's get started:

1) First, decide for yourself, what kind of rings do you want to get?. You can choose the one that seems to wrap around your finger - type 1 (Fig. 1), or one of its ends will be hidden and will not be visible - type 2 (Fig. 2). The length of the workpiece depends on this.

2) At the second stage, you need to choose a suitable cutlery, which will soon turn into a ring.

3) Take a strip of paper and wrap it around your finger, on which you will wear the ring. Mark with a pen where the strip meets the other end. If you choose ring type 2, add approximately 6 millimeters and put a bold mark. If you chose a type 1 ring, then there is no need to add extra millimeters.

4) Using the resulting paper measurement, you can make a blank for the ring by cutting off the fork handle in the right place using metal cutter or hacksaw.

5) Sand the cut edge of the fork so it's not sharp and you won't get hurt when the ring is finished.

6) In the last step you need to carefully use pliers bend the resulting tip of the fork into a ring. If the fork is made of silver, you can bend it without problems.

7) The result should be something like this:

DIY ring with stone

Another very stylish and original ring can be made from a simple pebble that you find on the street, wire and paint. In the example we will show how to easily and quickly make a ring with a “piece of gold”.

What you will need:

-- Pebble of your favorite shape

Golden wire 15-20 centimeters long

Blank for dimensionless ring

Superglue for jewelry

-- Spray can with gold paint

Let's get started:

1) First you need to paint the stone from spray paint. To do this, place a pebble on a sheet of paper and direct a stream of paint at it. Once dry, turn the stone over and work on the other side.

2) Using superglue, glue the ring to the stone. The ring should be made of solid wire or metal and it is better if it is heavy enough. It is also important that you can adjust ring size.

3) Wrap the wire around the stone together with the ring several times. This will help attach the stone more tightly to the ring, and will also be part of the original design.

4) Wrap the remaining wire around the ring.

5) As a result, you will get a very stylish decoration. You can use any paint you like.

Homemade button ring

In the jewelry making materials store you can purchase ring base, to which you can attach any details: buttons, beads and other materials. An original ring can be made from old bright buttons and a piece of fabric.

What you will need:

-- A round piece of thin black felt about 5 centimeters in diameter (1)

Decorative buttons in desired colors (2)

Superglue, but an electric glue gun is better (3)

Ring with base (4)

-- Jewelry pliers (5)

Let's get started:

1) Remove the sewing loops from the buttons using pliers.

2) Glue the buttons to a piece of felt from the center in a circle close to each other to make a round shape. Let the glue dry thoroughly.

3) Cut off the excess felt from the sides. The edges can be left a little uneven.

4) Lubricate the base of the ring well with glue.

5) Glue the ring to the button part you received earlier. Let dry.

DIY necklaces

Necklace– a wonderful decoration that always catches the eye. If you love large, bright necklaces, we suggest you try making one using embellished pistachio shells.

What you will need:

-- Single pistachio shells (1)

A small piece of thick cardboard (2)

Glue gun or superglue (3)

Nail polish or acrylic paint (4)

Brush (5)

Chain (6)

2 rings and clasp (7)

Needle nose pliers (8)

-- Scissors (9)

Let's get started:

1) Cut out a semicircular pattern from cardboard that will become the base of your necklace. Its size is up to you.

2) Attach rings and a chain to the edges of the pattern using needle-nose pliers.

3) Prepare shells for pistachios, having previously painted them in the desired colors.

4) Using glue, glue the shells to the base, starting from the edge. Advice: Before gluing, attach the shells to the cardboard and think about how you will lay them out.

DIY beaded necklace

To make this decoration you need to select beads of the desired color. The size of the necklace largely depends on the size of the individual beads, so if you want a thicker piece, choose larger beads. It's hard to say how many beads you might need, but it's better to have extra.

What you will need:

-- Beads of the same or different colors (1)

Chain (2)

Scissors (3)

Needle nose pliers (4)

Adjustable rings – 2 pieces (5)

Clasp (6)

Calottes - special clips for attaching beads to a chain and masking knots (7)

-- Fishing line or thick thread (8)

Let's get started:

1) Cut 6 pieces thread or fishing line approximately 25 centimeters, on each of which string beads approximately 15 centimeters.

2) You should succeed 6 strands of beads, from which you need to make 3 pairs, connecting the ends of two threads and securing them at the edges with calottes. Make sure the knot is tied as close to the beads as possible so they don't dangle. Cut off the excess thread.

3) Connect 3 pairs of threads to the chain using a ring, and then do the same with the other ends.

Advice: Before connecting the other ends of the beads to the chain, braid them to create a weave effect.

4) The chain must first be divided into 2 parts depending on the desired length and connect both ends with the clasp.

