Dressing gowns for women's home pattern. How to sew a dressing gown without a pattern: different techniques and models

Universal home clothes can and should be aesthetic, individual and interesting. Therefore, it is worth spending time on its independent production. An excellent option for such clothes can be called a bathrobe. Practical and comfortable, it will help in creating coziness "near the family hearth." Among its advantages - a variety of styles and ample opportunities for decoration.

A dressing gown is a shoulder garment that is fastened from the neck to the bottom of the product with buttons or with a flared side. Covers the trunk and legs partially or completely. This item is considered clothing for home and leisure, has no gender and age characteristics. It is worn by men, women and children. A kind of women's dressing gown is a peignoir.

Experienced craftsmen even create fantasy products from silk and satin fabrics, decorate them with lace, frills along the side, pleats along the neckline, make darts and detachable coquettes. The result is a design model. But even with little experience in tailoring, you can design an individual pattern of a home dressing gown and make a comfortable and presentable thing. There are many simple styles that do not require laborious drawings.

Most robes are designed according to the classic dress pattern, adjusting it in size, adding the necessary details (cuffs, belt, hood). Home clothing is good because it does not require rigid canons - you can trust your instinct and imagination. Of the mandatory steps - for example, the calculation of fabric. The amount of matter is adjusted for the volume of the chest (especially if it exceeds 100 cm), the shape of the sleeve, the freedom of fitting.

walmartimages.com

The history of the appearance of the bathrobe

In modern fashion, the bathrobe has become a household item of clothing worn after showering and for relaxing. He became, first of all, the personification of elegant women's underwear and an item that is worn on a wet body.

The history of the dressing gown began many centuries ago in the East. The name is of Turkic, Arabic origin and means "clothes". It was, as a rule, outerwear for men, protecting from all adverse factors: heat, wind, cold.

pinterest.com

In Europe, robes were traditionally worn at home as an intermediate step between underwear for sleeping and attire for going out. This type of clothing was of greater importance in the upper strata, it was possible to take breakfast with the family in it. Peasants, of course, did not have such household items.

Types of bathrobes

A variation of a cut similar to an oriental robe is Japanese kimono clothing. Some modern models of home wear and peignoirs have taken this historical type of product with wide sleeves as a prototype. A kimono robe is always without a fastener, but has a wide side and is tied at the waist.

prom.st

There are also gowns, which are special clothes: for doctors, laboratory assistants, cooks, workers. Each profession has its own standards for workwear as a uniform. For example, a kitchen worker's coat should be white, a technician's coat should be gray or black, a loader's or warehouse worker's coat should be blue.

The most comfortable and common model for wearing at home is a wraparound bathrobe. The free silhouette does not restrict movement, the wide front side gives freedom of step, the absence of a fastener makes it easy to put it on and take it off.

This model is worn by everyone without restrictions. The silk option is suitable for girls who love long breakfasts and weekends at home. A shortened product made of dense velveteen, cotton gabardine, silk will appeal to men who work at home in the office. Traditional terry robes are worn after waking up and taking a bath, adults and children, regardless of age.

zara.net

Pattern of a homemade dressing gown for the smell

To sew such a product on your own, you need to understand how to build a pattern for a classic women's wrap dressing gown. The model is made of flowing satin fabric or not very thick terry cloth. Freedom of fit allows you to use almost any base for further modeling. The design of the shoulder product is taken as the basis for the construction. It can be the base of a dress, a blouse, even a light jacket with a soft shoulder line or a coat.

mccall.com

1. On the existing base, it is necessary to expand the half horizontal dimensions to the value of the Half-girth of the chest + 8.0-12.0 cm. The increase depends on the model and the selected fabric.
2. Line up a straight vertical line through the widths along the chest, waist, hips, to the bottom line.
3. Close chest tuck. Level the shoulder and waist darts.
4. Lengthen the line of the shoulder slope to 15.0-18.0 cm.
5. Build a new, straightened armhole, deepening it to 25 cm or more.
6. Modeling on the basis of the sleeve. Expand it across the entire width according to the model.
7. Construct a new armhole according to the length and shape of the armhole.
8. On the shelf, carry out modeling to design the line of the board and the smell. To do this, draw a line from the point of the base of the neck to the corner of the waist line / side seam. Depending on the model, the edge of the finished bead may reach the side seam or be slightly shorter.
9. Check out a new neck line, with the transition to the board.
10. Depending on the model, draw the design of the side and neck. The edge of the side and the neck can be finished with either a hood or a shawl collar, turning into a pick, or a decorative edging, equal in width to the removed belt.

