How to trim the ends of your hair correctly? How to trim split ends of your hair How to trim your own split ends.

Visits to professional hairdressers who know their clients and their desires inspire and inspire, but there are also situations when hairdressers or beauty salons begin to bypass the 10th road.

We won’t list the reasons, we’ll talk about how to cut your own ends, short or long, at home: evenly or in a semicircle, in a cascade or ladder, or in flagella using step-by-step videos and photos of the result, as well as scissors or a clipper. What does that require?

How to cut hair correctly? What devices will make cutting hair easier? What haircut options to choose for home?

Let's look at options for cutting hair ends, since it will be difficult to get a professional haircut right away.

Cutting the ends will help you start learning hairdressing, and we will look at examples and methods with videos, as well as mistakes that beginners often make.

If suddenly you overdid it and shortened the ends or bangs too short, then we will calm you down and recommend adding vitamins and flaxseed oil to your diet, as well as using masks with honey - all recipes and master classes are waiting for you.

Pros:

Minuses:

  • it is necessary to purchase professional tools or suitable and very well sharpened ones;
  • responsibility for the result falls entirely on you;
  • cutting with dull scissors will lead to split hair;
  • mirrors (or dressing table) are a must;

Photos and videos with instructions and step-by-step explanations

We invite you to learn from photos and videos, so you will see the entire haircut process from start to finish, which will allow you to avoid mistakes.

Instructions for use:


Advice: cut off the length a little shorter than we want for the first time; cutting off the excess is always easier than correcting what has already been cut.

Tools needed for cutting:

We will need: scissors, rubber bands, hair straightener if you have curly hair, a wide-toothed comb, 2 large mirrors, 10-20 minutes free so that no one disturbs you, a broom and dustpan for collecting hair, a hair humidifier or just wet your hair in bath and squeeze lightly.

Tip: Place a towel over your shoulders to prevent your hair from getting your clothes wet.

Remove carpets or other coverings first so that the floor is smooth: laminate, linoleum or wood. Cover the floor with newspapers, if you don’t want revenge, all that’s left is to collect the newspapers and throw them away or burn them along with your cut hair.

Cascade

This haircut technique is suitable for home use, but not for salons or hairdressers.

Although, it is not inferior in terms of results to the salon one, although it will take much less time and money. Let's get started!

Prepare for haircut: sharp hairdressing scissors, an elastic band, combs (one brush, the other with sparse teeth), a mirror.

Who already had

  1. Comb your hair thoroughly with a brush and then with a wide-tooth comb.
  2. Tie a high ponytail on the top of your head.
  3. Make an even cut parallel to the floor.
  4. For lovers of torn haircuts, we suggest cutting only with the ends, and not with the entire blade. This will allow the haircut to lie more softly and smoothly.

    Straighten the cut, if desired, profile with thinning scissors. The haircut is ready.

But if you didn’t like the cascade option, then we suggest watching 2 more videos with more careful hair processing.

For curly ones

The principle of haircut is the same, but at the same time we will cut a ladder on the face and make it more visible for hair of medium length or long

We will need:

  1. Wet your hair under the tap or using a spray.
  2. Comb thoroughly with your head down. Gather them together and trim the ends evenly. We make the cut with scissors at an angle and only with the tips.
  3. For very thick hair, separate thin strands and straighten them until all the hair is the same length.
  4. If you previously had a haircut without a ladder, then you will have to cut off a little more length.

    We focus on the shortest strand, but this is for experienced people; for the first time, cut along the longest one, so that you can correct flaws in case of an incorrect haircut.

    Following our advice, then you can fix it yourself or with the help of a hairdresser.

We divide the hair into a middle parting, combing the hair.

We cut the ladder in front like this:

  1. We determine the strand that will be the shortest and the beginning of our ladder.
  2. Separate it and comb it thoroughly onto your face. We place it parallel to the floor, extending it to its full length. We cut with an even cut, but you can also use the tips.
  3. The second strand is cut in the same way; if you have very long hair, then simply pull it out, and then, holding the ends with your fingers, cut it, bringing it closer to your face perpendicular to the ends with an even cut.
  4. We repeat a similar ladder with the second side.
  5. The result of such a haircut is a ladder on the sides and in front and a semicircle at the back.

Cascade haircut training video

For long

What is the difference between cutting long hair from medium length or short hair?

The fact that it is easier to cut them on one side, you can simply take a strand and move it to either side when you see your ends, which is extremely difficult to do with short ones; it is difficult to turn your hands in the right direction.

But it is necessary to cut the back or even the entire length not on a tiny area of ​​the floor, but by spreading a newspaper or collecting a carpet on the bare floor.

Katya Gore and Little Lily share these subtleties with you.

Features for long

Option from Katya Gor

Video blogger and hairdresser rolled into one, and also the owner of long and chic blond curls Katya Gore, she shares her secrets for cutting ends with her own hands at home, and also tells and shows the results on her hair.

