Modular origami Christmas tree. Christmas tree from origami modules Show how to make an origami Christmas tree out of paper

Step-by-step instructions on origami or how to fold a Christmas tree.

Origami

Herringbone

Craft materials:
The most important thing in this craft is to choose colorful paper. The example is shown with regular paper, but we would advise you to use ready-made New Year's paper or paint watercolor paper with New Year's colors. Watercolor paper is very thick and difficult to fold, but the effect is worth the effort.

	Here is an example of painted Christmas tree paper. For the snow effect, you can use wax; for dark inclusions, we used salt, pouring it onto a damp, painted sheet.
	1. Cut out a square sheet from the blank and fold it in all directions. Horizontally, vertically and diagonally. Let's expand.
	2. Using ready-made fold lines, we fold a basic origami model - a triangle - from a square sheet. We wrote more about how to fold a triangle in the article -.
	3. Mark the middle of the right triangle with a fold line, folding it in half, as in the photo. Let's expand.
	4. Using the fold line, turn it inside out (turn the corner so that the lowermost corner is in the center of our main triangle. (See photo)
	5. Bend the corner to the right. In this way we process all our four corners in the main triangle.
	6. After all the corner bends, you should get a figure like this.
	7. Next we need scissors. We cut off the bottom of the diamond either entirely or modeling the leg of the Christmas tree. We make three cuts on each side. The cuts are made not to the middle and parallel to the base of the future tree.
	8. We bend each cut resulting rectangle inward diagonally, forming triangles. Be sure to do it in one direction on all sides of the tree.

We straighten the resulting tree and you can decorate it. For decoration, you can use confetti cut with a hole punch, gold hairspray, glitter and other New Year's paraphernalia.

Origami lovers will not miss this opportunity.

The word Origami comes from two words ori meaning "folding" and kami meaning "paper". Origami technique is the traditional Japanese art of folding various paper sculptures. The art of origami began to develop in the 17th century. AD in Japan, and in our time has spread widely across all continents and countries.

This master class with video will show you how to make a Christmas tree using the 3D origami technique. To do this, you will first need to assemble triangular origami from white and green paper.

Video 1: triangular modules for 3D origami, assembly diagram

Video 2: modular origami Christmas tree

Simple origami Christmas tree

This master class is much simpler than the previous one. The Christmas tree is made from a sheet of green paper using scissors, although this technique is not used in classic origami.

You will need a 20x20 square of double-sided paper. It will make a Christmas tree 12 cm high.

Step-by-step instructions in pictures:

We make a square, fold it in half, connecting opposite corners. Then there is the basic design common in origami - a triangle with nested internal angles.

The Christmas tree will be octagonal. After making the cuts, make sure that all the folds are in the same direction.

You can make several Christmas trees and place them wherever you like.

Origami- the art of assembling various paper crafts. This type of creativity was invented in Japan. However, over time, other countries began to make their own adjustments to this type of creativity. For example, the Chinese came up with modular origami. Its essence lies in the fact that all crafts are assembled from identical triangular modules. Thanks to this, you can get a very large voluminous craft.

To make a simple paper Christmas tree you will need 1 sheet of paper. You can take a sheet of green paper or a sheet of white paper and then color it.

Steps to complete this craft:

Cut off the excess part of sheet A, you should get a square.
Bend the resulting square diagonally.
Connect the two sides of this square with a diagonal fold line.
Make one accordion fold down the middle of your tree.
Turn the resulting workpiece over.
Bend the bottom end of your tree so that it faces you.
Make another accordion fold. It should fit between the two horizontal folds you already have.
Make small cuts at the bottom to create the trunk of your tree.
Turn your tree over and decorate it.

This is the most a simple version of a Christmas tree. Every student can do it in 2 minutes. If you want to make a more beautiful craft, read the following sections.

Making a Christmas tree from cardboard

From cardboard You can make a Christmas tree of absolutely any size. To do this you need cardboard, tape, glue, scissors and paints. The sequence of actions when making a Christmas tree from cardboard:

Cut out 4 trapezoids. The upper base of this trapezoid should be half the size of the lower one.
Cut out 2 squares from cardboard. The first is for connecting the lower bases of the trapezoids, and the second is for the upper bases.
First, tape the bottom bases of all the trapezoids to the sides of the large square.
Tape all the sides of the trapezoids together with tape.
Carefully glue a small square to the top of the resulting product.
You will get a voluminous trapezoid.
To get a Christmas tree you need to make several more of these trapezoids. The topmost part is a pyramid. This pyramid will have a square base.
After you have made all the trapezoids and the pyramid, you need to glue them together.
To do this, lubricate the upper base of the largest trapezoid with glue. Place the next trapezoid on it with its lower base.
Glue all the parts together this way.
After all the components of the tree are glued together, you need to paint it.

To make your Christmas tree more beautiful, you can glue something to it. By the way, your Christmas tree will look much more beautiful if there is a star on its top.

Cut out two stars from paper. Place a pencil or some kind of stick between them, after smearing these stars with glue. Paint the resulting piece red and stick it into the top of the piece. Congratulations, your Christmas tree is ready!