kroikashitie.ru

Sleeves and details

In dressing gowns of traditional models, set-in sleeves are used. They are designed according to a single-seam base pattern, copying the contours onto paper. The length is adjustable according to size and desire - as a rule, it is 7/8 according to the basic scheme. On the sleeve, you can make a turn-down or tuning cuff. It is necessary that its length be equal to the width of the finished element, so it is better to cut it out after trying it on. For turn-down varieties, an allowance of up to 1 cm is made to ensure freedom of fitting. If the fabric is voluminous, the armhole is further deepened.

To calculate the length of the belt, you need to measure the waist circumference and add up to 50 cm for tying. To prevent the left shelf from sagging, additional ribbons are made into the seam for the selection from the inside. The patch pocket, like the belt, is cut out separately, rounding the corners along the bottom, and stitched 12-15 cm below the waist. The hood in a dressing gown is more often a decorative detail, but you can replace the collar with it. The long side is equal to the neckline along the back plus two lengths of the top of the shelves, and the short side is equal to the height of the shoulder plus allowances for seams and a loose fit.

Without a pattern, it is possible to model a dressing gown directly on the fabric. The cut of the selected matter is folded in half, forming the median axis of the back along the fold. A segment equal to ¼ of the circumference of the chest is laid off from it with an increase in freedom of fitting and seams.

Progress

1. Draw and cut the neckline - 2 cm from the back, 7 cm from the front.
2. Draw a line along the shoulder with a 2 cm bevel.
3. Adjust the length of the shoulder on the back and front - they should be equal.

So that the thing does not turn out to be narrow in the chest, an overlap is made in this zone - a fold or assembly. If a belt is supposed, it is cut out from the main fabric, cutting off along the bottom of the canvas.

edinstvennaya.ua

A bathrobe is a traditional cozy clothing for the home, which is easy to sew with your own hands. Simple design and cut do not require deep knowledge and special skills. By choosing a high-quality fabric, you can create a product that is worn not only after a shower, but also as comfortable beautiful clothes for the home.

here is an explanation of how to work with patterns through the AutoCad program,

/static.oscdn.net/30/templates/osinka/images/exclamation.png" target="_blank">http://static.oscdn.net/30/templates/osinka/images/exclamation.png"); background-position: 100% 0%; background-repeat: no-repeat;">

Well, let's try. Let's start from the beginning, shall we? Have you opened the program? Then File-Open and select the desired pattern, we get this image:

Next, do you see among the cut out a small square? Did you mark it with an arrow? We work with him. Select the Pointer tool on the left panel, select this square and see what size it is: on the top panel, I highlighted the size in red - 2.5mm x2.5mm Right? Now we need to make this size 10cm x 10cm, i.e. 100mm X 100mm. We do it this way: in the panel on the right, click on Transform and enter Scale 4000 and 4000. As in this picture:

Click apply and see what happened to our square and with it and patterns:

Well, that seems to be all. Girls, a huge request: I myself have not yet printed it all out, I want to do everything at work, so post the results, who will print it, as well as all the complaints and comments in general. If not, I tried.

Source: http://club.osinka.ru/topic-43152?start=15

Calico

A very modest-looking dressing gown made of chintz. Comfortable and loose, with large patch pockets. The waist line is underlined with braid. Turndown collar. Suitable for girls with sizes from 46 to 50. Pattern in the first picture.

Robe dress

This model looks impressive both at home, and in the country, and on the beach thanks to its bright colors with a colorful, interesting pattern. It leaves a very pleasant impression, easy to sew. The large bow and frill make it look more personable. Suitable for girls from 44 to 46 sizes.

Pajamas - a gentle echo of childhood, nostalgia, the most comfortable type of sleepwear. Depending on the time of year and the temperature in the room, it can be sewn from warm or light fabric. The model in the upper picture is intended for women and is sewn from chintz. The blouse is made in a free form. Before on the coquette. The yoke line, the bottom of the sleeves, the neckline are processed with a roll or sewing. The recommended size is 48.