We will need: scissors and spray with water.

  1. Tilt your head down perpendicular to the floor, bringing everything to the front and comb thoroughly.
  2. Spray them lightly so they are slightly damp but not wet.
  3. Important: the forehead and crown of the head should be directed directly to the floor during the haircut process.

  4. Select a control strand and determine how long we will cut our ends. Cut off the necessary part.
  5. We collect the hair and hold it between our fingers, cut it with teeth, holding the scissors perpendicular to the cut and level it along the control strand.
  6. Result: you should have a smooth staircase.
  7. For those who also like stairs in the side areas. Select the side zones up to the ear, this is the zone we will work with. Cut off the rounded parts between your fingers and the ladder itself, moving from top to bottom.
  8. The last step is to create a rounding at the place of transition from the ladder to the main mass; to do this, lightly trim, giving a rounded trajectory.
  9. Refresh your bangs by trimming the ends slightly.

Training video on how to maintain hair length and cut the ends in a cascade:

Thanks to this haircut, the ends are easily curled even after wearing and unraveling a regular braid. The temple areas frame the face effectively, making the appearance more well-groomed.

Ladder - deep triangle

This option has a higher level of difficulty, so ask your mom or friend for help.

  1. Comb your hair thoroughly and divide it into 2 halves along a straight parting.
  2. Tilt your head perpendicular to the floor and cut the control strand to the desired length - this is the one closest to the occipital area, repeat in the same way with the 2nd one.
  3. Check to see if the strands you cut are the same length; if so, then we begin to equalize the rest of the hair.
  4. We collect the hair between our fingers and carefully comb it, while lowering our fingers almost to the level of the control strand so that we can see where we need to cut.
  5. Separate the front control strand and use it to equalize the 2nd half. Similar method as described above. We do the haircut with teeth.
  6. We comb the hair alternately on 2 sides to check the quality of the haircut.
  7. If desired, we also perform a ladder on the front strands (temporal zone). To do this, select a zone and cut it along the desired path.

The video will teach you how to cut the ends of a deep ladder into a triangle shape yourself:

Semicircle


We arrange mirrors or place a chair so that you can clearly see what is happening behind you. Prepare everything you need described above.

  1. Comb clean hair and tie a ponytail, tie the ponytail with rubber bands in several places so that there are elastic bands every few centimeters. You should get the last one 1 cm before the cut point.
  2. Cut off the planned centimeter. We recommend cutting parallel to the horizon; we will use these ends to align all the rest of the hair.
  3. Unwind your hair and comb it, parting it across your entire head in the middle and lay it on your shoulders.

    Find the strands you cut and align all the hair on one side and the other using them.

    Check that the length of both strands is the same; to do this, take a strand and bring it together near the face.

  4. We put the cut hair back and check that everything has been done smoothly.
    The main advantage of such a haircut is the exact observance of cutting off 1 or 2 cm, which sometimes the hairdresser does not understand. Minus: only rounded edge.

Master class in video on cutting ends in a semicircle from Lily Moon

Smooth

There are situations when the goal of cutting the ends is a horizontal, absolutely even cut; it is ideal to achieve this with a machine, but it is extremely difficult to do this with your own hands, especially from the back.

  1. Comb clean hair and tie a ponytail, tie the ponytail with rubber bands in several places so that there are elastic bands every few centimeters. You should get the latter 1 cm before the cut point or exactly in this place.
  2. Cut off the planned centimeter. We recommend cutting strictly parallel to the horizon; we will use these tips to align all other curls.
  3. Loosen your hair and comb it, collect the entire upper part of the curls in a ponytail or shell, leaving a thin strip in the back of the head. Separate them into a parting.
  4. Take the 2 back strands that you cut, move them forward to your shoulders and align all the remaining ones on one side and the other along them.

    Important: comb and straighten them, stretch them and fix them between your fingers.

  5. You will notice that the inner strands are several times shorter than the inner ones; now our task is to shorten the ends and make them even.
  6. We move the cut hair forward and cut all the ends, but to avoid blunt cuts, use scissors to cut towards the fingers, with the teeth, i.e. We put the scissors.

Training video on cutting ends with an even cut

Typewriter

This method is suitable when you don’t have scissors or for some reason you don’t want to use them, but you have a hair clipper.

Let's consider the option of a bob haircut, the model has hair below the shoulders, after the haircut it will be of medium length to the shoulders.

You will need: a machine, a comb, rubber bands, scissors for trimming hair, mirrors.

  1. Divide all the hair into 4 parts: a straight parting in the middle and 2 above the ears along straight lines.
  2. Tie 4 ponytails with rubber bands at the cut point; if in doubt, make 2 rubber bands and make a cut between them.
  3. Be careful that all ponytails are the same length.
  4. After that, we cut off the ends under the rubber band with a machine.
  5. Align the transition between all the ponytails by smoothing the cuts using a machine. Additionally, we smooth out the transitions with scissors, checking against the control strand.
  6. We check the quality of the haircut after washing and blow-drying.