5) As a result, you should end up with a necklace like this:

DIY neck decoration

An original neck decoration can be made from a simple champagne corks with a little imagination.

What you will need:

-- Cutting board

Sharp knife

Champagne cork

Super glue

Leather or suede cord about 1 meter long

A beautiful button or earring with a stone for the centerpiece

Nuts: 1 regular hex and 2 cap nuts

-- Pin

Let's get started:

1) Use a knife to cut about one-third of the length of the cork. Make two holes in the larger half using a drill, and then use a pin to thread the two ends of the lace through both holes.

2) Thread the ends of the laces through the nut and secure it to the bottom of the plug. To the ends of the laces glue the cap nuts. Attach an earring or button to the center of the cork on the convex side.

As a result, you will get an original decoration, the length of which can be adjusted.

DIY hairpins

Hair clip can be made using a piece of lace beads and feathers. This original vintage style hairpin is suitable not only for bridesmaid dresses, but also for other festive outfits.

What you will need:

-- Lace ribbon 2-2.5 centimeters thick and 45 centimeters long

A piece of white felt

Scissors

Glue gun

Threads with a needle

Bead or decorative button

-- Base for hairpins

Let's get started:

1) Sew a white lace ribbon with thread so that, after tightening the thread, you can roll up a flower. You can sew by hand or use a sewing machine.

2) Cut a circle from felt with a diameter of approximately 5 centimeters. Glue the lace to the felt using a glue gun.

3) Glue a couple of feathers and a hairpin to the felt on the back side. Let the glue dry.

4) Glue or sew a bead or decorative button in the central part.

DIY feather hair clip

Hair clips with feathers look very impressive. If these are bright and colorful feathers, then the decoration is suitable for festive outfits; if the feathers are of natural colors, such hairpins can be worn with everyday outfits.

What you will need:

-- Regular base for hairpins

A piece of felt material

A glass or any round measure to cut out an even circle

Beads or decorative buttons

Scissors

--Glue gun or superglue

Let's get started:

1) Using a glass or other device, cut out two circles with the diameter about 5 centimeters or more depending on the size of the base clip.

2) After making the slits, insert the base into one circle of felt.

3) Glue two circles of fabric together with glue to strengthen the base clip.

4) Glue the first bottom layer of feathers on the back side, then the top one.

5) Glue a bead or decorative button to the center.

6) The hairpin is ready.

DIY earrings

Interesting update option hoop earrings You can make your own by adding hanging laces to them. If you're tired of your regular hoop earrings, updating them couldn't be easier. Moreover, laces They are as easy to remove as they are to attach, so you can return your earrings to their original look at any time.

What you will need:

-- Any hoop earrings, in the example - with a detail inside the ring

Thin laces of any color

-- Scissors

Let's get started:

1) Prepare the desired number of laces of the required length depending on the size of the ring. Please note that the lace will be folded in half.

2) Fold the lace in half and pass the ends through the loop, grabbing the ring as shown in the photo. Do the same with all the laces.

3) In the end you will have a product like this with “fringe”. You can also trim the ends of the laces with scissors.

DIY feather earrings

Jewelry that is used as details looks very original. bird feathers. Feathers can be purchased at a jewelry supply store, or found elsewhere. In stores there are feathers not only of natural colors, but also artificially colored ones.

5) Attach a hook to the ring.

6) As a result, you get an earring like this. Make the second earring in the same way.

Many people like to decorate their fingers, and on store shelves you can now find rings for every taste. But you and I know that there is a very special magic in things made with your own hands.

In this master class, I suggest you make a laconic but cute ring using the wire wrap technique. Wire wrap literally means “twisting a wire” and combines various techniques for creating jewelry, from simple ones, like our ring, to very complex and literally intricate ones. This direction is now actively gaining momentum, although it has not yet acquired a generally accepted Russian name.

So, to produce a ring we will need:

• needle file
• platypuses, it is desirable that they are smooth at the ends, then they will not damage the wire
• wire cutters
• a cylindrical object with a diameter slightly larger than a finger (in my case, a marker worked perfectly)
• a piece of copper wire about half a meter long and about 0.8 mm in diameter (generally speaking, you can take any wire, as long as it is soft enough: brass, regular knitting wire, or special wire from hardware stores)

Making a ring from twisted wire

First, we take our improvised crossbar (that is, a cylindrical object) and tightly wind the wire onto it three times. In this case, you need to ensure that as a result of this operation the “tails” are approximately the same length. After winding, the “tails” need to be intertwined with each other, pulling the wire quite tightly.

Now we begin to form the “whirlpool” itself. We align the turns so that they lie parallel and fit closely to each other, then we twist the ends of the wire even more tightly.