The model for a girl is sewn from delicate flannel in the tones of the bed range, conducive to a sweet dream. Trousers are made on an elastic band. Blouse - with a stand-up collar. The planochka along the fastener line is cut out along the transverse line. Size 42 - 46.

Pattern of a dressing gown for overweight women with buttons

We offer you to use a wonderful pattern of a dressing gown in sizes 52 - 56. The material used is ordinary cotton fabric. Shelf with supply barrels. On the waist line - uncut. Patch pockets, the bottom of the product, the neckline are processed with braid. For sewing a product of size 54 of the fourth growth, you will need 3 m. 20 cm of fabric with a width of 90 cm.

Pattern of a dressing gown with buttons from a magazine

This model is proposed to be sewn from nylon or silk fabric. The dressing gown fastens with a button, the shelves are made on yokes, with the help of which soft gatherings with a deep smell are formed. The model is detachable along the waistline. The sleeves are gathered at the collar. The yoke is stitched. The dressing gown is calculated on 44 - 50 size. Size 48 requires 3 m. 30 cm of fabric with a web width of 90 cm.

For young girls and girls, a sundress made of chintz or satin can be recommended. In appearance, this pattern resembles a dress, but for a number of characteristic features, it should still be attributed to sundresses. The bodice is made on the shoulder straps, the skirt has a luxurious shape, expanding downwards. A sundress can be complemented with an elegant cape. The size is aimed at girls from 44 to 48 sizes. Fabric consumption for size 44 - 3m. with a web width of 0.85m.

Dress-robe made of cotton

The pattern of a cotton dress-robe is designed for girls with a full figure. One-piece model with sleeves, not detachable at the waistline, with soft gathers. The dressing gown consists of the following main details: patch pockets with flaps, stitched fastener straps, pointed collar. The size is designed for girls from 44 to 56 sizes. Fabric consumption for size 48 with the third growth is 4 m with a main fabric width of 80 cm.

Blouse and skirt for summer

A pattern from a magazine - a sundress with a blouse, made of light summer fabric. The blouse has an airy, free form. Elasticated along the waist line. Clasp fastening, kimono sleeve. The sundress is sewn on wide straps, with a semi-adjacent silhouette, smoothly expanding towards the bottom. Recommended sizes are from 44 to 48. Consumption for size 48 with the third growth is 360 cm with a fabric width of 78 cm.

Blouse and skirt for summer pattern

A blouse and skirt for summer make up a light summer set for relaxing. Material - cotton fabric. As you can see in the picture, sleeveless blouse with a yoke, straight cut. The placement of the fastener is unusual - shoulder seams. The waistline is accentuated with a belt. Skirt - expanding downwards, has a through fastener. Estimated sizes from 44 to 48. Material consumption - 3 m 70 cm with a web width of 80 cm and a third growth.

Denim sundress and blouse

Before you is a pattern of a plain denim sundress, rather even a set, since a blouse pattern is attached like a men's shirt with straight sleeves. Sundress with shoulder straps, semi-adjacent silhouette. Skirt - four-piece. The sundress fastens with a zipper. The waist is accentuated with a belt. The bottom of the sundress, neckline, pockets, straps are finished with contrast stitching.

Free blouse patterns

Patterns of youth blouses, distinguished by their character. Products can be sewn from both silk and poplin.

Tight-fitting blouse is made without sleeves. The vertical embossed shelves stand out beautifully on it. A back on a drawstring, one-piece cut. A rubber thread is threaded into the drawstrings. The shelves are made with a detachable peplum. Most of the elements of the blouse, such as the cutout, the bottom, the stitching line of the peplum, are trimmed with a roll from the main fabric. As a decoration - cotton lace.

Another model of a sporty character, on a yoke. The sleeves are straight, with cuffs. The collar is typical, as on a shirt. There are two patch pockets. Blouse details are stitched.

Estimated sizes of blouses from 44 to 52.

The fabric consumption for the first blouse for size 48 and the third height is 1.45 m with a width of 1 m. For a sports blouse, the consumption will be 2 m 60 cm with a web width of 90 cm.

DIY sundress and beach set

Sundress do it yourself and a beach set pattern from a magazine

Another youth model that is relevant at all times is a sundress with a detachable skirt. The fabric on the back is gathered with rubber thread, the bodice is made on a wide bodice. Along the perimeter, the model can be trimmed with a beautiful edging or rudder. In the beach version, a light panama protect from the rays of the sun.