This craft is the most beautiful And spectacular. Firstly, it is voluminous. Secondly, it looks most like a Christmas tree. It is made from special modules in the shape of triangles. It's very easy to make them. To do this, you need to watch a video that lasts one minute.

You can choose the size of these modules yourself. For example, if you want your Christmas tree to be the size of a real one, you can make one module from A4 sheet. However, most often 16 or 32 triangular modules are made from an A4 sheet.

Detailed instructions making a Christmas tree from modules with your own hands:

You need to make a branch. Take two modules and insert the two closest corners into both pockets of the third module.
Insert one corner of the next module into each of the closest pockets of the two previous modules.
Assemble the twig, alternating between 2 modules and 1 in each row.
One branch is assembled from 12 rows of dark green modules.
The last two rows must be made light green.
Next, you need to make lateral processes. To do this, you need to collect branches from five rows. They are assembled according to the same principle as the previous branch. The main thing is that the last two rows are light green.
Take a large branch consisting of 12 rows. Step back three rows and place the two side extensions on the protruding corners of the modules.
It is necessary to make 5 such branches with lateral shoots.
Next, you need to connect these branches together. To do this you will need 5 modules.
You need to insert a wooden stick into the center of the resulting ring.
Make four intermediate rings. They are made from 14 modules according to the same principle as the branches were connected into one ring.
Make 4 more rings from the twigs. However, now these branches should be shorter. The second ring should be made of 10 rows, the third of 8, the fourth of 6, and the fifth of 4.
Place all the rings on the stick one by one, not forgetting to put on the intermediate rings.
Make the top for the Christmas tree. It is done in exactly the same way as a branch of 8 rows.
Put on the top of your head.

Of course, at first glance, doing crafts may seem very difficult, but it is not so. Moreover, it is very exciting and fun, unless, of course, you do it alone.

To avoid the hassle of cutting out modules from paper, buy a special set of modular origami. The kit will include instructions and supplies.

Most people perceive information much better visually. Therefore, to better understand how to make this craft, you can watch a video with a master class.

Modular origami is a great way to develop fine motor skills and cheer up. Try to engage your children in this activity, because it is very useful for improving motor skills, attention and concentration.

Now you know how to make a paper Christmas tree using origami. Thanks to this, you will be able to create and maintain a New Year's mood, as well as make your children happy. I wish you success!

Attention, TODAY only!

The green Christmas tree is the main guest at the New Year holiday. We could not ignore this issue and today we have an origami Christmas tree. This needlework technique is quite popular today. Modular origami forest beauty can become a wonderful gift or simply decorate the interior of your home.

Tools and materials Time: 3 hours Difficulty: 3/10

green A4 sheets – 23 pieces;
A4 sheets of light green color - 16 pieces;
stationery knife;
PVA glue;
wooden skewers - 3 pieces;
polystyrene foam - a small piece;
scotch;
corrugated paper.

This origami Christmas tree looks very elegant and festive.

Step-by-step master class

The origami Christmas tree is made from triangular modules, which must be made in advance in the required quantity: green - 354 pieces, light green - 254 pieces.

In our work we will use sheets of green and light green colors in A4 format.

Step 1: divide the sheets

Before starting, divide a sheet of paper into 16 rectangles.

Step 2: cut into squares

We cut with a stationery knife, trying to keep the edges even.

Step 3: making modules

We make a module according to a certain scheme. Fold the rectangle in half horizontally.

We fold the resulting double strip vertically again. And we unfold, thus marking a line in the middle.

We lower the upper corners along the center line.

We turn the resulting part over.

We lift the lower part of the workpiece towards the triangle.

We return the lower part of the workpiece and bend the lower corners.

Using the folded corners, we bend the lower part again and fold the part in half. The module is ready.

We produce the required number of green and light green modules.

Step 4: collecting branches

The modules are ready, let's start assembling the first branch. Let's take two parts and insert them into two pockets of the third module. While working, apply a small drop of glue to the modules so that the product does not fall apart later.

In the third row we add two modules: we insert the free ends of the part of the second row into the side pockets of the other two modules.

In the fourth row we add one module using its two pockets.

Fifth row + two modules. And so we alternate one or two modules, creating a branch of 12 rows. The last two rows use light green colored blanks. When assembling a branch, you do not need to push the module tightly onto the module. But it is better to squeeze the joints more tightly. Before the glue has completely grabbed the paper, the twig needs to be slightly bent.

Step 5: make shoots

Now you need to make the lateral shoots. We make a branch of 5 rows, alternating one or two modules. The last two rows are light green.

This is what the lateral process looks like when finished.

You need to make 2 of these shoots.

We retreat three needles from the beginning of the central branch and insert the lateral shoots onto the fourth, making sure to use glue. This is what the finished branch looks like.

You need to make 5 such branches.

Step 6: fasten the branches

Now they need to be fastened into one ring. To do this, take the connecting module and insert it into the free outer pockets of the two branches. We fasten with glue. We connect the remaining branches in a similar way.

This is what the first ring looks like.

