Crocheted cap for a boy: master classes. Crochet cap for a boy: pattern with description and video Crocheted cap for a boy pattern

Another model of a knitted cap for a boy. Crocheted from wool blend yarn and decorated with a knitted headband with a large button.

You will need: 100 g of gray yarn (50% wool, 50% polyacrylic, 200 m/100 g); hook No. 4; large black button for decoration.

Description of work

Knit a flat bottom in the round as follows: close a chain of 4 VPs into the SS ring and make 6 RLS in it. Then knit the 2nd circular row, doubling the number of loops (12 sc). Continue working according to the pattern in 6 circular rows, starting with 1 VP lift and ending with a connecting loop, and adding 6 RLS in each row. When the diameter of the bottom becomes 15 cm, continue knitting the flat part without any increments using the pattern according to pattern 7. Determine the desired height of the cap by fitting. Knit a headband along the bottom edge - 2 rows of sc.

Next, divide the fabric into three parts and start knitting the visor RLS, approximately on one third of the loops of the last row (minus 2-3 cm, it is best to determine the length of the initial segment for the visor individually by fitting). Tie the visor, forming a rounding, as shown in diagram 6 a. For decoration, knit a strip of dc 25 cm long, place it above the visor and secure it on the left side with a button, and on the right side with invisible stitches.

The summer months bring joy to both adults and children. You can spend whole days outside, blissfully under the warm sun. But the influence of the daytime celestial body is not always beneficial, so mothers begin to think about how to cover their baby’s head. Prolonged exposure to the rays threatens with undesirable consequences - from deterioration in health to sunstroke. A cap for a boy with a hook for the summer, knitted by a caring mother, will protect the baby from the troubles of summer days.

The headdress is knitted easily and simply; even a novice craftswoman can handle it. You can knit several caps for each outfit.

We crochet a simple cap for a boy for the summer with our own hands

Not everyone is ready to watch a knitting video, preferring a verbal description of the model. The diagram for the description will make it clear.

Let's look at how to knit the simplest cap for a boy.

First of all, you should focus on the yarn. The best yarn is cotton. Products made from natural material allow air to pass through well, so your child will not feel hot in them.

1) To begin with, a chain of air loops is typed. Then it closes into a ring, and the product continues to be knitted from top to bottom.

2) In the first row, three additional loops are cast on for lifting. Then the row is knitted with double crochets. The hook is inserted into the center of the ring of air loops. The row ends with a connecting column.

3) Subsequently, the product is knitted according to the pattern. Rows 12–19 are performed in the same way.

4) The next 20th row consists of double crochets, each of which is performed on a double crochet and chain stitch of the previous row.

5) In the 21st and 22nd rows, the product is processed around the perimeter with single crochets.

6) To make a tie, 32 air loops are cast on in the 23rd row. Loops 31 and 32 are lifting loops. On the remaining 30 loops, a row of single crochets is knitted. After which, continuing to knit in the circle, not reaching the end of the row of 15 loops, the second tie is knitted. Having made the last single crochet for tying, a connecting stitch is made in the loop of the 22nd row. The base for the cap is ready!

7) The visor is made separately from the cap, then it is attached to it using posts.

Knitting begins with a set of 27 air loops. In the presented diagram, the following designations are used: single crochets are shown as crosses, ticks with a cross are shown as increases. Increasing means knitting two stitches into one base loop. To achieve rigidity of the visor, you can add a thin fishing line to the thread.

The “marine” theme becomes most relevant in the summer. So why not knit a cap for a boy in a nautical style.

Unlike the previous model, this product will require two colors of yarn, these can be standard blue and white. But no one forbids using others.

1) The headdress is knitted from above. The beginning is standard - a chain of air loops (5 pieces), closed into a ring using a connecting loop.