Estimated sizes are from 44 to 48. With the third growth and size 48, the fabric consumption is 2 m. 80 cm with a width of the fabric web 80 cm. Finishing will require about 70 cm of fabric.

A beach set consisting of a swimsuit and an original free-form skirt will harmoniously fit a light sundress. The skirt has gathers at the waist, a zip fastening and a slit at the back. Like a sundress, the recommended sizes are from 44 to 48. The fabric consumption for size 48 and the third height is 2 m. 95 cm with a web width of 82 cm.

Dresses from the 60s from old magazines

Here is a ready-made pattern for a 60s summer dress for outdoor recreation. Cotton dress - a sundress is made without side seams and a back with a deep smell. There is a center seam and a front slit. The neckline and neckline are beautifully framed with a decorative trim that crosses on the back. The dress itself has a colored rudder edging. Looks good with a scarf-shawl. The author recommends this pattern for women with sizes from 44 to 50. Fabric consumption for size 46 and the fourth growth is 5 m with a width of 75 cm. Finishing will require about 1 m. 10 cm with a width of 78 cm.

SILK DRESS FOR FAT LADIES FROM THE MAGAZINE

And one more dress for full girls. Like the previous model, it is made of silk, uncut along the waistline. The snug fit hides volume due to its design lines. In these lines there are pockets with a leaflet. You need to purchase a zipper. As in the previous version, the collar is cut according to the apache type. In its original form, the author complements the design with a beautiful bow. Size for obese women from 52 to 56. The consumption of the main fabric with the selected size 54 and the fourth growth is 4m. 50 cm with a web width of 100 cm.

MAGAZINES WITH DRESS PATTERNS

Leafing through the pages of old magazines, one cannot fail to notice a pattern of a silk dress with a jacket for obese women. The dress itself is made without sleeves, detachable along the waistline, with a cutout of a square of medium depth, with stitched barrels. The skirt is stitched to the middle of the thigh, deep one-sided folds are located in front. A jacket with deep tucks in the back of an adjacent silhouette due to the vertical reliefs of the shelves. The collar on the jacket is apache, without a fastener. Pattern sizes are designed for large sizes 52 - 56. Fabric consumption for size 54 is 3 meters with a width of 100 cm and a fourth growth.

From an ordinary terry sheet measuring 180 by 130 cm, you can sew a dressing gown with a hood. There is only one condition - the measurement of the circumference of the hips should not exceed 110cm, otherwise the robe will not fit in width.

The design of the bathrobe is extremely simple and economical: not a single centimeter will go to the rags.

Fold the fabric across and mark the center center line. From it to the left and to the right, set aside ¼ measurements of the circumference of the hips. Mark the length of the product, the length and width of the sleeve, how to do this can be seen in the drawing. Cut the armholes and shoulder seams, cut out two squares measuring 17 by 17 cm - they will go to pockets or gussets if you want to make the sleeves looser. Please note: there is no need to make an incision along a 16 cm long line - the hood and the robe are connected here.

Sew into the armhole. Then stitch the shoulder seam and the sleeve seam at the same time - they continue each other. Sew the corners of the hood and sew the bottom of the hood to the neck. The floors of the dressing gown and the bottom can be edged with braid or hemmed on the machine with a zigzag seam.

The bathrobe can be made long, but then the sheets are not enough, you will have to use the usual terry cloth.

The armhole (the place where the sleeve is sewn to the “body”) is half the width of the sleeve. Naturally, where it says "armhole", you need to make an incision.

As in the designer - cut and folded. There will be no problems at all.

Information for those who like to dress beautifully and fashionably. I found an interesting website http://www.stock-center.ru, this is the official website of the Stock Center chain of stores, which have been leading the market for over ten years. Goods in stores for buyers with low and average earnings, but despite this, the models are very rare, high quality and beautiful. Here you can find branded clothes and at very low prices. Stylish ladies will not be disappointed by visiting the site, there are a lot of not only clothes, but also shoes and other goods. Shopping, as you know, is the best cure for depression, and if it doesn’t hit your pocket, then a great mood boost is guaranteed!

Good afternoon, dear readers!

Are you planning on making a new coat? I offer you a simple comfortable model with a smell and tell you how to sew a dressing gown without a pattern.

For those who sew well and a lot, sewing any clothes, especially a bathrobe, is not a problem.