We continue to twist, holding the top with a finger so that the “whirlpool” is flat. This requires some skill and may not work out right away, but we do not retreat from difficulties!

When the “whirlpool” grows to the desired size, leave the free ends perpendicular to the rim of the ring.

We remove the ring from our cylindrical object and begin to wrap the “tails” of the wire around the rim.

Be sure to press each turn with duckbills, but carefully and gently so as not to leave dents on the wire.

When there are three lines, the ends of the wire need to be cut with wire cutters. We leave only very short pieces, approximately the width of the rim of the ring, and treat them with natfil so as not to prick your finger. We approach this task responsibly and smooth the ends until they are round.

We bend these rounded “tails” with duckbills onto the wrong side of the rim and press them well.

This is roughly what it should look like from the inside out. If the “whirlpool” turns out to be too convex for your liking, you can also press it in with platypuses. But carefully! It is very easy to scratch the wire.

Now the ring is ready. You can try it on! And wear it with pleasure.
Generally speaking, to give a piece a more finished look, it should be patinated and polished. But this is a broad topic and, perhaps, for a separate master class.

Thank you for your attention to my MK, and look into my workshop

Dear visitors to the “Handmade and Creative” website, I welcome you and would like to introduce you to an interesting master class on creating an attractive, and at the same time very simple to create, ring. In order to make a ring with my own hands, I tried to describe in detail each stage of the work. The master class also contains illustrations, so you can easily navigate during the process of creating a product.

Required materials and tools:

• several beads (amethyst beads were used in this master class);
• wire, the size must match the size of the bead hole. In this case, two types of wire d-22 and d-18 were used;
• thin nose pliers;
• wire cutters;
• round nose pliers;
• a special metal mold to create the correct shape of the ring; if one is missing, you can use any rounded metal object, for example, a thin pipe or a stool leg.

Ring shape

To create the shape of the ring, we will use wire with a diameter of d-18. Using wire cutters, cut a wire about 3 lengths around the circumference of your finger. We begin to wrap the wire around the round base of the ring, in this case it is an ordinary wooden object.

Stringing beads

We draw the ends in the center of the ring and string a bead on each end. A master class on how to make a ring with your own hands is at the equator, hold on tight;)

Let's continue

Now we turn each wire through the bottom of the ring and take them out in directions opposite to each other. Using pliers, we again thread the pieces of wire through the center of the ring and fix them.

We use a different wire

Now we will use the second piece of wire, the diameter of which is d-22. In this case, we will use this wire to make the side spirals of the ring as a pattern. We decide what size the spirals will be, and turn the wire crosswise through the base of each bead, thereby bringing the ends of the wire out asymmetrically to each other. In the photo, the length of each end of the wire is about 2.5 cm (1 inch), so the spirals will not be particularly large.

Spiral ring as a pattern

Once we have prepared the wire for the spirals, use needle nose pliers to grab the end of the wire and roll it towards the base of the ring. We try to make the spiral tight, so press the wire as hard as possible. We repeat the same action with the second piece of wire. As a result, we will have two side spirals.

DIY ring? It's not difficult at all! A detailed master class with photos and instructions will tell you how to make a ring at home. Good luck!

website - Navigator in the world of gifts and souvenirs

Ira Fried - jeweler, designer, artist. She makes amazing pieces that are minimalistic and very vibrant. Metal meets wood, gold meets silver, to wrap around your finger in a graceful ring. Pendants are fragile twigs, earrings are fragments, drops. Periods, commas and quotation marks - stylish and “tasty”, just the way I like them :)

In her work she is guided by two rules:
Simplicity will save the world!
There are no ideal forms in nature and I like it!

Ira is inspired by Scandinavia and minimalism, which determines the simple, northern beauty of her jewelry.

But it’s always better to see once: Ira showed us the entire process of creating a product, in this case, a ring, from start to finish.

"So, let's begin!
First, we collect the required amount of silver and melt it in crucibles into a total mass.

When the metal becomes liquid, we pour it into the mold. The metal is fixed in it and cools instantly...

Just like this “bullet”. The bullets can be different depending on what “caliber” we have chosen.

Next, in order to get closer to the shape of the ring, we need to make a strip from the “bullet”. To do this, we need a Roller machine, where metal is rolled between two shafts. First, we level the square to the required size in the grooved shafts, and then we roll it in the flat shafts and get a strip of the required thickness.

When rolling metal, it needs to be periodically annealed, or as jewelers say, “released.” This is done in order to relieve stress from the metal so that it can be rolled further more easily.

To get a specific ring, for example size 17.5, we need to measure out a strip of the desired size. They gave me an excellent formula that I always use: strip thickness 1.7 times 3 + ring size 17.5 times 3 = 57.6 mm (required strip length). Then we need to connect the edges and close them into a circle.