2) The next rows are performed with single crochets in a circle. To increase, you should make an increase in each loop, that is, knit two single crochets from one loop of the previous row. To ensure that the top of the cap is flat and does not bend, adding loops is done according to the rule:

• in the 1st and 2nd rows the increase is made in each loop;
• in the 3rd row, increase every three loops;
• in the 4th row, increase every four loops;
• starting from the 5th row, the increase is done in random order.

Loops are added until a circle with a diameter of 17 cm is knitted (for a boy 4–5 years old).

To make the cap match the nautical theme, you need to alternate rows: 2 rows of blue yarn, 2 rows of white. The last loop of a row of each color is a connecting stitch, the beginning of a row of a new color is an air loop.

3) To knit the side walls of the cap base, decrease the loops. To reduce the number of loops in a row, you need to skip one of the loops of the previous row, that is, simply do not knit it. It is enough to decrease one loop in each row. The rows also continue to be performed in single crochet stitches with sea stripes. You need to finish the cap with yarn of the same color, knitting it in 5-6 rows.

4) The visor will be immediately attached to the base. Having determined the loop corresponding to the middle of the hat, 10 loops retreat from it to the right. From this point continue to knit as follows: 4 single crochets, 4 half double crochets, 4 single crochets, 4 half double crochets, 4 single crochets, connecting loop.

5) The second row of the visor is made with single crochets, at the end - a connecting stitch.

6) The next 3rd row is knitted similarly to the 1st (see point 4), and the subsequent ones - similarly to the 2nd (see point 5).

7) The final stage is decorating the cap. To do this, knit a strip of white yarn and a “steering wheel”. Decorative elements are sewn onto the finished cap

Let's look at the main options for decorating a cap with appliqués

To make a boy’s cap more elegant, it is decorated with appliqués or decorative buttons.

Video on the topic of the article

I kept puzzling over how to knit a visor... Of course, there are many ways to sew a visor from two parts, knitting a tight visor straight from the cap, but I didn’t like these options. Firstly, I wanted the seam between the two parts to not look rough. The best option, in my opinion, is to not have it at all. Secondly, I wanted the visor to keep its shape, like a real baseball cap. It became clear that the visor should be knitted with a cover. So, I took Igor’s cap, which he wore in the summer, and traced the shape of the visor. Then I knitted the sample with single crochets, transferred the visor pattern onto it in full size and calculated this handicap in single crochets. By the way, the density of my knitting with single crochets, Semenovskaya “Carolina”, crochet No. 3 30SbnX42 rows = 10X10cm. I started knitting the visor from the top of his head, i.e. central top edge. To do this, I knitted a chain of air loops and began tying it in a circle. The point is that two parts of the visor are knitted at the same time. Having knitted a row in one part, I knitted a sc (this is instead of a seam) and, continuing knitting in the circle, immediately knitted a row in another part, at the end of this row again a sc (instead of a seam on the other side). I knitted in a spiral so that the seam from the connecting posts was not visible. Although...if it’s difficult to count all the time, you can close the long circular row with a connecting post, and then place it at the bottom of the visor. I knitted in a spiral - it’s not for nothing that I spent so long thinking about how to achieve the absence of a seam. This is what the beginning of knitting looks like. You can already fold this piece in half and notice how the cover for the future visor will emerge. In order for the shape to be exactly like the visor of a baseball cap, the resulting cover needs to be tied to these corners. Upon closer examination, it turned out that the visor does not have a flat base at all, but a curved one. Therefore, I continued to give it the correct shape. On the other hand, I knitted another corner symmetrically... I almost forgot - due to the fact that I was still knitting in the circle, each new row when knitting a corner began without turning the work, but from the same edge. This is necessary in order not to disturb the texture of the fabric knitted in a circle. This is what the finished visor case looks like. Now what remains is the curved shape. Of course, it would be great to insert a ready-made plastic visor from a previous, outdated cap into this case. I didn't find anything like that. So I cut out a shape from a plastic 2 liter bottle. The visor from the bottle needs to be cut a little smaller than the cover, but not much. The cover should fit the visor. We insert the visor into the case. We sew the visor around the edge, while hiding all the threads inside once and for all. And we sew the visor to the cap itself. The plastic in the bottle is soft; when sewn to the cap itself, it will easily take the desired shape around the cap itself. About the cap itself. In order for her to also hold the cap like a baseball cap, it was decided to knit it with single crochets. The head circumference of my Igor, who is now 2.5 years old, is 47-48 cm. Therefore, the bottom was knitted with a diameter of 14 cm. The additions were made according to the same principle as in the bottom example. Then I knitted without increasing until the length of the cap reached 13cm. In width, with a bottom of 14 cm, it turned out to be 24 cm. However, due to the fact that the cap is quite dense, it was possible to measure this only by folding the cap in four, and not in half. I decided to decorate the bottom edge of the cap with a stripe like this, alternating colors. At the same time, when changing the thread, the last technique of crocheting a double crochet was performed with a thread of a new color. From the wrong side, the non-working thread was pulled along the fabric. This option of pulling the thread, in turn, gave a little extra density to the bottom edge. I did not describe the cap - the main thing here is to maintain the required proportions in centimeters. I am posting a description of the visor. At the same time, I would like to draw your attention to the fact that I calculated it according to my knitting density, let me remind you once again that this is 30SbnX42 rows = 10X10cm with crochet No. 3 Semenovskaya “Carolina”, so check your knitting density before you start knitting. In any case, I think this description will help you tie your visor or do your calculations. Maybe I’m not the discoverer of this method of knitting a visor, but I haven’t come across anything similar yet. I will be glad if you find my description and my story about the story with the visor useful.