This article will be useful for those who have the most basic sewing skills: they can hold a needle and thread and make a stitch on a sewing machine.
First, let's talk about how we dress at home? Tell us about it in the comments.

I think that a woman is a mother and a wife, and at home she should always remain a Woman with a capital letter, respecting and loving both herself and her family members.

And at home you need to look charming, beautiful, neat, well-groomed, stylishly dressed. No washed out robes and tracksuits, nightgowns and pajamas, all the more! Preference should be given to comfortable and beautiful home clothes - trousers with a T-shirt, a skirt with a top, and others.

But we still need a home dressing gown to put it on in the morning and get into the bathroom, from where we already go out like a queen!

And in the evening after taking a bath, women's dressing gowns will come in handy.

Let's try to sew a bathrobe with our own hands.

How to sew a wrap dressing gown

I like the comfortable model of a women's dressing gown with a smell, we quickly wrap it up and tie it up, neither the buttons are torn, nor the zipper gets stuck.

The proposed model, according to which I have already sewed 4 robes, but they are always different, it doesn’t even require a pattern!

Any material can be used, but it is best to use a soft fabric such as knitwear; such a chintz dressing gown can be slightly fuller.

How much material is needed

With a width of 150 cm, you need to take a length equal to the length of the bathrobe, and with a width of 75-80 cm - twice as much.

The wraparound bathrobe of the proposed model can be sewn in any size up to 52-54. For larger sizes, you will need to make additional inserts.

open the robe

Fold the narrow fabric in half across inside out, fold the wide fabric in half lengthwise inside out.

If the fabric is wide, we sew the dressing gown practically without seams, only the shoulder seams will be, and with a narrow fabric on the back, you will need to make a straight seam. In this case, we retreat from the edge of the fabric on the left 1.5 cm and draw a seam line.

I give explanations on cutting.

Neckline

From the side of the future back (left), from top to bottom, retreat 1.5 cm for the seam and another 2 cm - mark the depth of the neck.

From left to right from the top we measure 9 cm - the width of the neck.

We connect the marked points.

Robe width

We calculate the width of the robe as follows: divide the hip circumference (OB) by 2 and add 20 cm.

For example, OB \u003d 110cm, calculation: 110/2 +20 \u003d 75.

We measure from left to right the width of the bathrobe - 75 cm. For sizes from 48 to 54, this will practically be equal to the width of the material. For smaller sizes, cut off the excess fabric on the right.

Shelf cutout line

From the right, from top to bottom, we measure 1.5 cm per seam and the length from shoulder to waist (in my case -48 cm.)

From right to left, we measure 9 cm from the top - the width of the neck.

We connect the marked points with a smooth line, you can use a template, but it’s quite easy to do without it.

armhole line

Exactly in the middle of the fabric from top to bottom, measure the width of the armhole (1.5 cm per seam + 24 cm) and cut the fabric along this line.

bottom line

There is practically no need to measure the bottom line if the fabric is taken with a length equal to the length of the dressing gown. If there is more fabric, then we measure the length of the robe from top to bottom and draw a straight line at the bottom.

We cut out the robe along the marked lines.

From the remnants of the fabric, I also sewed a beautiful potholder in the shape of a heart.

How to sew a bathrobe

Sew up the seam on the back if it is with a narrow fabric), we process the seam with a zigzag.

We straighten the fabric and fold the back facing the front so that the lines of the shoulders are aligned. We sew the shoulder seams, we process them with a zigzag.

You can sample first!

A wraparound robe with small kimono sleeves dropped down is almost ready, all that remains is to process the edges and embellish.

I like to trim the edges of the sleeves, neck, shelves and bottom of the dressing gown with an oblique trim.

You also need to cut out and sew two halves of the belt and make a slit for it on the right side at the waist line.

Here is a bathrobe with a smell turned out pretty quickly and easily.

How to sew a bathrobe without a pattern, we figured it out. Simple and fast, right?

If desired, you can sew on the edges of the ruffles, sew on pockets, a collar, make long sleeves.

This dressing gown is very versatile: it can be tied up by wrapping it up, or it can be used as a peignoir by tying it in front.

You can sew a terry bathrobe for a bath according to this principle. Lots of options.

Did you like this idea to sew a house wrap with a smell with your own hands?

If you have any questions, write, I will be happy to answer and help everyone.