The video will help you step by step to cut the ends with a clipper, for example, a bob haircut

Short

The shorter the hair, the more difficult it is to cut it yourself.
Recommendation for cutting the ends of short haircuts; for beginners, consult a hairdresser.

If you decide to remove the increased length on your ears yourself or you don’t like the bangs, then do it according to the instructions:

We find your haircut model in photo and video format, we need step-by-step actions.

Repeat after the master the haircut of part of the temples and bangs. For the rear area, ask for help as... It is extremely difficult to do exactly on your own.

Splits - victory in 3 methods


Split ends bother both long-haired beauties and those whose length barely touches their shoulders. Therefore, learning to cut split ends exclusively with your own hands is very convenient and practical.

Since each method proposed is aimed at maintaining the length, but at the same time carefully elaborating by cutting off the split ends.

In all 3 cases you will need: sharp scissors and patience, with plenty of free time, the more it is needed the more split ends you have.

Flagella

Sitting by the window on a sunny day, we twist the thin strands into flagella and lightly “fluff” them, moving from bottom to top and cutting off only the split ends, so we move in rows throughout the entire head.

The thicker the flagella, the fewer ends you can process, so at first curl very thin ones; after the first such haircut, it is recommended to make thicker ones the next time.

Because during the first time, if you do it well, most of the split ends will be cut off and after a month or 2 there won’t be enough time to grow back.

3 finger clamp

Ideal for those who are afraid to cut off extra centimeters. Double fixation with fingers allows you to release and cut the ends more carefully.

Look at the photo above, where there are all 3 options, on the second you will see the placement of your fingers and the correct fixation of the strand, so you will be able to not only fix it, but also move it.

Try this method, it may be the most suitable for you.

Pigtail

We braid thin braids and, inspecting the braiding, tousle and cut off weak and dissected ones, and process all the curls in this way.

It is important to understand that any experiments with clippers or scissors are a risk that is quite easy to correct, especially if you overdid it and now you are concerned about the issue, then our article will help.

Often mothers, and even schoolgirls themselves, limit themselves to just a braid or ponytail, but now we offer to learn how to do your own hairstyle for school in 5 minutes with photos and video tutorials, everything is described in detail.

The desire to have smooth and even curls is experienced by many girls, young women and women. We invite you to learn how to straighten your hair without an iron or hair dryer at home quickly at

Child - girl at home

The methods are quick and very economical, which will allow you not to waste your time and money, as well as your nerves, trying to seat your child in a chair at the hairdresser and persuade him to sit upright and not move.

Suitable for both naturally curly and straight hair. The length is not important, which means it will be a great help for long and medium-length hair cut in a ladder.

Its main advantage is that we preserve the entire length, working only with the ends and removing difficult to comb areas.

For this method you will need: scissors, hair moisturizer, rubber bands - 4-5 pcs, combs with a brush and fine teeth.

Instructions:

  1. Comb your hair thoroughly and moisturize.
  2. Divide into zones and tie ponytails. The first zone is from the forehead to the beginning of the ears. The second to the middle of the back of the head. The third is the remaining hair.
  3. Gather each zone, tie it with an elastic band, then use 2 rubber bands to mark the places where the hair is shortest, along which we will make a cut. Be sure to moisturize the baby’s curls during the process as they dry out.
  4. We make a cut, only we place the scissors not horizontally as in the video, but vertically cutting the ends, placing them perpendicular to the teeth.
  5. We let our hair down and check that we have cut the length evenly.

The training video clearly shows how to trim the ends of a girl yourself:

That's all for today, we hope that at least 1 method suited you.

Here are the options for how to cut the ends of your hair at home with video lessons for beginners and those who have already done this more than once, but want to diversify their arsenal.

We wish you good luck in this much needed and useful endeavor for girls and women!

Frequent use of thermal devices, exposure to chemicals, and improper care can lead to dry hair. This is fraught not only with a deterioration in the quality of the fabric, but also with the problem of cutting ends. Split hair looks unkempt. Curls are prone to breaking. It is not always possible to cure this defect. Most often they resort to various cutting technologies. Then measures are taken to prevent recurrence of the problem. Let's figure out what is more effective to do and how to trim split ends along the entire length yourself at home.

Cut or treat

Any hair needs regular haircuts of a “therapeutic” nature: trimming the ends. Periodically shortening your hair will help:

  • maintain the shape of the haircut;
  • “update” the cut line;
  • stop or prevent split ends problem.

The current state of your hair is not always a reflection of its health. The absence of split ends does not indicate an ideal state of affairs. The problem can arise suddenly and develop rapidly.

There are many factors favoring the appearance of delamination of rods:

  • improper nutrition (insufficient supply of vitamins, minerals, disruptions in the regime);
  • violation of water balance (lack of moisture in the body);
  • adverse environmental influences (wind, scorching sun, precipitation, temperature changes, salt or chlorine in water);
  • aggressive influences of a mechanical, thermal, chemical nature (laying, painting).