A cap is a universal headdress that never goes out of style. Many women and girls believe that only cap-shaped headwear is suitable for them. They add special charm and playfulness to the look. The trend is knitted caps that match the season - warm for spring/autumn, fur for winter and openwork for summer.

Features of crochet caps

The cap is versatile because depending on the yarn you can create a warm or very light summer cap. Warm caps are knitted from thick blended or woolen yarn. You can even make a fleece lining for the cap. Fur caps are especially chic. Summer caps can be knitted with simple single crochets, mesh, and even using the Irish lace technique. Summer caps are best crocheted from cotton or linen.

The cap is a great alternative to simple knitted hats. Caps are suitable for both young girls and older women. Depending on the shape of the cap, it can be worn on different hairstyles. A crocheted cap is suitable for either a sporty or classic style.

Crochet cap patterns

• Baseball cap. It is characterized by a large, hard, semicircular visor. The shape of the crown itself is tight-fitting.
• A slouchy cap, like a beanie. Such a cap may have a small visor, without a solid shape, or sloping to one side.
• Classic cap (like a driver's cap).

Crochet baby caps

If you don’t yet have experience in knitting a cap, you can practice on children’s models. In addition, there are many more children's caps with descriptions and master classes on the Internet. Caps are crocheted for both boys and girls.

A knitted cap on a boy will look much more organic than a beanie, for our taste. Caps in a nautical style, a classic cap, an openwork cap, a cap with flowers and rhinestones, a duck cap, etc. Not only different shapes but also a variety of color combinations you will find when you choose a crochet cap pattern.

Crochet cap, works of our readers

Red cap for my beloved daughter. Head volume 50 cm. Yarn: red NAKO Bambino (25% wool, 75% acrylic, 50g/130m) one whole skein was used and a little from the second for the visor; white yarn Pekhorka Children's New (100% acrylic, 50g/200m)

Summer is coming very soon, and this is the time for vacations and trips to the sea! My original idea is a cap for a boy and a panama hat for a girl in a nautical style. Knitted from 100% mercerized cotton, decorative buttons were used for decorations,

Good afternoon, needlewomen! My name is Natalya. Today I post my work for the first time. I have been interested in knitting for about 20 years. This year I knitted summer hats for the first time. I took the cap pattern from a magazine. Threads are 100% cotton. Thread consumption