Even easier, you can try to sew a bathrobe on the principle of a plaid with sleeves. Come see the master class.

About new ideas for home publishing ahead. Follow the mailing list!

How do you dress at home?

INCE BLOG ARTICLES

Hello needlewomen. Wouldn't an extra robe hurt us? See how to sew a robe without a pattern.

A simple model of a home wrap dressing gown

A bathrobe is a very comfortable thing, and when you sew it with your own hands, it can become a real work of art. For the home, you can come up with such decorations that you will not go to people. But after all, the house also needs to be beautiful, well-groomed.

First, without a pattern, we sew a bathrobe with a smell. If you know how to hold a needle in your hand, then this is not a problem for you. Let shorts with a T-shirt remain your home clothes, but a home dressing gown will not be superfluous.

Why do you need to sew a little thing with a smell first? It is convenient because you can quickly tie it up without getting confused with the zipper and buttons, moreover, the buttons can come off, the loops can become unusable, but the straps or belt never!

How much material is needed

For this wardrobe item, you can take any material, but the dimensions should be as follows: with a width of 150 cm, take a length equal to the length of the product, if your size is up to 54, and if more, then 2 times more.

We calculate the width by the formula: POB plus 20 cm. POB is the half-circumference of the hips.

We do the construction of the pattern immediately on the fabric.

1. First, smooth the fabric well with an iron.
2. Lay out on the table.
3. We fold a fabric 150 cm wide in half inside out, a narrow fabric, 80 cm wide - across.
4. Finely draw the points of the future pattern.
5. On a narrow fabric, we retreat 1.5 cm from the left edge for the seam on the back.
6. We build a pattern on top.
7. From above we make an indent for the line - 1 cm.
8. From this indent to the right we draw a straight line
9. On this line, from the fold of the back to the edge, we measure 9 cm, and from the left corner we measure down 2 cm, put a point. We connect two points. This will be the neckline from the back.
10. Further to the right of the fold, we measure POB + 20 cm. At this mark, we draw a straight line from top to bottom.
11. We draw a cutout on the front shelf on it: it is necessary to measure the distance from the shoulder to the waist, put this value on a straight line.
12. On the upper line, laid horizontally, to the left of the edge, measure 9 cm, put a point.
13. We connect 2 labels.
14. The upper horizontal line must be divided in half.
15. Draw a straight line 26 cm down from this point.
16. On it we make an incision for the hands.
17. Next, cut out the details.

Tailoring

• We process the edges of the parts with a zigzag.
• We sew the back with a narrow matter.
• We fold the front and back face to face, combine over the shoulders.
• Roll up sleeves and hem.
• We sew a belt, 4 cm wide.
• We process the neckline and the edge of the front with a finishing trim.

You can also sew terry cloth bathrobe.

How to sew a dressing gown without sleeves and without side seams

Let's sew a little thing without sleeves, and even without side seams. Let's make the top seams between the back and shelves. And the sleeves, buttons will be replaced by a belt or a hidden fastener, so it is sewn very quickly.

The base of the robe is a simple rectangle. Width - (MN times 2) equals the circumference of the hips plus 8-10 cm. The NP segment is given by smell, equal to 15 cm on both shelves. Product length - any.

The height of the barrel (from the waist to the bottom mark of the opening of the sleeve) is 17-20 cm. Choose this size as you like. Choose the depth of the neck, too.

Let's start sewing:

• We will process the opening of the sleeve with a zigzag.
• On the top we sew the shelves and the back,
• We will process the neck, as well as the edges of the product.
• If you decide to make a hidden fastener, then place it at the intersection of the waist line and the vertical from point N.
• Treat the shelves and neck with ready-made finishing material.
• Bend the bottom.

Like Japanese beauties

Let's sew bathrobe-kimono.

The kimono robe is sewn loose with wide sode sleeves, certainly with a belt, the width closer to the Japanese obi is 10-15 cm. The pattern is very simple, consisting of 6 parts:

• One-piece back.
• Left and right shelves.
• Rectangular sleeves.
• Two belt pieces.

It is better to sew from silk, then you will look like a real oriental beauty.

The sewing order is the same as above, only the sleeves need to be sewn on. Sew a rectangle, then sew to the armhole.

Dear craftswomen, you will definitely learn how to sew like a real professional if you open the video where Irina Paukste gives lessons.

Good luck with your sewing!