Even those who have never encountered this problem can notice the appearance of split ends. The occurrence is not related to the type or condition of the hair. Most often, the tendency is attributed to dry, long, thin curls, which are regularly exposed to the factors listed earlier.

To prevent and eliminate the problem, the hair is periodically trimmed. For therapeutic purposes, this is the complete elimination of unfavorable areas with the capture of 3–5 mm of healthy tissue. For prevention, it is enough to remove 1–1.5 cm of apparently healthy length.

Trimming is carried out at intervals of 4–12 weeks. The frequency of haircuts is determined by the speed of hair growth. It is conditionally recommended to carry out preventive trimming of the ends at the following frequency:

  • 8–12 weeks for long hair;
  • 6–8 weeks for medium length curls;
  • 4-8 weeks for short hair.

Attention! If your goal is to grow length, you should not neglect trimming your hair. A fresh cut guarantees faster and better growth.

If a cross-section problem occurs, the problem is eliminated as quickly as possible. The best solution is a haircut. You can try to remove a minor problem without using scissors. Cosmetic preparations with special effects and medical procedures are used. As a last resort, it is permissible to use techniques that mask the problem.

Methods for cutting hair with split ends

To preserve the length as much as possible, but effectively remove damaged areas, there are various methods for cutting split ends. One or another option is used depending on the scale of the problem and the ease of use of the technology.

Split ender machine

The device called “Split-Ender” looks like a regular comb, but has a more impressive size. The machine is enclosed in a plastic case. The working mechanism consists of a chamber with a leveling roller and a blade. The cut sections are collected in a special compartment. The device has an ergonomic and attractive design. The handle with rubber inserts allows you to hold the machine securely. The mechanism is powered by AA batteries.

Before using the device, the hair is washed, dried, and combed. To use the machine, separate the strand from the total mass, turn on the device, and open the clamp of the working chamber. The hair is placed between the straightening teeth. The device is slowly moved along the length of the strand. There is a simultaneous straightening of the curl and cutting off those parts that stick out in different directions(usually these are the driest, damaged areas). The ends of the processed strand are also trimmed by 2–3 mm.

After working with the curl, its condition is assessed. If necessary, repeat the steps. As the compartment for cut areas fills, it is emptied. When a satisfactory result is obtained, the strand is fixed with a clamp, the next one is separated, and the procedure is repeated.

Split ender preserves the length as much as possible, removing split ends along the entire length. You can actually carry out the procedure yourself. Although the manufacturer positions the device as professional, requiring skill.

However, the procedure cannot be performed too often. The hair begins to thin out and become thinner. As a result of the treatment, not only split ends, but also healthy areas of hair fall under the knife.

The machine is easy to use for both professionals and amateurs. The device does not require an electrical outlet. It is convenient to take it on a trip.

Haircut with flagella

At first glance, there is nothing complicated about “flagella”. The master takes a strand, rolls it into a tight strand, and processes it along its entire length with scissors. This technology can be repeated at home. It’s just that in the salon, not ordinary scissors, but electric scissors are used to cut split ends. During the exposure process, the instrument heats up.

Note, The complexity of the procedure lies in the skill of using the device. The main catch: the correct comparison of the condition of the hair and the heating temperature of the instrument.

An excessively high rate is fraught with deterioration in the condition of the curls. Instead of a positive effect, you can get a mop of hair burned along the entire length.

In addition to cutting off the split ends sticking out in different directions, the length is trimmed. At the end of the procedure, the master runs a heated tool along the canvas, sealing the ends. As a result of successful work, the client receives smooth, shiny hair that remains attractive for up to 4-6 months.

It is impossible to carry out such a procedure on your own. You should think about whether you should cut your own hair? You can use a similar technique with regular scissors, but the effect will be less lasting and striking.

Thinning

With the help of thinning, you can not only give your hair the desired contour and volume, but also process sloppy ends. You won’t be able to perform the procedure on your own: there is a risk of ruining the shape and aggravating the situation of split hair.

Processing of ends using thinning scissors is carried out in the following ways:

  • horizontal cut;
  • vertical elaboration;
  • removing the length using “teeth”.

Horizontal cutting of strands will allow you to achieve a natural perception of the haircut. To remove cut ends, processing is carried out along the length of the split. The strand is pinched between the index and middle fingers. With a slight movement of the hand, the hair is pulled down and a cut is made in the horizontal direction.

For vertical processing the strand is pulled vertically to the side (focusing on the parting). The thinning scissors do not close completely. The haircut is done with light sliding movements from the base of the hair to the ends. As a result, the strands receive a pleasant roundness, and the transition between tiers of a layered hairstyle is softened.

Processing with “teeth” It is carried out contourally, along the entire perimeter of the haircut. The hair is cut straight at a 45 degree angle. The result of the technique is a slight blurriness and carelessness of the hairstyle outline.