Cap size: for OG 49-51 cm. For knitting you will need: 100 g of cotton with acrylic (50% cotton, 5% polyacrylic, 125 m/50 g), hook No. 3.5. To start knitting, close 4VP into the ring with a connecting stitch. Do 2 VP lifts

To knit a cap you will need: 50 g of yellow yarn, 25 g of green and red, a little black and brown (100% cotton, 170m/50g for motifs and Bruges ribbons, 250m/50g for mesh); hooks No. 1;

A white cap for a boy - the work of Olga Sverdlova was submitted to the competition in the category "hats for boys". Cap size 52-54. The cap is knitted according to the yarn pattern Pekhorka - Brilliant Summer (100g. 380m.) 1 skein, hook No. 2. Cap knitting pattern:

Hello! My name is Alexandra. For the competition I knitted a cap for a boy. This is such a charming hooligan I turned out to be. I used 100% cotton thread and a No. 2 hook. Cap size: 48-50. The cap is knitted very quickly and easily!! Cap knitting pattern:

Hello! My name is Tatyana Sakadina. I would like to show you my work for the summer hat competition. The cap was knitted for my friend’s son (about 1 year old, head circumference 42-44 cm). I needed: threads - acrylic 100% 100

Hello! My name is Yanina, I live in Cherkassy (Ukraine). Knitting is a hobby and recreation for me. I love crocheting. So I decided to submit my work to the competition. We also wanted to get ready for the football Euro. The idea was spotted on the Internet and made for

"Hello! My son is almost two years old. To participate in the competition, I knitted him this green cap." - writes Irina. You will need: Semenovskaya yarn "Lily" (mercerized cotton - 100%) - 50g green and the rest of blue,

Knitted baseball caps are a model for women who want to look sporty and youthful even in the winter season. Crocheting a baseball cap is not at all difficult. Knitted baseball cap "Creative 3" So, let's start knitting a baseball cap.

Crocheted Rastafarian cap - the work of Tatyana Belenkaya (Tonika). The cap is knitted to order; Tatyana does not plan to wear it herself. The cap is knitted with single crochets without broaches. The bottom diagram can be seen in the article Jacquard hat with poppies. Tatiana

Bright crocheted cap - the work of Svetlana (LuchikSveta). I knitted this cap to order, they told me: “Make something beautiful, I trust your taste.” After looking through magazines with napkin patterns, I chose a suitable base and the result was an openwork cap.

Knitted cap for a girl - the work of Marina Milokumova. Marina writes that she crocheted a cap for the first time, and her daughter liked it so much that she asked for a scarf as well. YarnArt Color Garden (40% wool, 60% acrylic) -

Hello! My name is Svetlana. I am from the city of Omsk. I want to show you my work. I knitted this coat and cap for my son for the summer. Knitted cap for a boy. Knit according to the pattern in a circle of the required size. Next, knit 4-5 rows

Yarn consumption: 150 g of p/w yarn (220 m/50 g), red, orange, yellow, light green, blue and dark blue in 3 folds for a beret and 300 g for a scarf. Hook No. 4.5. Tie with thread in 3 folds 70

Knitted cap size: head circumference 56 cm. You will need: 100% wool yarn, color 155m/50 g, three colors (orange - A, yellow - B and brown - C) 50 g each; hook No. 3; plastic visor and

Crochet cap, models from the Internet

Crochet cap for girls. How to knit a visor

Cap for a girl with a flower and a rhinestone in the shape of a heart.

Crochet cap for boy

Yarn SOSO-white and Kamtex-blue and blue (same yardage as SOSO)

Bottom 16cm (on average 50cm; 3 years old), hook 1.5.

Stylish crochet cap

You will need: 220 g of cream yarn; hook number 5.

Crochet cap for girls /by Marina Piskulina/

What kind of girl would be in the spring without a cap? flirt This little girl will definitely welcome spring in a new hat, or rather a cap.