The second ring will be slightly smaller. The central branch will consist of 12 rows, as in the first circle, and the side branches will consist of only 3 (4 light green modules).

We fasten the lateral processes, as in the first ring. We make 5 such branches. We connect all the prepared branch blanks into one circle using the method described above.

We make the third circle. The central branch consists of 10 rows. Lateral processes follow the example of the second circle. In total you need to make 5 branches of this type.

We connect the branches using a connecting module. We get the third ring.

Let's start making the fourth ring. The branches of this row will be much smaller, only 8 rows and without lateral shoots. The last two rows are made of light green modules.

Also makes 5 branches. We fasten them with connecting modules.

The fifth ring will be even smaller. The central branch consists of only 6 rows; there is no need to make lateral branches.

We make five twig blanks and connect them into one ring.

You need to make 4 such intermediate rings.

Step 7: Making the Top

Now we will make the top from green and light green modules. Alternating one or two modules, make a branch of 10 rows (the first one is green).

For splendor, glue two more green modules on the sides.

Step 8: Assembling the Christmas tree

All details are ready. We make a stand and a trunk and you can start assembling the Christmas tree.

Now we take three wooden skewers and fasten them with tape or adhesive tape.

We wrap the skewers with a green strip of corrugated paper.

We insert the finished “trunk” into a rectangular piece of foam.

We put on the largest ring first.

We continue to wear circle after circle, not forgetting about the intermediate rings.

The final touch is the top. The origami Christmas tree is ready!

Such an origami New Year tree will undoubtedly decorate the New Year holiday and lift the spirits of all family and guests. You can also watch the video to see how to do it.

Many people have heard about the origami technique, but not everyone has encountered it in practice. Today, origami-style crafts are again popular and in demand, like other hand-made products. In addition, origami is accessible to everyone: both adults and children.

You should start the process of creating origami with simple crafts. For example, you can make a simple origami Christmas tree for beginners. Such activities, as a rule, bring a lot of positive emotions, develop logic and creativity, aesthetic taste and fine motor skills.

The main goal of origami is the process of learning this technique, creating crafts and using them in playful forms, developing logic, attention and perseverance, training memory and imagination.

Making a craft in the form of a beautiful three-dimensional Christmas tree is quite simple and not at all difficult. To prepare such a gift for your loved one, you will need a little diligence and patience. In addition, you can do origami together, and you can also attend a master class and learn in practice how to make an origami Christmas tree.

To create an origami Christmas tree, you will need the following materials: a sheet of green paper on both sides measuring 21x21 cm, a ruler, a simple pencil and scissors.

Master class on creating a Christmas tree

You can create an origami Christmas tree with your own hands using our step-by-step recommendations:

Step 1. Take a sheet of paper (colored on both sides) in the shape of a square with a side length of 21 cm, fold along all existing diagonals, the square should be divided into 8 parts.

Step 2. Fold the square into a triangle, divided by fold lines into 4 parts.

Step 3: Form a diamond shape by tucking the corners of the triangle's base inside it.

Step 4. Place the diamond in front of you with the fold lines (edges) facing up and fold them towards the fold line diagonally across the diamond to form the base of the tree, first on one side, then flip it over and repeat.

Step 5. At this stage you need to create eight sides from four. To do this, return the bent sides to their previous position, carefully press the fold line of the rib and bend it inward. Do this to all four ribs. As a result, there should be eight ribs.

Step 6. In the resulting figure in the form of an accordion, cut off the excess edges on the inside, and bend the corners of the outer elements inside the Christmas tree. In the photo of the step-by-step creation of an origami Christmas tree, you can study and repeat in practice each step of this creative process to make your task easier.

Step 7. Turn the Christmas tree upside down and straighten all the edges, the trunk with eight separate branches is ready.

Step 8. Place the folded structure in the form of a triangle in front of you, and cut the paper on both sides perpendicular to the trunk, not reaching the center of the tree about 5 mm, parallel with an interval of 10 mm.

Step 9. Bend the corners of the cuts diagonally (from the upper inner corner to the lower outer). This operation is performed for each branch of the Christmas tree.

Step 10. Bend the bent corners back and bend them inside the branches. Repeat this for each cut on the branches of the Christmas tree. As a result, the paws of the Christmas tree will be voluminous, as if fluffy.

Step 11. The forest beauty is ready and looks great.

The trunk of the Christmas tree can be glued from the inside, then the craft will become more compact. Well, now you have learned how to make an origami Christmas tree, if you still have any questions, you can use other instructions located on the sites.

In addition, you can make a modular origami Christmas tree, i.e. a Christmas tree consisting of many small parts (modules). As a result of using modular technology in the origami process, crafts are voluminous.

Origami is a very fun and exciting creative process that every person should try in their life or get their children interested in it. In addition, this does not require huge financial costs at all; all you need is desire and a little free time.

A variety of origami crafts can be found on websites. Perhaps these will be beautiful spring flowers, figurines of animals or birds, and other objects. However, you should start with small and simple schemes.

Try it and you will definitely like it! Please your loved ones with handmade crafts!