Preventing Split Ends

  • nutrition (saturate the diet with healthy foods or introduce a vitamin-mineral complex);
  • drinking regimen (at least 2–3 liters of liquid daily);
  • healthy sleep (eliminate lack of sleep, stress);
  • proper hair care (washing, drying, styling).

Important! It is advisable to give your hair extra attention. Especially in the period 1-2 weeks after cutting (while the rods are in a vulnerable, injured state). They produce intensive hydration and nutrition using folk or industrial cosmetics.

To prevent additional injury, it is recommended to cut with hot scissors. A standard tool leaves an open tip after cutting. This is a “gate” for various negative influences. When using hot scissors, the tips are sealed.

An option to preserve the result achieved by a haircut: implementing salon procedures to artificially seal the hair. The most popular of them are lamination and shielding. The hair is treated with special compounds that nourish, moisturize, and create a durable protective film. The effect lasts for about a month. The procedures allow you to “glue” split ends together and protect them from splitting.

Sooner or later you will have to get rid of split hair. It is better not to bring the situation to the point of cutting off significant length. The most successful option: a preventive haircut in combination with measures that protect the problem from recurrence.

Useful videos

Hair polishing at home.

Fight against split ends of hair!

6 514 0

Hello! In this article we will talk about how to cut the ends of your hair yourself, why this is done and how to carry out the procedure at home.

Every girl who takes care of her appearance and hair knows that it requires regular care. One of the mandatory items in hair care is cutting the ends. This procedure allows your hair to look well-groomed and healthy. There is also an opinion about the accumulated energy load, which is removed with a haircut.

Split ends must be cut off without fail, since they cannot be cured, and the rest of the healthy hair may be damaged if this is not done.

How often to trim the ends of your hair

The ends of your hair should be cut as soon as they become thin or begin to split. If your hair is thin, then the ends will thin out faster, in which case it is recommended to cut your hair once every 2-3 months. If your hair is thick and strong enough, then once every 3-4 months is enough.

How to cut the ends of your hair yourself

You probably often ask yourself questions about how to save money and time spent on an expensive salon on hairdresser services, how to not depend on the opinion of the hairdressers and choose exactly the length you want? One solution to the problem is to cut the ends of your hair yourself.

What you may need for this:

  • straight hairdressing scissors (the option with a standard sharpening is suitable; stationery scissors will not work!);
  • thinning scissors for neat thinning of hair;
  • special hairdressing level;
  • two mirrors - large and smaller;
  • hairpins and elastic bands, you can buy clips;
  • straight, fine-toothed comb and brush;
  • water spray;
  • hair straightening iron;
  • hot scissors for split ends (such scissors are plugged into an outlet, only the blade is heated, and when cutting, the tip of the hair is sealed, which allows it to retain moisture and prevent subsequent split ends).

You won't necessarily need all the tools. The choice will depend on which cutting method you choose and whether you want to add any additional effects or styling.

Method 1. Classic length alignment

This cutting method is suitable if you plan to cut your own hair for one of your friends or relatives with longer than average hair length. It will be difficult to cut your hair this way. The haircut can be done either with classic hairdressing salons or with hot scissors. The latter are effectively used to get rid of split ends.

  1. Before you start cutting, your hair should be clean, damp and completely combed. During the process, ensure that the head of the person being cut is held level to achieve the desired level of length and evenness.
  2. Start from the back of the head, separating a strand about 2 cm wide from the total mass of hair (for thick hair - 1 cm), secure the remaining ones at the top with a clip. Carefully comb the selected strand with a straight-toothed comb and cut the length as required.
  3. You can equalize the resulting row by cutting off the remaining rows of hair, which should be separated in a manner similar to the previous row - in strips of 1-2 cm.
  4. If your hair gets dry, moisten it with water from a spray bottle. After cutting, rinse your hair again.

Since the hair is wet when cutting, keep in mind that after drying, its length will be slightly longer than when it was wet. As a result of this haircut, you should have smooth hair of the same length.

Method 2. Head down haircut

If you want to decide to cut your hair yourself and cut your hair evenly, then choose this method! It is well suited for hair of any length.

  1. Rinse and partially dry your hair, leaving it fairly damp.
  2. Comb your hair well with a comb, head down.
  3. Carry out the haircut with classic scissors, remaining in the same position - head down, hair hanging straight down. No strands are separated.
  4. Cut your hair as evenly as possible, periodically combing your hair to check. It is advisable that you can see your hair and the result of your work. The recommended cutting direction is from left to right.

To minimize post-process cleanup, before cutting, place polyethylene, paper or fabric in the cutting area, which can then be disposed of.

Method 3. Comparison to specialized level

There is a special barber level for those who like to cut their own hair. This type of tool is not usually used in salons. The level is a compact size clamp; there are levels for bangs (smaller) and for the main volume of hair.