Material: CHARM Vita Cotton (100% mercerized cotton), 3 skeins, hook number 5. Knit with thread in three layers (from three balls).

Crochet red cap for boy

We thank Zvezdochka from Osinka for the description! According to this description, even a beginning knitter can crochet a cap.

Crochet women's cap

You will need: 100 g blue Oro yarn (50% wool, 50% cotton, 115 m/50 g); hook No. 5.5; 2 white buttons with a diameter of 2.8 cm.

How to knit a cap:

Using crochet number 5.5, knit 4 initial airs. p., perform 15 tbsp. s/n in 1st air. p. and close 1 connection into a ring. Art. to the 4th air. p. = 1st circular r. 2nd circular row: 3 initial air. p., double each loop, while performing alternately 1 relief st. s/n, made behind the front and back walls (= st. s/n, while inserting the hook from front to back or back to front around the st. s/n of the previous circular row, respectively) = 30 p. + 3 initial air. p., they are considered 1 loop = 31 p.

Mark the beginning of the round. Next, knit in spiral circular rows, while constantly shifting the pattern by 1 p. and doubling 39 times every 5th p. = 70 p. Then knit without adding. Approximately 18 cm from the cast-on edge, finish with 1 circular r. Art. b/n. For the upper side of the visor, opposite the beginning of the circular row, start with a new thread in two folds and perform 22 stitches. b/n, while inserting the hook only behind the front walls of the loops. Next knit st. b/n in straight rows, with 1 stitch less in each row on both sides. After 5 r. from the beginning of tying, finish the work.

Knit the underside of the visor in the same way, but insert the hook behind the back walls of the loops. Tie the edge of the cap with 1 circular p. Art. b/n, while connecting the upper and lower sides of the visor. Using a thread in 3 additions, tie a chain of air. p. 15 cm long and sew it to the base of the visor. Sew buttons to the ends of the chain.

Crochet captain's cap for baby

Crochet cap with cones

Description of the model: OG46-50cm, size varies depending on the yarn and the size of the bottom.

The cap, in my opinion, turned out to be very original, the visor is reinforced, so it does not wrinkle or deform when worn.

You will need:

• yarn “Yarn Art” Gold white (92% acrylic, 8% metallic polyester / 100 g)
• hook No. 2 (I have an Addi hook)
• sewing thread and needle
• silicone thread for beading and a large needle - these are needed so that the product stays on the head better (especially if it’s a little big) and does not stretch
• knitwear for lining (an old T-shirt, for example, will come in handy)
• To strengthen the visor, for example, a corner folder (in two layers) or a plastic napkin for hot food is suitable.

Crochet duck cap. Author Rozetka

The pattern is the simplest - fillet mesh, double crochet through one air loop.

Master class on crocheting a cap for a girl

Materials used: Soft Cotton yarn (Vita Cotton) white 1 skein, remains of blue and pink Alize Bell, green VITA cotton COCO yarn, half beads, monofilament, fishing line 0.3 and 1 mm, elastic band, hook.

Two crochet caps for boys

Crochet women's cap

Crochet caps with patterns from Japanese magazines:

Crochet cap, job description

Using pattern 26, knit the bottom of the cap.

Attention! The diagram shows 18 rows with expansion.

Depending on the thickness of the yarn, as well as the knitting density. You can increase (decrease) the number of rows of the bottom. After its diameter is 32 cm, knit one or two rows exactly, and then start decreasing along the same lines where there were increases on the bottom. The principle of making decreases is shown in diagram 26 a. The width of the decrease area should be about 9 cm, that is, approximately such that the circumference of the lower edge of the cap is equal to the circumference of the head. After this, make the final fit on the head by knitting several rows of SC (1.5 cm in height), as well as a twisted cord 120 cm long and pulled along the lower edge of the headdress.