They must close very tightly, only then can we quickly and well seal the ring. We do this using a torch and solder (an alloy of silver and other metals).

When the ends are firmly fastened, we put this strange shape on the Rigle and, to spite the neighbors, knock on the future ring with a wooden hammer, giving it the ideal shape and the desired size. And now we already have a full-fledged ring that can be put on your finger, although it’s not very beautiful yet :) Let’s start decorating it. First, we throw it into the bleach for 2-3 minutes and the blackness disappears from the ring.

Then we carefully work with a file, smooth out all the irregularities and release the beauty of the metal.

Don’t forget to collect silver filings, they will later turn into equally beautiful rings :)

After the file, we go to the drill and sand the ring a little more with sandpaper. And now, the ring is ready! But we don’t have a simple ring, but with a duck.

We scratch an approximate drawing on the ring and move on to all well-known dental burs. No, no, we won’t treat the teeth yet, but they will help us make a duck.

Somehow, working with burs, we first get something similar to a duck, and then a real one. Quack quack!:)

In order for the duck to be clearly visible on our ring, it needs to be blackened. There are different methods of blackening, one of them is very simple and I use it for small parts. Blackening is done using a candle and iodine. So, first you need to smoke the required area, and then cauterize it with iodine.

Shall we move on to the photo report? ;)

The workshop is located at the developing Crystal plant. Since it was already getting dark, it was raining and I was late, I didn’t take pictures of him. But it is very atmospheric, so I illustrate the story with a photo from the Internet:

The plant is located near Yauza, across the river from Winzavod and Artplay. Now, when I was looking for a photo, I saw that the plant will be reconstructed: they plan to create a pleasant public space with cafes, shops, creative offices and more. Already last summer there were fairs and festivals there, many people visited the new place. The concept and appearance are reminiscent of the Bottle design factory, isn't it? Competition! :)

But about the plant another time, I want to return there when the weather is better to explore a new party place;) And now let’s return to the master class, which took place in the creative workshop. It is combined with a small but nice photo studio, so there are a lot of cameras of varying degrees of vintage, paintings and paint-splattered easels. Atmospheric place!

This is what a jeweler's workplace looks like - nothing luxurious, but not only silver, but also gold and precious stones are processed here. At the bottom there is a pedal for the sanding machine.

First we took a small amount of silver and melted it.

After this, the molten mass was poured into a mold, where it froze, but not tightly. In general, silver is a fairly malleable metal and can be worked with for some time without further melting.

Having cooled the resulting “sausage” in cold water, we moved on to running-in. It occurs in two stages: first you need to set the width of the ring (the right side of the machine), and then the thickness (the left side). You insert the sausage into the opening, turn the handle and it crawls through the hole. The running-in takes place gradually, with approximately 30 spins at each stage. That is, you cannot immediately take and flatten the metal in one scroll - then it will crack and you will have to start over.

During the last scroll, it was possible to imprint some pattern on the metal (it's still soft, remember?). They offered me a piece of lace, something else - I chose a leaf, because just recently I got a ring in the form of a twig, and I decided to make this ring for the phalanx. It turned out to be such an eco-theme :)

After that, using a thread, I measured the circumference of my finger and cut off the required amount. This was difficult, because the jigsaw needs to be held strictly vertically and ensure that it does not “move” to the side. Here they helped me, since this is an important stage - the cuts must be perfectly even in order to be joined later.

Then a ring is formed from the strip around a cone-shaped stick using a soft hammer. I'm very focused and tense :)

Now it's time to bleach the silver in acid to return the original color - it darkens after remelting.

Next stage: sanding in several ways. First, the side edges of the ring are sanded using sandpaper.

Then the outer and inner sides are sanded with sandpaper rolled into a drill. The ring must be held tightly, otherwise it may fly out into the eye. And this is not so simple, because it vibrates strongly under the influence of the drill - it flew away a couple of times, so I preferred to photograph this stage :)

After this, the ring goes through the final stage of grinding on a machine with a rapidly spinning rubber “wheel”. Due to rapid friction, the ring instantly heats up and after each touch to the “wheel” it must be immersed in cold water.

That's it, the ring is ready! All that remains is to clean it in an ultrasonic bath - leave it there for 10 minutes. You can rest and wipe the sweat of zeal from your forehead :)

And here is the result!

An indescribable feeling when you make something yourself: now I wear this ring without taking it off - here it is, the power of handmade. So I advise you to go to the master class, it is not at all expensive. Or an option for guys: buy a certificate for MK and give it as a gift on February 14 or March 8;)

Thanks to my jewelry mentors who helped me create the photo report!