  1. A haircut with this tool is well suited for straight hair. If your hair is curly, it is better to straighten it first. For example, using a special iron.
  2. On your head, exactly in the middle, make a parting, dividing the entire volume of hair into 2 parts.
  3. Connect the right and left parts of the hair under the chin and put on the level so that it is held evenly, horizontally and at a height that matches your wishes for the subsequent hair length.
  4. Cut the length along the bottom edge of the level; take this point into account when installing it.

To shorten your bangs with a level, secure it to it. Installation can be either straight or oblique, depending on your wishes. Also take the length along the bottom edge of the level.

Method 4. High ponytail

This method will allow you to quickly give yourself a cascade haircut, which has been popular among Russian fashionistas for a long time. It allows you to highlight the features of your face. Cascading haircut is suitable for straight and curly hair.

  1. Before getting a haircut, your hair should be clean and slightly damp and should be well combed.
  2. Gather your hair into a ponytail close to your forehead (on the top of your head). Secure the tail with a thin elastic band. This should be a special hair elastic; rubber bands will not work as they can damage your hair. The tail can also be fixed with a hairdresser's level.
  3. Use scissors to cut the resulting ponytail to the length you planned.
  4. If your hair is thick, do not completely grab the entire ponytail to avoid uneven haircuts, and also profile the ends with special scissors. This will give your hair extra lightness.

Method 5. Low ponytail

This is one of the easiest ways to remove short lengths of your hair yourself.

  1. Carry out the haircut on clean and well-combed hair.
  2. Gather your hair at the back of your head at the very bottom, at the neck, exactly in the middle. Secure the ponytail firmly with a hair tie, a thin one will do. The tail should be dense and smooth, nothing should stick out.
  3. The resulting tail can be moistened with water from a spray bottle and combed well.
  4. Provide additional fixation of the ponytail with thin hair elastic bands, tie them at equal distances from each other - every 2-3 cm. The last elastic band should be located at the level to which you want to shorten your hair.
  5. Cut the hair evenly under the last elastic band. Use classic scissors, but if your hair is very split, then this haircut can be done with hot scissors.

This is a very simple method that takes a minimum amount of time and gives a good result in the form of beautiful, well-groomed hair.

Method 6. Twisting into a tourniquet

To give your hair lightness and playfulness, use this simple method, it won’t take much time either.

  1. Before cutting, make sure your hair is clean and well combed. They can be washed in advance; this haircut does not have to be done on wet hair.
  2. Raise all combed hair to the very top of your head and twist it into a tight rope. If there are hairs left behind and fall out of the overall strand, it’s okay, leave them.
  3. There is no need to secure the tourniquet with clamps or rubber bands; hold it firmly above your head with one hand. With your other hand, cut to the required length, then release the hair and comb it thoroughly.
  4. Re-gather your hair into a similar braid, but now twist it in the opposite direction. Again, no need to fix it. In the resulting bundle, trim off any hairs that will stick out.

This method is perfect for long and medium length hair.

Method 7. Two tails from below

This solution will help you save maximum time on the haircut process.

  1. Divide clean, combed hair into a parting so that you get 2 identical parts of hair on the left and right.
  2. Secure the resulting halves tightly into ponytails on the sides with thin hair bands. Lower the elastic to the length you plan to cut.
  3. Make the cut under the elastic bands from the edge to the center. To make the edge of the hair look as natural as possible, try to tilt the scissors at an angle of approximately 45 degrees when cutting.

After cutting, rinse your hair in warm water with shampoo; if necessary, to save time, dry it with a hairdryer using a brush. As a result, the back of the haircut will have a V-shape.

Method 8. "5-6 tails"

This is a rare cutting method that will require a little more time and patience, but the process will undoubtedly bring you pleasure.

  1. Before cutting, your hair should be clean and damp, but not damp.
  2. We divide the head into 6 zones:
    - occipital - hair below;
    - bangs (if you have them);
    - 2 equal parts at the top of the head on the left and right and 2 similar parts to the occipital area.
    If you don’t have bangs, then there will be only 5 zones.
  3. Secure each zone into a tight ponytail with elastic bands.
  4. Using straight scissors, cut the ends to the required level. Cut the same length from each ponytail (except for the bangs).
  5. The hair that is loose after this haircut can be trimmed a little with thinning scissors and once again see how the bangs fit. If necessary, further trim it with straight scissors or profile it.

Before choosing one method or another, be sure to watch the following video.

Detailed video instructions on how to cut your hair straight. The tips combine all the methods listed above.

To be fully prepared and do everything right, we offer some more useful tips:

  1. If you want the effect of the haircut to last for a long time and your hair to grow more slowly, then cut it during the waning moon; if, on the contrary, you want it to grow faster, then cut it during the waxing one. Therefore, cutting the ends of your hair is acceptable even if you are growing your hair.
    Read:
  2. You can see how the hair lays at the back after the haircut, whether everything is done smoothly, or a second mirror will help you check the quality of the styling. Take a medium-sized mirror and place it behind your back, find a position that will allow you to see the back of your haircut in the main mirror.
  3. To cut your hair yourself, you can use a life hack for visual assistance: cut dark hair against a light background, and light hair, on the contrary.
  4. To reduce split ends, place straight hair scissors at an angle of approximately 45 degrees. If you have hot scissors, it is better to use them.
  5. If the ends are split, then cut the length about 2-3 centimeters above the place where the hair begins to split.
  6. Another method for removing split ends is to twist the hair (in small parts) into small tight strands, and cut off the hairs sticking out of the strand with regular hairdressing scissors with a good sharpening. And so on in turn throughout the head.
  7. If you are cutting curly hair, it should be moistened much more intensely before cutting than straight hair.
  8. Trim the length of your bangs depending on the speed of their growth, approximately once every 1-2 months. So that it looks aesthetically pleasing and does not interfere with your view and does not get into your eyes.

How to trim your ends less often

  1. Try to use curling irons, flat irons and hair dryers less, because... they spoil the hair structure. The ends take the hit first: they dry out, become thinner and, as a result, need regular trimming.
  2. Do not use tight elastic bands.
  3. Moisturize and nourish your hair more often with. And also use hair conditioner.
  4. Don't wash your hair with hot water.
  5. Use shampoos based on your hair type and for split ends.
  6. Do not rub your hair after washing, but pat dry with a towel.
  7. Use gentle hair dyes or use.
  8. Drink more water and eat right - hair is a reflection of our body.
admin

Many girls, growing long hair, mistakenly believe that trimming the ends is not required. But this is a fundamentally wrong belief. For health and rapid growth, you need to visit the hairdresser regularly.

How often to trim the ends of your hair

Beautiful well-groomed curls are a woman’s pride. There is hardly a single lady who likes dry, lifeless hairs sticking out on her head. Sometimes hair health is inherited, passed from mother to daughter. But more often this is the result of regular proper care for them. And these are not only masks, balms, conditioners, expensive shampoos, but also a visit to a beauty salon to trim split ends. How often does your hair require this procedure?

On average, hair length increases by 1-2 cm every month. It is a mistaken belief that since hair grows from the roots, the ends do not play a role in the speed of hair growth. But that's not true. When the ends split, that is, they bifurcate, they become brittle and dry. Hair constantly gets tangled, becomes electrified, and loses its original shape.

Removing these virtually dead particles of hair helps to revitalize it along its entire length. Thus, growth is enhanced. Therefore, if you want to grow a beautiful mane on your head, visit a hairdresser once every 2-3 months. It will eliminate all unevenness and straighten the haircut. This applies to long hair.

If you wear a hairstyle of medium or short length, then you should visit a hair guru more often, since the growth of length on short hair is more noticeable than on long hair. It's unaesthetic.

What causes split ends of hair

Split ends are the oldest part of the hair. They were tested by wind, rain, snow, styling products, elastic bands, hair dryers and other feminine things.

They look unaesthetic. The hairstyle changes shape, the hair becomes dull, and there is a clear lack of life-giving moisture in it. If you start it and don’t cut or treat the curls, then the section reaches the middle of the hair. Therefore, when you come to the hairdresser, you will have to cut 10-12 cm from the entire length of your hair, and this is a lot.

Frequent perms, hair coloring. When curling, chemicals are used that destroy the structure of the hair and disrupt the water balance inside it. After carrying out such a procedure, you should regularly use care products that are designed for colored and curled hair. With frequent dyeing or incorrect selection of dye (too aggressive components), the hair loses its vitality, becomes dehydrated, and becomes dull. The dye on such hair lasts for a month at most. It is better to have your coloring done by a hairdresser; he will select the appropriate tone and advise you in the future on what to use for care. It will help not only keep the color rich for a long time, but also keep your hair healthy.
Blow drying, using styling products. To quickly finish the procedure of drying hair after washing, we turn on the hottest mode, from which the hair begins to practically melt. The regularity of these manipulations leads to drying, thinning, and brittle hair. It is advisable to turn on the medium mode, and ideally dry with cold air. It won't harm your hair, although it will take a lot longer. But the hair will remain in a healthy state. Using styling products that contain alcohol quickly dehydrates your hair.

Hair care products

In cosmetic stores and pharmacies you can find many products with restorative complexes. They are created specifically for the care of split ends. Replenish vitality, moisture, protect from the negative effects of external factors: weather, styling products, hot air from a hair dryer.

There are also special hair styling products that are applied to the ends. They are protected from a hair dryer and help in recovery after aggressive styling and coloring.

They cope well with the problems of split ends. Homemade ones are especially good; you don’t have to spend money on expensive cosmetics; nature gives us all the benefits. Therefore, scratch the bottom of the barrel, perhaps there will be vegetable oil there, for example:,. All these oils are ideal for hair. They are used as an independent care product or included as one of the components of masks.

Apply slightly warmed vegetable oil from the ones suggested above to dry hair and distribute it throughout the hair. This can be done both from the very roots and from the middle or to the very ends where there is visible damage. Such masks are applied for at least 30 minutes. But ideally for a few hours. If you can do it on a weekend, be sure to do it. After application, secure your hair with an elastic band or bobby pin to prevent the oil from staining your clothes.

Be sure to pay attention to your diet. It should contain 1.5-2 liters of water, which fills the hair with moisture. For hair growth and shine, eat omega-3 and omega-6 fatty acids, vegetable oils, nuts, avocados, and fish. But don’t overdo it with the quantity, you can gain weight. Remember - everything in moderation! Reduce the amount of sweets.

How to trim the ends of your hair correctly

It's not always possible to get to the hairdresser. Either there are no funds, they have not found a worthy candidate, there is no time. The reasons are different for everyone. Therefore, girls are wondering how to properly trim the ends of their hair at home. This will save money and time.

Preparation:

Buy sharp, preferably professional scissors. Blunt ends will only damage the hair structure, and it will begin to split prematurely. Therefore, if you plan to regularly carry out this procedure at home, take care of the main equipment.
High quality comb. Take 3. One with rare teeth for carefully separating hair strands, the second is a brush with natural bristles for daily care, the third is round for styling.
Large mirror. You will need a mirror while cutting. You should be able to fully see your head and the entire length of your hair. Otherwise, it will be inconvenient to carry out a haircut.
While cutting, you will need clips or bobby pins to hold the hair strands in place.
If you are cutting on dry hair, you will need a spray bottle of water to wet it.

Many people find it convenient to cut their hair when it is wet. Therefore, after washing your hair, that’s it. But if you feel so uncomfortable, do as you please.

It is much easier for those people who wear simple haircuts with straight ends. But if you have torn ends, ladder and other haircuts of this kind, then you won’t be able to cope without the help of a professional. Therefore, if you are going to do your own haircut for the first time, it is better to visit a hairdresser.

Stages of haircut with straight ends:

Wash your hair with shampoo and conditioner to make your hair soft and manageable.
Dry your curls a little with a towel, but do not rub them so as not to damage them, just blot lightly.
Comb your hair thoroughly so that it lies flat and free of frizz.
Make your usual parting that you wear.
Collect the upper part of the hair from the parietal lobe using a wide-toothed comb and secure it to the crown with a hairpin.
Divide all remaining hair into 2 halves from the back with your hands.
Separate one strand on the left side, comb it with a comb and fix it between your fingers with great tension.
Cut off the excess along your fingers along the hair.

Do this with each strand.
Release the top collected hair and distribute it along the parting.
Do the same things with them as with the lower part of the hair.
To make the strands even, grab the already cut hair with your fingers and attach the unprocessed hair to it. This will show you how long to cut your hair.
Comb your hair and inspect for any imperfections. Then dry them with a hairdryer.
After drying, it is also worth going through the entire length with scissors, as the hair may lie a little differently than when wet.

By cutting your hair at home yourself, you will save money, time and nerves when choosing a competent specialist who will follow your wishes.

8 April 2014, 16:42

Carry out hair moisturizing procedures frequently and efficiently. Don't forget to use conditioner after shampooing your hair. Hair can start to split for a variety of reasons, but the most common cause is lack of hydration.

  • Use a conditioner that suits your hair type. For dry hair, it should contain natural oils (shea butter, coconut oil, etc.). Apply conditioner to the ends of your hair, not to your scalp. For oily or fine hair, use a light conditioner and apply it very gently near the scalp.
  • Moisturize your hair at least every time you shampoo. Hair is made of protein and requires nutrients just like any other organ in the body. Use shampoo every other day and be sure to use conditioner afterwards.

Lock the moisture of water and conditioner into your hair. You've worked hard to moisturize your hair, so don't let the moisture go to waste. Use products like shea butter, olive oil, coconut oil to retain moisture in your hair.

Protect the ends of your hair when styling your hair. Lift your hair when styling your hair into a bun to protect it from drying out and damaging it. After showering, some people prefer to let their hair dry naturally by twisting it into a bun at night.

Moisturize your hair more deeply. This needs to be done at least once a week or so. Deep moisturizing treatments will give your hair more moisture and protection, so if you don't shampoo or condition your hair for 2-3 days afterwards, your hair will likely retain plenty of moisture.

  • Avoid excessive hair damage when styling your hair. Usually, those people who have healthy hair have a habit of avoiding an excessive number of procedures when shaping their hairstyle.

    • Beware of burning your hair. Damage from hot hair straighteners, for example, leads to split ends. Set your hair dryer to the lowest setting when drying your hair. If possible, allow your hair to dry on its own after you shower: lightly pat dry with a towel, apply a detangler, lightly comb through, and let dry.
    • Don't comb your hair while it's wet. Hair has a very high chance of breaking when it's wet, so be careful. On wet hair, use a wide-toothed comb to reduce the risk of split ends and other damage.
  • Related publications