Then calculate the visor by making a sample in stocking stitch, and knit it from two identical parts using partial knitting, first with shortened rows and then with longer ones (for the principle of calculating and knitting the visor, see the description of mod 1). Insert the knitted plastic visor inside and sew it to the finished cap. From yarn, cut threads 40 cm long, weave them into braids (4 pieces), sew them to the center of the bottom. Embroider the side of the cap with rhinestones. Attach one of them to the top of your head.

Twisted cord
Cut several strands of yarn that are three times the length of the cord you need. Tie both ends, pulling the threads with equal force. Hook or pin one end to something and insert a knitting needle into the other. Rotate the knitting needle until the threads are twisted properly. Fold the cord in half, keeping it taut to prevent it from tangling. Tie both ends together, let the cord twist, and then straighten the strands. Model by Roman Delivron.

Video crochet cap

Crochet baby cap

This cap model is suitable for both boys and girls. Cap size: for OG 50 cm.

The visor is plastic. The cap is crocheted No. 2 with single crochets from Kirovsky Mill Vialka yarn (75g/220m). Keeps its shape perfectly and is suitable for knitting hats and bags.

Crochet cap for summer

The cap is knitted from bobbin yarn (300m/100g), hook number 2 and 1.5. The upper part is crocheted No. 2, and the visor No. 1.5.
The size of the cap for exhaust gas is 50 cm.

The video should load here, please wait or refresh the page.

Women's crochet cap

Yarn 100% cotton, 75g/220m, hook number 2. You will need 130g of yarn. On exhaust gas 54 cm.

The video should load here, please wait or refresh the page.

To have a custom hat, you don’t have to look for something rare in stores. Almost any accessory can be made with your own hands, for example, crocheting a cap with your own hands. There are a lot of options for knitting caps, and only you can decide how it will look, it all depends on your imagination and desire. If you have never knitted caps before, we recommend starting with the simplest option - single crochet.

There is nothing complicated in the process of knitting such a cap; a novice needlewoman who knows what a hook and yarn is can handle it.

Before you start knitting, you should decide on the color of the cap and size, as well as prepare the necessary items.

We will need:

• cotton yarn – 100 grams;
• suitable hook;
• tape measure;
• threads with a needle;
• paper template;
• plastic bottle.

How to crochet a simple cap using single crochets, description for beginners

The first step is to knit the bottom of the cap. To do this, we knit 6 single crochets under the amigurumi ring. Next we continue knitting according to the pattern:

Determining the size of the bottom of the cap is easy. To do this, the head circumference measurement must be divided by 3.14 and 1.5 cm subtracted from this measurement.

After the bottom, we knit the base of the cap using single crochet stitches without increases or decreases to the desired depth of the cap, which is determined during fitting.

The cap can have different shapes, depending on the number of loops, the pattern used, the thickness of the threads, etc.:

You can use this template:

In addition to the paper template, we also need a plastic bottle. In order for the visor to have the correct shape, the paper template must be attached to the bottle, traced around it and cut out.

You can tie a visor in different ways. Here are a few schemes to choose from:

You need to knit two parts of the visor, then pin them along the paper markings, and steam them through a damp cloth with a low-heat iron.

Along the edge of the flap, the visor should be sewn with hand stitches or connected using a hook.

The next step is to insert the plastic template into the finished visor, then sew the visor along the bottom edge and sew it to the cap itself. In order for the visor on the cap to be well secured and have a high-quality bend, it is worth using a regular ball of a suitable diameter. Carefully place our cap on the ball, align the visor, and sew it to the base.

Our crocheted cap with single crochets is ready. Now it needs to be carefully washed and dried. To prevent the cap from losing its shape after washing, it is better to dry it on the same ball on which the visor was sewn. If desired, a knitted cap can be starched, then its shape will last longer. The presented example of a headdress is universal and perfect for everyone.

As you can see, there is nothing complicated about crocheting a cap. By following the knitting rules, you will get an excellent head accessory option. Give free rein to your imagination and create miracles!

To clearly see the whole process, we suggest watching a video of crocheting a summer cap with single crochets for a girl: